CL32B225KBJNNNF - Samsung [Electro-Mechanics]

SPECIFICATION

 Supplier : Samsung electro-mechanics  Samsung P/N : CL32B225KBJNNNF

 Product : Multi-layer Ceramic Capa citor  Description : CAP, 2.2㎌, 50V, ±10%, X7R, 1210

CL 32 B225 K B J N N N F

① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪

①Series Samsung Multi-layer Ceramic Capacitor

②Size 1210 (inch code) L: 3.2 ± 0.3 mm W: ± 0.2 mm

③Dielectric X7R ⑧Inner electrode

④Capacitance 2.2 ㎌Termination

⑤Capacitance ±10 % Plating (Pb Free)

tolerance ⑨Product Normal

⑥Rated Voltage 50 V ⑩Special Reserved for future use

⑦Thickness 2.5 ± 0.2 mm ⑪Packaging Embossed Type,13"reel(4,000ea)

A. Samsung Part Number

2.5

Sn 100%

B. Samsung Reliability Test and Judgement condition

Capacitance Within specified tolerance 1㎑±10% 1.0±0.2Vrms

Tan δ (DF) 0.025 max.

Insulation More than 500Mohm㎌Rated Voltage 60~120 sec.

Resistance

Appearance No abnormal exterior appearance Visual inspection

Withstanding No dielectric breakdown or of the rated voltage

Voltage mechanical breakdown

Temperature X7R

Characteristics (From -55℃ to 125℃, Capacitance change should be within ±15%)

Adhesive Strength No peeling shall be occur on the 500gF, for 10±1 sec.

of Termination terminal electrode

Bending Strength Capacitance change : within ±12.5% Bending to the limit (1mm)

with 1.0mm/sec.

Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder

is to be soldered newly 245±5℃, 3±0.3sec.

(preheating : 80~120℃ for 10~30sec.)

Resistance to Capacitance change : within ±7.5% Solder pot : 270±5℃, 10±1sec.

Soldering heat Tan δ, IR : initial spec.

250%

Performance Test condition

Vibration Test Capacitance change : within ±5% Amplitude : 1.5mm

Tan δ, IR : initial spec. From 10㎐ to 55㎐ (return : 1min.)

2hours  3 direction (x, y, z)

Moisture Capacitance change : within ±12.5% With rated voltage

Resistance Tan δ : 0.05 max 40±2℃, 90~95%RH, 500+12/-0 hours

IR : More than 25㏁·㎌

High Temperature Capacitance change : within ±12.5% Wit

of the rated voltage

Resistance Tan δ : 0.05 max Max. operating temperature

IR : More than 50㏁·㎌

1000+48/-0 hours

Temperature Capacitance change : within ±7.5% 1 cycle condition

Cycling Tan δ, IR : initial spec. Min. operating temperature →25℃

→Max. operating temperature →25℃

5 cycles test

C. Recommended Soldering method :

Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )

* For the more detail Specification, Please refer to the Samsung MLCC catalogue.

Performance Test condition

200%