..........................Document #: 38-07255 Rev . *D Page 2 of 9
Pin Summary
Pin Name Pins Pin Description
SEL_DDR 48 Input to configure for DDR-ONLY mode or STANDARD SDRAM
mode.
1 = DDR-ONLY mode.
0 = STANDARD SDRAM mode.
When SEL_DDR is pulled HIGH or configured for DDR-ONL Y mode, pin
4, 5, 6, 7, 10, 11,15, 16, 19, 20, 21, 22, 27, 28, 29, 30, 33, 34, 38, 39,
42, 43, 44 and 45 will be configured as DDR outputs.
Connect VDD3.3_2.5 to a 2.5V power supply in DDR-ONLY mode.
When SEL_DDR is pulled LOW or configured for STANDARD SDRAM
output, pin 4, 5, 6, 7, 10, 11, 15, 16, 19 and 20, 21, 22 will be configured
as STANDARD SDRAM outputs.Pin 27, 28, 29, 30, 33, 34, 38, 39, 42,
43, 44 and 45 will be configured as DDR outputs.
Connect VDD3.3_2.5 to a 3.3V power supply in STANDARD SDRAM
mode.
SCLK 25 SMBus clock input
SDATA 24 SMBus data input
BUF_IN 13 Reference input from chipset. 2.5V input for DDR-ONLY mode; 3.3V
input for STANDARD SDRAM mode.
FBOUT 1Feedback clock for chipset. Output voltage depends on VDD3.3_2.5V .
PWR_DWN# 36 Active LOW input to enable power-down mode; all outputs will be
pulled LOW.
DDR[6:11]T 28, 30, 34, 39, 43, 45 Clock outputs. These outputs provide copies of BUF_IN.
DDR[6:11]C 27, 29, 33, 38, 42, 44 Clock outputs. These outputs provide complementary copies of
BUF_IN.
DDR[0:5]T_SDRAM
[10,0,2,4,6,8] 4, 6, 10, 15, 19, 21 Clock outputs. These outputs provide copies of BUF_IN. V oltage swing
depends on VDD3.3_2.5 power supply.
DDR[0:5]C_SDRAM
[11,1,3,5,7,9] 5, 7, 11, 16, 20, 22 Clock outputs. These outputs provide complementary copies of
BUF_IN when SEL_DDR is active. These outputs provide copies of
BUF_IN when SEL_DDR is inactive. V oltage swing depends on
VDD3.3_2.5 power supply.
VDD3.3_2.5 2, 8, 12, 17, 23 Connect to 2.5V power supply when W255 is configured for
DDR-ONLY mode. Conn ect to 3.3V power supply, when W25 5 is
configured for standard SDRAM mode.
VDD2.5 32, 37, 41, 47 2.5V voltage supply
GND 3, 9, 14, 18, 26, 31, 35, 40, 46 Ground