www.vishay.com For technical questions, contact: ff2bresistors@vishay.com Document Number: 31027
48 Revision: 03-Jul-08
CMF (Military RN and RL)
Vishay Dale
Metal Film Resistors, Military, MIL-R-10509 Qualified,
Type RN and MIL-PRF-22684 Qualified, Type RL
FEATURES
•Very low noise (- 40 dB)
•Very low voltage coefficient (5 ppm/V)
•Controlled temperature coefficient
•Flame retardant epoxy coating
•Commercial alternatives to military styles are available
with higher power ratings. See appropriate catalog or web
page.
Note
•Vishay Dale commercial value range: Extended resistance ranges are available in commercial equivalent types. Please contact us by using the
email at the bottom of this page.
STANDARD ELECTRICAL SPECIFICATIONS
MIL
STYLE
VISHAY
DALE
MODEL
MAXIMUM
WORKING
VOLTAGE
VISHAY DALE® MILITARY APPROVED VALUE RANGE (Ω)
DIELECTRIC
STRENGTH
VAC
MIL-R-10509
CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E MIL-PRF-22684
RN50 CMF50 200
- 10R - 100K 10R - 100K - 450
RN55 CMF55 200
10R - 301K 49R9 - 100K 49R9 - 100K - 450
RN60 CMF60 300
10R - 1M 49R9 - 499K 49R9 - 499K - 500
RN65 CMF65 350
10R - 2M 49R9 - 1M 49R9 - 1M - 900
RN70 CMF70 500
10R - 2.49M 24R9 - 1M 24R9 - 1M - 900
RL07 CMF07 250
---
51R - 150
K 450
RL20 CMF20 350
---
4R3 - 470
K 700
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CONDITION
Voltage Coefficient ppm/V 5 when measured between 10 % and full rated voltage
Insulation Resistance Ω≥ 1010 min. dry; ≥ 108 min. after moisture test
Operating Temperature Range °C - 65/+ 175 (see derating curves for military range)
Terminal Strength Ib 5 pound pull test for RL07/RL20; 2 pound pull test for all others
Solderability Continuous satisfactory coverage when tested in accordance
with MIL-R-10509 and MIL-PRF-22684
Document Number: 31027 For technical questions, contact: ff2bresistors@vishay.com www.vishay.com
Revision: 03-Jul-08 49
CMF (Military RN and RL)
Metal Film Resistors, Military, MIL-R-10509 Qualified,
Type RN and MIL-PRF-22684 Qualified, Type RL Vishay Dale
GLOBAL PART NUMBER INFORMATION
MIL STYLE TOLERANCE
CODE
RN50 E = 25 ppm 3 digit significant B = ± 0.1 %
RN55 C = 50 ppm figure, followed by C = ± 0.25 %
D = ± 0.5 %
0 R 0 1 = 10 Ω
2 5 1 2 = 21.5 k Ω
2494 = 2.49 M Ω
New Global Part Numbering: RN60D3483FR36 (preferred part numbering format)
RN 6 0D 3 4 83FR36
Historical Part Number example: RN60D3483F (will continue to be accepted)
3483DRN60
MIL STYLE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE PACKAGING
RN65
RN70
RN60
= 100 ppm a multiplier
D
F =
±
1 %
Blank = Standard
(Dash Number)
R36F
PACKAGING SPECIAL
CHARACTERISTIC RESISTANCE
VALUE
B14 = Tin/Lead, Bulk
BSL = Tin/Lead, Bulk,
Single Lot Date Code
R36 = Tin/Lead, T/R (Full)
RE6 = Tin/Lead, T/R (1000 pieces)
RSL = Tin/Lead, T/R,
Single Lot Date Code
MIL STYLE TOLERANCE
CODE PACKAGING
RL07 S = Solderable 2 digit significant G = ± 2 %B14 = Tin/Lead, Bulk
BSL = Tin/Lead, Bulk, Single Lot Date Code
R36 = Tin/Lead, T/R (Full)
RE6 = Tin/Lead, T/R (1000 pieces)
RSL = Tin/Lead, T/R, Single Lot Date Code
RL20 figure, followed byJ = ± 5 %
a multiplier
4R3 = 4.3 Ω
202 = 2.0 k Ω
474 = 470 k Ω
New Global Part Numbering: RL07S471JR36 (preferred part numbering format)
Historical Part Number example: RL07S471J (will continue to be accepted)
MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE PACKAGING
RL07S471JR36
RL07 S 471 J R36
LEAD MATERIAL RESISTANCE
VALUE
MATERIAL SPECIFICATIONS
Element: Nickel-chrome alloy
Coating:Flame retardant epoxy, formulated for
superior moisture protection
Core: Fire-cleaned high purity ceramic
Termination: Standard lead material is solder-coated
copper. Solderable and weldable.
APPLICABLE MIL-SPECS
MIL-R-10509 and MIL-PRF-22684: The CMF models meet or
exceed the electrical, environmental and dimensional requirements
of MIL-R-10509 and MIL-PRF-22684.
Noise: Vishay Dale metal film resistors have exceptionally low
noise level. Average for standard resistance range is 0.10 µV per V
over a decade of frequency, with low and intermediate resistance
values typically below 0.05 µV per V.
CAGE CODE: 91637
ENVIRONMENTAL SPECIFICATIONS
General:
Environmental performance is shown in the
Environmental Performance table. Test
methods are those specified in MIL-R-10509
and MIL-PRF-22684.
Shelf Life: Resistance shifts due to storage at room
temperature are negligible.
Vishay Dale CMF resistors have an operating temperature range of
- 65 °C to + 175 °C. They must be derated according to the
following curves:
REWOP DET
AR
F
O
%
AMBIENT TEMPERATURE
°
C
120
100
80
60
40
20
0
50 70 90 110 130 150 170
MIL-R-10509
Char. C & E Rating
MIL-R-10509
Char. D Rating
MIL-PRF-22684
DERATING
www.vishay.com For technical questions, contact: ff2bresistors@vishay.com Document Number: 31027
50 Revision: 03-Jul-08
CMF (Military RN and RL)
Vishay Dale Metal Film Resistors, Military, MIL-R-10509 Qualified,
Type RN and MIL-PRF-22684 Qualified, Type RL
Note
(1) 0.290" [7.37] for ± 0.25 % and ± 0.1 % resistance tolerances
Note
• Commercial equivalents of military styles are available with higher power ratings. Consult factory.
DIMENSIONS in inches [millimeters]
A
B
D
C
(Max.)
1.50 ± 0.125
[38.10 ± 3.18]
VISHAY DALE
MODEL AB C
(Max.) D
CMF50 0.150 ± 0.020
[3.81 ± 0.51]
0.065 ± 0.015
[1.65 ± 0.38]
0.244
[6.20]
0.016 ± 0.002
[0.41 ± 0.05]
CMF55 0.240 ± 0.020
[6.10 ± 0.51]
0.090 ± 0.008
[2.29 ± 0.20]
0.278
[7.06] (1)
0.025 ± 0.002
[0.64 ± 0.05]
CMF60 0.344 ± 0.031
[8.74 ± 0.79]
0.145 ± 0.015
[3.68 ± 0.38]
0.425
[10.80]
0.025 ± 0.002
[0.64 ± 0.05]
CMF65 0.562 ± 0.031
[14.27 ± 0.79]
0.180 ± 0.015
[4.57 ± 0.38]
0.687
[17.45]
0.025 ± 0.002
[0.64 ± 0.05]
CMF70 0.562 ± 0.031
[14.27 ± 0.79]
0.180 ± 0.015
[4.57 ± 0.38]
0.687
[17.45]
0.032 ± 0.002
[0.81 ± 0.05]
CMF07 0.240 ± 0.020
[6.10 ± 0.51]
0.090 ± 0.008
[2.29 ± 0.20]
0.278
[7.06]
0.025 ± 0.002
[0.64 ± 0.05]
CMF20 0.375± 0.040
[9.53 ± 1.02]
0.145 ± 0.015
[3.68 ± 0.38]
0.425
[10.80]
0.032 ± 0.002
[0.81 ± 0.05]
MILITARY POWER RATING
WATTAGE
MILITARY QUALIFIED
MIL-R-10509 MIL-PRF-22684
AT + 70 °C
(D)
AT + 125 °C
(C and E) AT + 70 °C
0.05 - RN50 -
0.10 - RN55 -
0.125 RN55 RN60 -
0.25 RN60 RN65 RL07
0.50 RN65 RN70 RL20
1.0 RN70 - -
HEAT RISE
The increase in resistors surface temperature due to rated
load is shown in the chart above. Resistor temperature =
heat rise + ambient temperature.
3/4 W
1/2 W
1/4 W
1/2 W
1/4 W
1/8 W
1/4 W
1/8 W
1/10 W
CMF55
CMF07
CMF60
CMF20
CMF65
CMF70
100
80
60
40
20
0
HEAT RISE (°C)
Document Number: 31027 For technical questions, contact: ff2bresistors@vishay.com www.vishay.com
Revision: 03-Jul-08 51
CMF (Military RN and RL)
Metal Film Resistors, Military, MIL-R-10509 Qualified,
Type RN and MIL-PRF-22684 Qualified, Type RL Vishay Dale
Note
• RL series are color banded per MIL-PRF-22684
MARKING
Characteristics: D = 100 ppm, C = 50 ppm, E = 25 ppm
Tolerance: F = 1 %, D = 0.5 %, C = 0.25 %, B = 0.1 %
Value = three significant figures and multiplier
J = JAN (joint Army - Navy) brand
RN50: (3 lines) RN55, RN60, RN65, RN70 (4 lines)
J50D
1211
F137
JAN, type, characteristic
Value
Tolerance and 3 digit date code
DALE
0137J
RN55D
1211F
Company Logo
4 digit date code and JAN brand
Type and characteristic
Value and Tolerance
PERFORMANCE
REQUIREMENT MIL-R-10509 MIL-PRF-22684
CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E
MIL Temperature Coefficient + 200 - 500 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C
Applicable Vishay Dale
Temperature Coefficient ± 100 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C
TEST MILmax. MILmax. MILmax. MILmax.
Thermal Shock ± 0.50 % ΔR± 0.25 % ΔR± 0.25 % ΔR± 1.00 % ΔR
Short Time Overload ± 0.50 % ΔR± 0.25 % ΔR± 0.25 % ΔR± 0.50 % ΔR
Low Temperature Operation ± 0.50 % ΔR± 0.25 % ΔR± 0.25 % ΔR± 0.50 % ΔR
Moisture Resistance ± 1.50 % ΔR± 0.50 % ΔR± 0.50 % ΔR± 1.50 % ΔR
Shock ± 0.50 % ΔR± 0.25 % ΔR± 0.25 % ΔR± 0.50 % ΔR
Vibration ± 0.50 % ΔR± 0.25 % ΔR± 0.25 % ΔR± 0.50 % ΔR
Load Life ± 1.00 % ΔR± 0.50 % ΔR± 0.50 % ΔR± 2.00 % ΔR
Dielectric Withstanding Voltage ± 0.50 % ΔR± 0.25 % ΔR± 0.25 % ΔR± 0.50 % ΔR
Effect of Solder ± 0.50 % ΔR± 0.10 % ΔR± 0.10 % ΔR± 0.50 % ΔR
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
