STRVSX ST repetitive voltage suppressor Datasheet - production data Applications A A * MOSFET protection * IGBT protection * Auxiliary power supply K K SMB STRVS185X02B DO-15 STRVS185X02E STRVS225X02E STRVS241X02E The STRVSX series is a TVS family created to provide simple and effective solutions for designers working on circuits that require protection from repetitive overvoltage. A A K Description SMC STRVS118X02C STRVS248X02C The STRVSX series is highly reliable and suits applications where the surge frequency makes the protected device temperature increase, for example, MOSFET protection in fly back configuration. K DO-201 STRVS142X02F STRVS182X02F STRVS222X02F STRVS252X02F STRVS280X02F Features * Clamping voltage characteristics defined at 25 C, 85 C and 125 C Additional support for designers using these devices is available in the STMicroelectronics application note AN4209: "Design methodology for repetitive voltage suppressors (RVS) in repetitive mode: STRVS". * Stand-off voltage range: from 85 V to 188 V * Low leakage current: 0.2 A at 25 C Table 1. Device summary Order codes Clamping voltage Package IPP = 2 A (125 C) * Maximum operating junction temperatures: - SMB and SMC: 150 C - DO-15 and DO-201: 175C STRVS118X02C 118 V SMC STRVS142X02F 142 V DO-201 Complies with the following standards: STRVS182X02F 182 V DO-201 * IEC 61000-4-2 level 4 - 15 kV (air discharge) - 8 kV (contact discharge) STRVS185X02B 185 V SMB STRVS185X02E 185 V DO-15 STRVS222X02F 222 V DO-201 STRVS225X02E 225 V DO-15 STRVS241X02E 241 V DO-15 STRVS248X02C 248 V SMC STRVS252X02F 252 V DO-201 STRVS280X02F 280 V DO-201 * MIL-STD-883, method 3015, class 3B: - 25 kV HBM (human body model) * MIL-STD-750, method 2026 solderability * EIA STD RS-481 and IEC 60286-3 packing (surface mount packages) September 2015 This is information on a product in full production. DocID023950 Rev 4 1/14 www.st.com Characteristics 1 STRVSX Characteristics Table 2. Absolute maximum ratings (Tamb = 25 C) Symbol Tj Tstg TL Parameter Value Unit Operating junction temperature range (SMB and SMC) -55 to 150 C Operating junction temperature range (DO-15 and DO-201) -55 to 175 C Storage temperature range (SMB and SMC) -65 to 150 C Storage temperature range (DO-15 and DO-201) -65 to 175 C Maximum lead temperature for soldering during 10 s (SMB and SMC) 260 C Maximum lead temperature for soldering during 10 s at 5 mm from case (DO-15 and DO-201) 260 C Value Unit Table 3. Thermal resistances Symbol Rth(j-l) Rth(j-a) Parameter SMB 13 SMC 12 DO-15 35 DO-201 23 SMB(1) 185 SMC(1) 150 DO-15 105 DO-201 100 Junction to leads C/W Junction to ambient 1. On printed circuit with recommended pad layout Figure 1. Electrical characteristics - definitions Symbol VBR = IRM = VRM = VCL = VCL0 = IPP IF VF Rd T 2/14 = = = = = I Parameter IF Breakdown voltage Leakage current @ VRM Stand-off voltage VCL VCL0 VBR VRM Clamping voltage at IPP VF Clamping voltage where Rd line crosses current axis IRM IR Peak pulse current Forward current Forward voltage Slope: V/I = Rd IPP Dynamic resistance Voltage temperature coefficient on VBR DocID023950 Rev 4 V STRVSX Characteristics Table 4. Electrical characteristics - values Order code IRM max @ VRM (25 C) VBR @ IR(1) (25 C) Min. IPP VCL @ Ipp VCL0 Rd(2) Max. mA A V V 10-4/C Max. A V STRVS118X02C 0.2 85 95 105 1 2 118 116 1.0 10.6 STRVS142X02F 1 102 114 126 1 2 142 140 1.0 10.7 STRVS182X02F 1 128 143 158 1 2 182 177 2.5 10.8 0.2 128 143 158 1 2 185 178 2.5 10.8 STRVS222X02F 1 154 171 189 1 2 222 213 4.5 10.8 STRVS225X02E 0.5 154 171 189 1 2 225 214 5.5 10.8 STRVS241X02E 0.5 171 190 210 1 2 241 234 3.5 10.8 STRVS248X02C 0.5 171 190 210 1 2 248 238 5.0 10.8 STRVS252X02F 1 171 190 210 1 2 252 239 6.5 10.8 STRVS280X02F 1 188 209 231 1 2 280 263 8.5 10.8 STRVS185X02B/E V T Values @ 125 C (typ.) 1. To calculate VBR at a given junction temperature, use the following formula: VBR @ Tj = VBR @ 25 C x (1 + T x (Tj - 25)) 2. Rd = (VCL - VCL0)/IPP Figure 2. Clamping voltage versus peak pulse current - STRVS118X02C (typical values) 10 IPP (A), TJ = 25 C, 85 C, 125 C Figure 3. Clamping voltage versus peak pulse current - STRVS142X02F (typical values) I (A), TJ = 25 C, 85 C, 125 C 10 PP 8 8 6 6 4 4 2 0 100 2 VCL (V) 105 110 115 120 125 0 120 DocID023950 Rev 4 VCL (V) 125 130 135 140 145 150 3/14 14 Characteristics STRVSX Figure 4. Clamping voltage versus peak pulse current - STRVS182X02F (typical values) Figure 5. Clamping voltage versus peak pulse current - STRVS185X02B/E (typical values) I (A), TJ = 25 C, 85 C, 125 C 10 PP I (A), TJ = 25 C, 85 C, 125 C 10 PP 8 8 6 6 4 4 2 2 0 150 VCL (V) 155 160 165 170 175 180 185 190 195 VCL (V) 0 150 160 170 180 190 200 210 Figure 6. Clamping voltage versus peak pulse current - STRVS222X02F (typical values) Figure 7. Clamping voltage versus peak pulse current - STRVS225X02E (typical values) I (A), TJ = 25 C, 85 C, 125 C 10 PP I (A), TJ = 25 C, 85 C, 125 C 10 PP 8 8 6 6 4 4 2 2 0 180 VCL (V) 190 200 210 220 230 240 0 180 190 200 210 220 230 240 VCL (V) 250 260 Figure 8. Clamping voltage versus peak pulse current - STRVS241X02E (typical values) Figure 9. Clamping voltage versus peak pulse current - STRVS248X02C (typical values) I (A), TJ = 25 C, 85 C, 125 C 10 PP I (A), TJ = 25 C, 85 C, 125 C 10 PP 8 8 6 6 4 4 2 2 0 200 4/14 VCL (V) 210 220 230 240 250 260 0 200 DocID023950 Rev 4 VCL (V) 210 220 230 240 250 260 270 STRVSX Characteristics Figure 10. Clamping voltage versus peak pulse Figure 11. Clamping voltage versus peak pulse current - STRVS252X02F current - STRVS280X02F I (A), TJ = 25 C, 85 C, 125 C 10 PP I (A), TJ = 25 C, 85 C, 125 C 10 PP 8 8 6 6 4 4 2 2 VCL (V) 0 200 210 220 230 240 250 260 270 280 Figure 12. Leakage current versus junction temperature (typical values) STRVSxxxC 10000 IR (nA) VCL (V) 0 220 230 240 250 260 270 280 300 310 Figure 13. Leakage current versus junction temperature (typical values) STRVSxxxF 10000 VR = VRM IR (nA) VR = VRM 1000 1000 100 100 10 10 1 1 Tj (C) 0,1 25 50 75 100 125 Tj (C) 150 Figure 14. Leakage current versus junction temperature (typical values) STRVSxxxB 10000 290 IR (nA) 0,1 25 50 75 100 125 175 Figure 15. Leakage current versus junction temperature (typical values) STRVSxxxE 10000 VR = VRM IR (nA) VR = VRM 1000 1000 100 100 10 10 1 1 Tj (C) 0,1 25 150 50 75 100 125 Tj (C) 150 0,1 25 DocID023950 Rev 4 50 75 100 125 150 175 5/14 14 Characteristics STRVSX Figure 16. Thermal resistance junction to Figure 17. Thermal resistance junction to ambient versus copper surface of connections - ambient versus copper surface of connections SMB SMC Rth(j-a) (C/W) 200 Rth(j-a) (C/W) 200 180 180 160 160 140 140 120 120 100 100 80 80 60 60 40 40 Copper surface (cm2) 20 Copper surface (cm2) 20 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 Figure 18. Thermal resistance junction to Figure 19. Thermal resistance junction to ambient versus copper surface of connections - ambient versus copper surface of connections DO-15 DO-201 150 Rth(j-a) (C/W) 150 100 100 50 50 Rth(j-a) (C/W) Copper surface (cm2) Copper surface (cm2) 0 0 0 6/14 1 2 3 4 5 0 DocID023950 Rev 4 1 2 3 4 5 STRVSX 2 Package information Package information * Epoxy meets UL94, V0 * Lead-free package * Polarity: band indicates cathode * Terminals: solder plated, solderable as per MIL-STD-750, method 2026 In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 2.1 SMB package information Figure 20. SMB dimension definitions E1 D E A1 A2 C L b Table 5. SMB dimension values Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 1.95 2.20 0.077 0.087 c 0.15 0.40 0.006 0.016 D 3.30 3.95 0.130 0.156 E 5.10 5.60 0.201 0.220 E1 4.05 4.60 0.159 0.181 L 0.75 1.50 0.030 0.059 DocID023950 Rev 4 7/14 14 Package information STRVSX Figure 21. SMB Footprint, dimensions in mm (inches) Figure 22. SMB marking layout Cathode bar ( unidirectional devices only ) e x x x z y ww 8/14 DocID023950 Rev 4 e: ECOPACK compliance XXX: Marking Z: Manufacturing location Y: Year WW: week STRVSX 2.2 Package information SMC package information Figure 23. SMC dimension definitions E1 D E A1 C E2 A2 L b Table 6. SMC dimension values Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 2.90 3.20 0.114 0.126 c 0.15 0.40 0.006 0.016 D 5.55 6.25 0.218 0.246 E 7.75 8.15 0.305 0.321 E1 6.60 7.15 0.260 0.281 E2 4.40 4.70 0.173 0.185 L 0.75 1.50 0.030 0.059 Figure 24. SMC footprint, dimensions in mm (inches) 1.54 (0.061) 5.11 (0.201) 1.54 (0.061) 3.14 (0.124) 8.19 (0.322) Figure 25. SMC marking layout Cathode bar ( unidirectional devices only ) e x x x z y ww DocID023950 Rev 4 e: ECOPACK compliance XXX: Marking Z: Manufacturing location Y: Year WW: week 9/14 14 Package information 2.3 STRVSX DO-15 package information Figure 26. DO-15 dimension definitions C C A D B Table 7. DO-15 dimension values Dimensions Ref. 10/14 Millimeters Inches Min. Max. Min. Max. A 6.05 6.75 0.238 0.266 B 2.95 3.53 0.116 0.139 C 26 31 1.024 1.220 D 0.71 0.88 0.028 0.035 DocID023950 Rev 4 STRVSX 2.4 Package information DO-201 package information Figure 27. DO-201 dimension definitions B A B OD OC Table 8. DO-201 dimension values Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 8.5 9.5 0.335 0.374 B 25.4 OC 4.8 5.3 0.189 0.209 OD 0.96 1.06 0.038 0.042 1 DocID023950 Rev 4 11/14 14 Ordering information 3 STRVSX Ordering information Figure 28. Ordering information scheme ST RVS VVV X II B ST: STMicroelectronics Repetitive voltage suppressor Clamping voltage 118 = 118 V @ IPP = 2 A Version X = Single diode Peak pulse current 02 = 2 A Package B = SMB, C = SMC, E = DO-15, F = DO-201 Table 9. Ordering information Order code 12/14 Marking Package Weight Base qty. Delivery mode STRVS118X02C R118C SMC 0.25 g 2500 Tape and reel STRVS142X02F R142F DO-201 0.90 g 600 Ammopack STRVS182X02F R182F DO-201 0.90 g 600 Ammopack STRVS185X02B R185B SMB 0.12 g 2500 Tape and reel STRVS185X02E R185E DO-15 0.40 g 1000 Ammopack STRVS222X02F R222F DO-201 0.90 g 600 Ammopack STRVS225X02E R225E DO-15 0.40 g 1000 Ammopack STRVS241X02E R241E DO-15 0.40 g 1000 Ammopack STRVS248X02C R4248C SMC 0.25 g 2500 Tape and reel STRVS252X02F R252F DO-201 0.90 g 600 Ammopack STRVS280X02F R280F DO-201 0.90 g 600 Ammopack DocID023950 Rev 4 STRVSX 4 Revision history Revision history Table 10. Document revision history Date Revision Changes 05-Mar-2013 1 Initial release. 18-Apr-2013 2 Insertion of Table 1. 15-Oct-2013 3 Updated Table 1. 14-Sep-2015 4 Updated features on cover page and Figure 21. Updated Table 3, Table 4, Table 6 and Table 9. Minor text changes. DocID023950 Rev 4 13/14 14 STRVSX IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2015 STMicroelectronics - All rights reserved 14/14 DocID023950 Rev 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STRVS142X02F STRVS182X02F STRVS185X02E STRVS222X02F STRVS225X02E STRVS241X02E STRVS252X02F STRVS280X02F STRVS118X02C STRVS185X02B STRVS248X02C