CE W005G THRU W10G
CHENYI ELECTRONICS SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.5A
FEATURES
Ideal for printed circuit board
High surge capcability 60A peak
High case dielectric strength
MECHANICAL DATA
. Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
. Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
. Polarity: Polarity symbol marked on body
. Mounting position: any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 , unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL W005G W01G W02G W04G W06G W08G W10G units
Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000 v
Maximum RMS Voltage Vrms 35 70 140 280 420 560 700 v
Maximum DC blocking Voltage Vdc 50 100 200 400 600 800 1000 v
Maximum Average Forward Rectified
current at Ta=50 If(av) A
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load Ifsm A
Maximum Instantaneous Forward Voltage at
forward current 1.5A Vf V
Maximum DC Reverse Voltage Ta=25 A
at rated DC blocking voltage Ta=125 Ir m A
Tyoical Junction Capacitance(Note 1) Cj 24 pF
Operating Temperature Range Tj
Storage and operation Junction Temperature Tstg
Note:
1.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
1.0
-55 to +125
-55 to +150
1.5
50
1.0
10.0
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2
CE W005G THRU W10G
CHENYI ELECTRONICS SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.5A
RATINGS AND CHARACTERISTIC CURVES W005G THRU W10G
FIG.1-DERATING CURVE FIG.2-MAXIMUM NON-REPETITIVE PEAK
OUTPUT RECTIFIED CURRENT FORWARD SURGE CURRENT PER LEG
FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS
PER LEG PER LEG
FIG.5-TYPICAL JUNCTION CAPACITANCE FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE
PER LEG
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2
