CMF (Military RN and RL) Vishay Dale Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL FEATURES * Very low noise (- 40 dB) * Very low voltage coefficient (5 ppm/V) * Controlled temperature coefficient * Flame retardant epoxy coating * Commercial alternatives to military styles are available with higher power ratings. See appropriate catalog or web page. STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE(R) MILITARY APPROVED VALUE RANGE () MIL STYLE VISHAY DALE MODEL MAXIMUM WORKING VOLTAGE DIELECTRIC STRENGTH VAC MIL-R-10509 CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E MIL-PRF-22684 RN50 CMF50 200 - 10R - 100K 10R - 100K - 450 RN55 CMF55 200 10R - 301K 49R9 - 100K 49R9 - 100K - 450 RN60 CMF60 300 10R - 1M 49R9 - 499K 49R9 - 499K - 500 RN65 CMF65 350 10R - 2M 49R9 - 1M 49R9 - 1M - 900 RN70 CMF70 500 10R - 2.49M 24R9 - 1M 24R9 - 1M - 900 RL07 CMF07 250 - - - 51R - 150K 450 RL20 CMF20 350 - - - 4R3 - 470K 700 Note * Vishay Dale commercial value range: Extended resistance ranges are available in commercial equivalent types. Please contact us by using the email at the bottom of this page. TECHNICAL SPECIFICATIONS PARAMETER UNIT CONDITION Voltage Coefficient ppm/V 5 when measured between 10 % and full rated voltage Insulation Resistance 1010 min. dry; 108 min. after moisture test Operating Temperature Range C - 65/+ 175 (see derating curves for military range) Terminal Strength Ib 5 pound pull test for RL07/RL20; 2 pound pull test for all others Solderability www.vishay.com 48 Continuous satisfactory coverage when tested in accordance with MIL-R-10509 and MIL-PRF-22684 For technical questions, contact: ff2bresistors@vishay.com Document Number: 31027 Revision: 03-Jul-08 CMF (Military RN and RL) Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RN60D3483FR36 (preferred part numbering format) R MIL STYLE N 6 0 3 4 8 RESISTANCE VALUE 3 digit significant figure, followed by a multiplier 10R0 = 10 2152 = 21.5 k 2494 = 2.49 M CHARACTERISTIC RN50 RN55 RN60 RN65 RN70 D E = 25 ppm C = 50 ppm D = 100 ppm 3 F R TOLERANCE CODE B = 0.1 % C = 0.25 % D = 0.5 % F=1% 3 6 PACKAGING SPECIAL Blank = Standard B14 = Tin/Lead, Bulk (Dash Number) BSL = Tin/Lead, Bulk, Single Lot Date Code R36 = Tin/Lead, T/R (Full) RE6 = Tin/Lead, T/R (1000 pieces) RSL = Tin/Lead, T/R, Single Lot Date Code Historical Part Number example: RN60D3483F (will continue to be accepted) RN60 MIL STYLE D 3483 F CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE R36 PACKAGING New Global Part Numbering: RL07S471JR36 (preferred part numbering format) R L 0 MIL STYLE LEAD MATERIAL RL07 RL20 S = Solderable 7 S 4 7 RESISTANCE VALUE 2 digit significant figure, followed by a multiplier 4R3 = 4.3 202 = 2.0 k 474 = 470 k 1 J R 3 TOLERANCE CODE G=2% J=5% 6 PACKAGING B14 = Tin/Lead, Bulk BSL = Tin/Lead, Bulk, Single Lot Date Code R36 = Tin/Lead, T/R (Full) RE6 = Tin/Lead, T/R (1000 pieces) RSL = Tin/Lead, T/R, Single Lot Date Code Historical Part Number example: RL07S471J (will continue to be accepted) RL07 S 471 J MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE MATERIAL SPECIFICATIONS Element: Nickel-chrome alloy Coating: Flame retardant epoxy, formulated for superior moisture protection Environmental performance is shown in the Environmental Performance table. Test methods are those specified in MIL-R-10509 and MIL-PRF-22684. Standard lead material is solder-coated copper. Solderable and weldable. APPLICABLE MIL-SPECS MIL-R-10509 and MIL-PRF-22684: The CMF models meet or exceed the electrical, environmental and dimensional requirements of MIL-R-10509 and MIL-PRF-22684. Noise: Vishay Dale metal film resistors have exceptionally low noise level. Average for standard resistance range is 0.10 V per V over a decade of frequency, with low and intermediate resistance values typically below 0.05 V per V. Shelf Life: Resistance shifts due to storage at room temperature are negligible. Vishay Dale CMF resistors have an operating temperature range of - 65 C to + 175 C. They must be derated according to the following curves: % OF RATED POWER Termination: Fire-cleaned high purity ceramic PACKAGING ENVIRONMENTAL SPECIFICATIONS General: Core: R36 120 100 MIL-R-10509 Char. D Rating 80 MIL-R-10509 Char. C & E Rating 60 40 20 MIL-PRF-22684 0 CAGE CODE: 91637 50 70 DERATING Document Number: 31027 Revision: 03-Jul-08 For technical questions, contact: ff2bresistors@vishay.com 90 110 130 150 170 AMBIENT TEMPERATURE C www.vishay.com 49 CMF (Military RN and RL) Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL Vishay Dale DIMENSIONS in inches [millimeters] 1.50 0.125 [38.10 3.18] A D C (Max.) VISHAY DALE MODEL CMF50 CMF55 CMF60 CMF65 CMF70 CMF07 CMF20 B A B C (Max.) D 0.150 0.020 [3.81 0.51] 0.240 0.020 [6.10 0.51] 0.344 0.031 [8.74 0.79] 0.562 0.031 [14.27 0.79] 0.562 0.031 [14.27 0.79] 0.240 0.020 [6.10 0.51] 0.375 0.040 [9.53 1.02] 0.065 0.015 [1.65 0.38] 0.090 0.008 [2.29 0.20] 0.145 0.015 [3.68 0.38] 0.180 0.015 [4.57 0.38] 0.180 0.015 [4.57 0.38] 0.090 0.008 [2.29 0.20] 0.145 0.015 [3.68 0.38] 0.244 [6.20] 0.278 [7.06] (1) 0.425 [10.80] 0.687 [17.45] 0.687 [17.45] 0.278 [7.06] 0.425 [10.80] 0.016 0.002 [0.41 0.05] 0.025 0.002 [0.64 0.05] 0.025 0.002 [0.64 0.05] 0.025 0.002 [0.64 0.05] 0.032 0.002 [0.81 0.05] 0.025 0.002 [0.64 0.05] 0.032 0.002 [0.81 0.05] Note (1) 0.290" [7.37] for 0.25 % and 0.1 % resistance tolerances MILITARY POWER RATING MILITARY QUALIFIED MIL-R-10509 WATTAGE AT + 70 C (D) RN55 RN60 RN65 RN70 0.05 0.10 0.125 0.25 0.50 1.0 MIL-PRF-22684 AT + 125 C (C and E) RN50 RN55 RN60 RN65 RN70 - AT + 70 C RL07 RL20 - Note * Commercial equivalents of military styles are available with higher power ratings. Consult factory. 100 HEAT RISE The increase in resistors surface temperature due to rated load is shown in the chart above. Resistor temperature = heat rise + ambient temperature. HEAT RISE (C) 80 60 3/4 W 40 1/2 W 1/2 W 1/4 W 20 1/8 W 1/4 W 1/10W 1/8 W CMF55 CMF07 CMF60 CMF20 1/4 W 0 www.vishay.com 50 CMF65 CMF70 For technical questions, contact: ff2bresistors@vishay.com Document Number: 31027 Revision: 03-Jul-08 CMF (Military RN and RL) Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL Vishay Dale MARKING Characteristics: D = 100 ppm, C = 50 ppm, E = 25 ppm Tolerance: F = 1 %, D = 0.5 %, C = 0.25 %, B = 0.1 % Value = three significant figures and multiplier J = JAN (joint Army - Navy) brand RN50: (3 lines) J50D 1211 F137 RN55, RN60, RN65, RN70 (4 lines) DALE 0137J RN55D 1211F JAN, type, characteristic Value Tolerance and 3 digit date code Company Logo 4 digit date code and JAN brand Type and characteristic Value and Tolerance Note * RL series are color banded per MIL-PRF-22684 PERFORMANCE REQUIREMENT MIL-R-10509 MIL-PRF-22684 CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E + 200 - 500 ppm/C 50 ppm/C 25 ppm/C 200 ppm/C 100 ppm/C 50 ppm/C 25 ppm/C 200 ppm/C MILmax. MILmax. MILmax. MILmax. Thermal Shock 0.50 % R 0.25 % R 0.25 % R 1.00 % R Short Time Overload 0.50 % R 0.25 % R 0.25 % R 0.50 % R Low Temperature Operation 0.50 % R 0.25 % R 0.25 % R 0.50 % R Moisture Resistance 1.50 % R 0.50 % R 0.50 % R 1.50 % R Shock 0.50 % R 0.25 % R 0.25 % R 0.50 % R Vibration 0.50 % R 0.25 % R 0.25 % R 0.50 % R Load Life 1.00 % R 0.50 % R 0.50 % R 2.00 % R Dielectric Withstanding Voltage 0.50 % R 0.25 % R 0.25 % R 0.50 % R Effect of Solder 0.50 % R 0.10 % R 0.10 % R 0.50 % R MIL Temperature Coefficient Applicable Vishay Dale Temperature Coefficient TEST Document Number: 31027 Revision: 03-Jul-08 For technical questions, contact: ff2bresistors@vishay.com www.vishay.com 51 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1