To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. "Standard": 8. 9. 10. 11. 12. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT PC4556 HIGH PERFORMANCE DUAL DECOMPENSATED OPERATIONAL AMPLIFIER DESCRIPTION The PC4556 is a dual operational amplifier which features further advanced A.C. performance than that of the PC4558. Decompensation characteristic guarantees 20MHz gain-bandwidth product higher than 20 dB. Also featured are low input noise and high output drive capability making this device the optimum choice for audio application. FEATURES * Gain bandwidth products: 20 MHz (Av 20 dB) * High slew rate: 5 V/s * Low input noise voltage: 6 Vp-p * Internal frequency compensation (Av 20 dB) ORDERING INFORMATION Part Number Package PC4556C 8-pin plastic DIP (7.62 mm (300)) PC4556G2 8-pin plastic SOP (5.72 mm (225)) EQUIVALENT CIRCUIT PIN CONFIGURATION (Top View) V+ R1 PC4556C, 4556G2 Q7 Q5 Q13 OUT1 Q11 Q8 II1 Q9 IN 2 R7 R5 C2 Q12 8 V + 1 - + Q15 R6 Q2 Q1 II 1 7 OUT2 2 + - IN1 Q14 3 6 II2 4 5 IN2 Q6 Q3 R2 V Q4 C1 R3 OUT Q10 R4 V R8 - D - The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. G10240EJ7V0DS00 (7th edition) Date Published March 2004 N CP(K) Printed in Japan 1987 PC4556 ABSOLUTE MAXIMUM RATINGS (TA = 25C) Parameter + Voltage between V and V - Note 1 Package Note 4 G2 Package Note 5 C - -0.3 to +36 V 30 V VID Note 3 Power Dissipation Unit + Note 2 Output Voltage Ratings V -V Differential Input Voltage Input Voltage Symbol Output Short Circuit Duration - + V - + VI V -0.3 to V +0.3 VO V -0.3 to V +0.3 V PT 700 mW 440 mW Indefinite sec Note 6 Operating Ambient Temperature TA -20 to +80 C Storage Temperature Tstg -55 to +125 C Notes 1. Reverse connection of supply voltage can cause destruction. 2. The input voltage should be allowed to input without damage or destruction. Even during the transition period of supply voltage, power on/off etc., this specification should be kept. The normal operation will establish when the both inputs are within the Common Mode Input Voltage Range of electrical characteristics. 3. This specification is the voltage which should be allowed to supply to the output terminal from external without damage or destructive. Even during the transition period of supply voltage, power on/off etc., this specification should be kept. The output voltage of normal operation will be the Output Voltage Swing of electrical characteristics. 4. Thermal derating factor is -7.0 mV/C when operating ambient temperature is higher than 25C. 5. Thermal derating factor is -4.4 mV/C when operating ambient temperature is higher than 25C. 6. Pay careful attention to the total power dissipation not to exceed the absolute maximum ratings, Note 4 and Note 5. RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage 2 Symbol V MIN. 4 Data Sheet G10240EJ7V0DS TYP. MAX. Unit 16 V PC4556 ELECTRICAL CHARACTERISTICS (TA = 25C, V = 15 V) Parameter Input Offset Voltage Input Offset Current Input Bias Current Symbol TYP. MAX. Unit 0.5 6 mV IIO 5 200 nA IB 180 500 nA 170 mW VIO Note 7 Note 7 Conditions MIN. RS 10 k Large Signal Voltage Gain AV RL 2 k , VO = 10 V Power Consumption Pd IO = 0 A Common Mode Rejection Ratio CMR RS 10 k Supply Voltage Rejection Ratio SVR RS 10 k Output Voltage Swing Vom RL 2 k 12 14 V IO = 25 mA 10 11.5 V 12 14 V 20000 100000 90 70 90 30 dB 150 V/V Common Mode Input Voltage Range VICM Slew Rate SR AV 10 (20 dB) 5 V/s Input Equivalent Noise Voltage Vn RS = 1 k, f = 1 Hz to 1 kHz 6 Vp-p 105 dB Channel Separation f = 1 kHz Notes 7. Input bias currents flow out from IC. Because each currents are base current of PNP-transistor on input stage. Data Sheet G10240EJ7V0DS 3 PC4556 TYPICAL APPLICATION CIRCUIT Noninverting Amplifier R3 - VIN VO + R1 R3 9 R2 R1 = R2 R2 Inverting Amplifier R2 VIN R1 - 4 VO + R4 C R4, C are necessary when R2 < 10R1 R3 Data Sheet G10240EJ7V0DS R4 1 R2 9 C R2/R4 2 R4 5 MHz PC4556 TYPICAL PERFORMANCE CHARACTERISTICS (TA = 25C, TYP.) POWER DISSIPATION OPEN LOOP FREQUENCY RESPONSE 800 AV - Open Loop Voltage Gain - dB PT - Total Power Dissipation - mW 120 PC4556C 143C/W 600 PC4556G2 400 227C/W 200 0 20 40 60 80 V = 15 V 100 80 60 40 20 0 100 1 10 100 TA - Operating Ambient Temperature - C INPUT BIAS CURRENT V = 15 V The characteristic of the optional sample. (Quantity:five) 2 V = 15 V IB - Input Bias Current - nA VIO - Input Offset Voltage - mV 10 M 1 0 -1 -2 200 160 120 80 40 -3 -20 0 20 40 60 0 -20 80 TA - Operating Ambient Temperature - C 0 20 40 80 OUTPUT CURRENT LIMIT 20 V = 15 V V = 15 V 32 60 TA - Operating Ambient Temperature - C LARGE SIGNAL FREQUENCY RESPONSE 28 VO - Output Voltage - V 24 20 16 12 Vom - Output Voltage Swing - Vp-p 10 k 100 k 1 M f - Frequency - Hz INPUT OFFSET VOLTAGE 3 1k 8 15 VO- IO SINK 10 VO+ IO SOURCE 5 4 0 100 1k 10 k 100 k 1M 0 20 40 60 80 IO - Output Current - mA f - Frequency - Hz Data Sheet G10240EJ7V0DS 5 PC4556 SUPPLY CURRENT 4 ICC - Supply Current - mA VICM - Common Mode Input Voltage Range - V OUTPUT VOLTAGE SWING 20 10 0 -10 -20 10 0 20 3 2 1 10 0 20 V - Supply Voltage - V V - Supply Voltage - V INPUT EQUIVALENT NOISE VOLTAGE DENSITY VOLTAGE FOLLOWER PULSE RESPONSE 10 1000 300 VO - Output Voltage - V en - Input Equivalent Noise Voltage Density - nV/ Hz V = 15 V 100 30 5 0 -5 10 1 10 100 1k -10 10 20 t - Time - s f - Frequency - Hz 6 0 Data Sheet G10240EJ7V0DS 30 40 PC4556 PACKAGE DRAWINGS (Unit : mm) 8-PIN PLASTIC DIP (7.62mm(300)) 8 5 1 4 A K J L P I C H G B M R F D N M NOTES 1. Each lead centerline is located within 0.25 mm of its true position (T.P.) at maximum material condition. 2. ltem "K" to center of leads when formed parallel. ITEM MILLIMETERS A B 10.16 MAX. 1.27 MAX. C 2.54 (T.P.) D 0.500.10 F 1.4 MIN. G 3.20.3 H 0.51 MIN. I J 4.31 MAX. 5.08 MAX. K 7.62 (T.P.) L 6.4 M 0.25 +0.10 -0.05 N 0.25 P 0.9 MIN. R 015 P8C-100-300B,C-2 Data Sheet G10240EJ7V0DS 7 PC4556 8-PIN PLASTIC SOP (5.72 mm (225)) 8 5 detail of lead end P 4 1 A H F I G J S B C D M L N K S M E NOTE Each lead centerline is located within 0.12 mm of its true position (T.P.) at maximum material condition. ITEM MILLIMETERS A 5.2 +0.17 -0.20 B 0.78 MAX. C 1.27 (T.P.) D 0.42 +0.08 -0.07 E 0.10.1 F 1.590.21 G 1.49 H 6.50.3 I 4.40.15 J 1.10.2 K 0.17 +0.08 -0.07 L 0.60.2 M 0.12 N 0.10 P 3 +7 -3 S8GM-50-225B-6 8 Data Sheet G10240EJ7V0DS PC4556 RECOMMENDED SOLDERING CONDITIONS The PC4556 should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales representative. For technical information, see the following website. Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html) Type of Surface Mount Device PC4556G2: 8-pin plastic SOP (5.72 mm (225)) Process Infrared Ray Reflow Conditions Symbol Peak temperature: 235C or below (Package surface temperature), IR35-00-3 Reflow time: 30 seconds or less (at 210C or higher), Maximum number of reflow processes: 3 time. Vapor Phase Soldering Peak temperature: 215C or below (Package surface temperature), VP15-00-3 Reflow time: 40 seconds or less (at 200C or higher), Maximum number of reflow processes: 3 time. Wave Soldering Solder temperature: 260C or below, Flow time: 10 seconds or less, WS60-00-1 Maximum number of flow processes: 1 time, Pre-heating temperature: 120C or below (Package surface temperature). Partial Heating Method Pin temperature: 300C or below, - Heat time: 3 seconds or less (Per each side of the device). Caution Apply only one kind of soldering condition to a device, except for "partial heating method", or the device will be damaged by heat stress. Type of Through-hole Device PC4556C: 8-pin plastic DIP (7.62 mm (300)) Process Conditions Wave Soldering Solder temperature: 260C or below, (only to leads) Flow time: 10 seconds or less. Partial Heating Method Pin temperature: 300C or below, Heat time: 3 seconds or less (per each lead). Caution For through-hole device, the wave soldering process must be applied only to leads, and make sure that the package body does not get jet soldered. Data Sheet G10240EJ7V0DS 9 PC4556 * The information in this document is current as of March, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1