PESD1CAN CAN bus ESD protection diode Rev. 04 -- 15 February 2008 Product data sheet 1. Product profile 1.1 General description PESD1CAN in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller Area Network (CAN) bus lines from the damage caused by ElectroStatic Discharge (ESD) and other transients. 1.2 Features n Due to the integrated diode structure only one small SOT23 package is needed to protect two CAN bus lines n Max. peak pulse power: PPP = 200 W at tp = 8/20 s n Low clamping voltage: VCL = 40 V at IPP = 1 A n Ultra low leakage current: IRM < 1 nA n Typ. diode capacitance matching: Cd/Cd = 0.1 % n ESD protection up to 23 kV n IEC 61000-4-2, level 4 (ESD) n IEC 61000-4-5 (surge); IPP = 3 A at tp = 8/20 s n Small SMD plastic package 1.3 Applications n CAN bus protection n Automotive applications 1.4 Quick reference data Table 1. Quick reference data Tamb = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit - - 24 V - 11 17 pF Per diode VRWM reverse standoff voltage Cd diode capacitance f = 1 MHz; VR = 0 V PESD1CAN Nexperia CAN bus ESD protection diode 2. Pinning information Table 2. Pinning Pin Description 1 cathode 1 2 cathode 2 3 common cathode Simplified outline Symbol 3 1 3 1 2 2 006aaa155 3. Ordering information Table 3. Ordering information Type number PESD1CAN Package Name Description Version - plastic surface-mounted package; 3 leads SOT23 4. Marking Table 4. Marking codes Type number Marking code[1] PESD1CAN *AN [1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit PPP peak pulse power tp = 8/20 s [1][2] - 200 W IPP peak pulse current tp = 8/20 s [1][2] - 3 A Per diode Per device Tj junction temperature - 150 C Tamb ambient temperature -65 +150 C Tstg storage temperature -65 +150 C [1] Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5. [2] Measured from pin 1 to 3 or 2 to 3. (c) PESD1CAN_4 Product data sheet Rev. 04 -- 15 February 2008 Nexperia B.V. 2017. All rights reserved 2 of 12 PESD1CAN Nexperia CAN bus ESD protection diode Table 6. ESD maximum ratings Symbol Parameter Conditions electrostatic discharge voltage IEC 61000-4-2 (contact discharge) Min Max Unit - 23 kV - 10 kV Per diode VESD [1][2] MIL-STD-883 (human body model) [1] Device stressed with ten non-repetitive ESD pulses. [2] Measured from pin 1 to 3 or 2 to 3. Table 7. ESD standards compliance Standard Conditions Per diode IEC 61000-4-2; level 4 (ESD) > 15 kV (air); > 8 kV (contact) MIL-STD-883; class 3 (human body model) > 4 kV 001aaa631 001aaa630 120 IPP 100 % 90 % 100 % IPP; 8 s IPP (%) 80 e-t 50 % IPP; 20 s 40 10 % t tr = 0.7 ns to 1 ns 0 0 10 20 30 30 ns 40 t (s) Fig 1. 8/20 s pulse waveform according to IEC 61000-4-5 60 ns Fig 2. ESD pulse waveform according to IEC 61000-4-2 (c) PESD1CAN_4 Product data sheet Rev. 04 -- 15 February 2008 Nexperia B.V. 2017. All rights reserved 3 of 12 PESD1CAN Nexperia CAN bus ESD protection diode 6. Characteristics Table 8. Characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Per diode VRWM reverse standoff voltage - - 24 V IRM reverse leakage current VRWM = 24 V - <1 50 nA VBR breakdown voltage IR = 5 mA 25.4 27.8 30.3 V Cd diode capacitance f = 1 MHz; VR = 0 V - 11 17 pF - 0.1 - % - 0.1 - % Cd/Cd diode capacitance matching [1] f = 1 MHz; VR = 0 V f = 1 MHz; VR = 2.5 V VCL rdif [2][3] clamping voltage differential resistance IPP = 1 A - - 40 V IPP = 3 A - - 70 V IR = 1 mA - - 300 [1] Cd is the difference of the capacitance measured between pin 1 and pin 3 and the capacitance measured between pin 2 and pin 3. [2] Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5. [3] Measured from pin 1 to 3 or 2 to 3. (c) PESD1CAN_4 Product data sheet Rev. 04 -- 15 February 2008 Nexperia B.V. 2017. All rights reserved 4 of 12 PESD1CAN Nexperia CAN bus ESD protection diode 006aaa257 104 001aaa193 1.2 PPP PPP (W) PPP(25C) 103 0.8 102 0.4 10 102 10 1 103 104 0 0 50 100 150 t p (s) 200 Tj (C) Tamb = 25 C Fig 3. Peak pulse power as a function of exponential pulse duration; typical values Fig 4. Relative variation of peak pulse power as a function of junction temperature; typical values 006aaa258 20 IPP Cd (pF) 16 12 -VCL -VBR -VRWM IR IRM -IRM -IR 8 4 VRWM VBR VCL - 0 0 5 10 15 20 + -IPP 25 VR (V) 006aaa676 f = 1 MHz; Tamb = 25 C Fig 5. Diode capacitance as a function of reverse voltage; typical values Fig 6. V-I characteristics for a bidirectional ESD protection diode (c) PESD1CAN_4 Product data sheet Rev. 04 -- 15 February 2008 Nexperia B.V. 2017. All rights reserved 5 of 12 PESD1CAN Nexperia CAN bus ESD protection diode ESD TESTER RZ 450 4 GHz DIGITAL OSCILLOSCOPE RG 223/U 50 coax 10x ATTENUATOR 50 CZ IEC 61000-4-2 network CZ = 150 pF; RZ = 330 D.U.T. (Device Under Test) vertical scale = 20 V/div; horizontal scale = 50 ns/div vertical scale = 200 V/div horizontal scale = 50 ns/div GND GND unclamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) vertical scale = 20 V/div; horizontal scale = 50 ns/div GND GND vertical scale = 200 V/div horizontal scale = 50 ns/div unclamped -1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped -1 kV ESD voltage waveform (IEC 61000-4-2 network) 006aaa259 Fig 7. ESD clamping test setup and waveforms (c) PESD1CAN_4 Product data sheet Rev. 04 -- 15 February 2008 Nexperia B.V. 2017. All rights reserved 6 of 12 PESD1CAN Nexperia CAN bus ESD protection diode 7. Application information The PESD1CAN is designed for the protection of two automotive CAN bus lines from the damage caused by ESD and surge pulses. The device can be used for both, high-speed CAN bus and fault-tolerant CAN bus protection. The PESD1CAN provides a surge capability of up to 200 W per line for an 8/20 s waveform. SPLIT CANH RT/2 CAN BUS TRANSCEIVER CAN bus RT/2 CANL Common mode choke (optional) 2 1 CG PESD1CAN 3 006aaa473 Fig 8. Typical application: ESD protection of two automotive CAN bus lines Circuit board layout and protection device placement: Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The following guidelines are recommended: 1. Place the PESD1CAN as close to the input terminal or connector as possible. 2. The path length between the PESD1CAN and the protected line should be minimized. 3. Keep parallel signal paths to a minimum. 4. Avoid running protection conductors in parallel with unprotected conductors. 5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground loops. 6. Minimize the length of the transient return path to ground. 7. Avoid using shared transient return paths to a common ground point. 8. Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. (c) PESD1CAN_4 Product data sheet Rev. 04 -- 15 February 2008 Nexperia B.V. 2017. All rights reserved 7 of 12 PESD1CAN Nexperia CAN bus ESD protection diode 8. Package outline 3.0 2.8 1.1 0.9 3 0.45 0.15 2.5 1.4 2.1 1.2 1 2 1.9 0.48 0.38 Dimensions in mm 0.15 0.09 04-11-04 Fig 9. Package outline SOT23 (TO-236AB) 9. Packing information Table 9. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number PESD1CAN [1] Package SOT23 Description 4 mm pitch, 8 mm tape and reel 3000 10000 -215 -235 For further information and the availability of packing methods, see Section 13. (c) PESD1CAN_4 Product data sheet Packing quantity Rev. 04 -- 15 February 2008 Nexperia B.V. 2017. All rights reserved 8 of 12 PESD1CAN Nexperia CAN bus ESD protection diode 10. Soldering 2.90 2.50 0.85 2 1 solder lands 1.30 3.00 2.70 0.85 solder resist solder paste 3 occupied area 0.60 (3x) Dimensions in mm 0.50 (3x) 0.60 (3x) 1.00 3.30 sot023 Fig 10. Reflow soldering footprint SOT23 (TO-236AB) 3.40 1.20 (2x) solder lands solder resist occupied area 2 1 4.60 4.00 1.20 3 Dimensions in mm 2.80 preferred transport direction during soldering sot023 4.50 Fig 11. Wave soldering footprint SOT23 (TO-236AB) (c) PESD1CAN_4 Product data sheet Rev. 04 -- 15 February 2008 Nexperia B.V. 2017. All rights reserved 9 of 12 PESD1CAN Nexperia CAN bus ESD protection diode 11. Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes PESD1CAN_4 20080215 Product data sheet - PESD1CAN_3 Modifications: * * Section 1.2 "Features": list item for diode capacitance matching added Table 8 "Characteristics": Cd/Cd diode capacitance matching added PESD1CAN_3 20070521 Product data sheet - PESD1CAN_2 PESD1CAN_2 20051017 Product data sheet - PESD1CAN_1 PESD1CAN_1 20050125 Objective data sheet - - (c) PESD1CAN_4 Product data sheet Rev. 04 -- 15 February 2008 Nexperia B.V. 2017. All rights reserved 10 of 12 PESD1CAN Nexperia CAN bus ESD protection diode 12. Legal information 12.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. 12.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 12.3 Disclaimers General -- Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- Nexperia products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia accepts no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Nexperia. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 12.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Contact information For additional information, please visit: http://www.nexperia.com For sales office addresses, send an email to: salesaddresses@nexperia.com (c) PESD1CAN_4 Product data sheet Rev. 04 -- 15 February 2008 Nexperia B.V. 2017. All rights reserved 11 of 12 Nexperia PESD1CAN CAN bus ESD protection diode 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 12.1 12.2 12.3 12.4 13 14 (c) Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Application information. . . . . . . . . . . . . . . . . . . 7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 Packing information. . . . . . . . . . . . . . . . . . . . . . 8 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information. . . . . . . . . . . . . . . . . . . . . 11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 15 February 2008