3.4 - 30
3.4
TEST SYMBOL CONDITIONS 1/ GROUP A LIMITS Units
-55 °C < TC <+125 °C Subgroups MIN MAX
VS = +40 V dc
unless otherwise specified 3/
Supply Current ISVIN = 0 V dc, G = 100, 2/ 1,2 50 mA
+RCL= 1.0 W VCM = 0 V dc 3 100
Input Offset Voltage VOS VIN = 0 V dc, G = 100, 2/ 1 -12.0 +12.0 mV
VS= +10 V dc, + RCL= 1.0 W2 -18.5 +18.5
3 -17.2 +17.2
VIN = 0 V dc, G = 100, 2/ 1 -6.0 +6.0 mV
VS= +40 V dc, + RCL= 1.0 W2 -12.5 +12.5
3 -11.2 +11.2
VIN = 0 V dc, G = 100, 2/ 1 -7.0 +7.0 mV
VS= +45 V dc, + RCL= 1.0 W2 -13..5 +13.5
3 -12.2 +12.2
Input Bias Current, +IN +IBVIN = 0 V dc, 1 30.0 nA
RBIAS <100 MW2 70.0
3 115.0
Input Bias Current, -IN -IBVIN = 0 V dc, 1 30.0 nA
RBIAS <100 MW2 70.0
3 115.0
Input Offset Current IOS VIN = 0 V dc, 1 30.0 nA
RBIAS <100 MW2 70.0
3 115.0
Output Voltage VOVS= +45 V dc, IO= 80 mA, 4,5,6 40 V
RL = 500 W
VS= +14 V dc, IO= 8 A, 5,6 8 V
RL = 1 W
VS= +16 V dc, IO= 10 A, 4 10 V
RL = 1 W
Current Limits ICL RL = 6 W, + RCL= 1.0 W, 2/ 4 0.6 .89 A
VS= +14 V dc
Stability/noise ENG = 1, VS= + 40 V dc, CL = 1.5 nF 4,5,6 1.0 mV
Slew rate SRRL = 500 W, = + 40 V dc, VIN > 4 V p-p 4,5,6 2.5 10.0 V/ms
Open loop gain AOL RL = 500 W, VS= +40 V dc, f = 15 Hz, 4,5,6 96 dB
VIN >.4 V p-p
Common mode rejection CMR VS= +15 V dc, f = dc 4,5,6 74 dB
VCM = +9 V dc
1) During all testing, terminal connection F.O. (pin 7) is left open.
2) A current limiting resistor (RCL) is connected between CL+ to the output and CL - to the output during
these tests.
3) See MIL-H-38524 for definition.
OMA512SKB OMA512SKCB OMA512SDB
ELECTRICAL PERFORMANCE CHARACTERISTICS