MBRD10100CT Schottky Barrier Rectifier Reverse Voltage 100 V Forward Current 10 A Features Plastic package has underwriters Laboratory Flammability Classification 94V-0 Dual rectifier construction, positive center tap Low forward voltage, high efficiency Guarding for over voltage protection Package: TO-252 (DPAK) Mechanical Data Case: epoxy, molded Weight: 0.4grams (approximately) Lead temperature for soldering purpose: 260C max. for 10 sec 2500 pcs per reel Schematic Diagram Maximum Ratings & Electrical Characteristics (TA=25C unless otherwise noted) Test Parameter Symbol Value Unit Conditions Maximum Repetitive Peak Reverse Voltage VRRM 100 V Working Peak Reverse Voltage VRWM 100 V Maximum DC Blocking Voltage VDC 100 V Maximum Average Forward Rectified Current Total Device IF(AV) Per Diode @ Tc=105C Peak Forward Surge Current 8.3ms Single Half Sine-wave 10 5 A IFSM 120 A Peak repetitive Reverse Current Per Leg at tp=2.0s ,1KHz IRRM 1.0 A Voltage Rate of Change (rated VR) DV/dt 10000 V/s TJ - 55 to+150 C TSTG - 55 to+150 C Superimposed on Rated Load per Diode Operating Junction Temperature Range Storage Temperature Range Maximum Instantaneous Forward Voltage per Leg IF=5A TC=25C IF=5A TC=125C Maximum Reverse Current per Leg at Working TJ=25C Peak Reverse Voltage TJ=100C VF IR 0.85 0.75 V 200 A 15 mA Thermal Characteristics (TA=25C unless otherwise noted) Symbol Parameter Typ.(TO-252) RJC Thermal Resistance, Junction to Case per Leg 3.5 C/W RJA Thermal Resistance, Junction to Ambient per Leg 62.5 C/W Note: Pulse test:300us pulse width, duty cycle=2% 1/3 Unit MBRD10100CT Schottky Barrier Rectifier Reverse Voltage 100 V Forward Current 10 A Ratings and Characteristics Curves (TA = 25C unless otherwise noted) 2/3 MBRD10100CT Schottky Barrier Rectifier Reverse Voltage 100 V Forward Current 10 A Package Outline Dimensions in millimeters www.goodarksemi.com TO-252 3/3 Doc.USMBRD10100CTxSD2.1