KBJ4AV – KBJ4MV
4.0A BRIDGE RECTIFIER
Data Sheet 1383, Rev. —
Features
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High case dielectric strength of 2000 VRMS
Ideal for printed circuit boards
Glass passivated chip junction
Ultra surge current capability
Mechanical Data
Case: KBJ(3S) Molded plastic body
Mounting Position: Any(3)
Mounting Torque: 5 in. – lb. Max.
Weight: 0.15oz., 4.3g
Terminals: Plated Leads Solderable per
MIL-STD-750, Method 2026
High temperature soldering guaranteed:
260°C/10 seconds,0.375(9.5mm) lead length,
5lbs.(2.3kg) tension
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol KBJ4AV KBJ4BV KBJ4DV KBJ4GV KBJ4JV KBJ4KV KBJ4MV Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR 50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @TC = 100°C
@T
A = 25°C IO 4.0(1)
2.3(2) A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method) IFSM 150 A
I
2t Rating for Fusing (t < 8.3ms) I2t 93 A2s
Forward Voltage (per diode) @IF = 2.0A VFM 1.00 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TC = 125°C IR 5.0
250 µA
Typical Thermal Resistance (per leg) (Note 1) RθJA 26(2) K/W
Typical Thermal Resistance (per leg) (Note 2) RθJC 5
(1) K/W
Dielectric strength(Terminals to case, AC 1 minute) Vdis 2000 V
Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C
SENSITRON
SEMICONDUCTOR
Case Style: KBJ (3S)
)
•!! !!"#$•
•%&'(&)*+,,---.&./0•12&%#%3&./0•
!"$%&'223064
KBJ4AV – KBJ4MV
4.0A BRIDGE RECTIFIER
Data Sheet 1383, Rev. —
Note: (1) Unit case mounted on AL plate heatsink
(2) Unit mounted on P.C.B.with 0.5x0.5”(12x12mm) copper pads and 0.375”(9.5mm) lead length without heatsink.
(3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
SENSITRON
SEMICONDUCTOR
•!! !!"#$•
•%&'(&)*+,,---.&./0•12&%#%3&./0•
• 221 West Industry Court ! Deer Park, NY 11729-4681 ! (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
1383
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest
version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
4.0A BRIDGE RECTIFIER
KBJ4AV – KBJ4MV
