1. Product profile
1.1 General description
NPN resistor-equipped transistors.
[1] Also available in SOT54A and SOT54 variant packages (see Section 2).
1.2 Features
1.3 Applications
1.4 Quick reference data
PDTC115T series
NPN resistor-equipped transistors; R1 = 100 kΩ, R2 = open
Rev. 04 — 17 February 2005 Product data sheet
Table 1: Product overview
Type number Package PNP complement
Philips JEITA
PDTC115TE SOT416 SC-75 PDTA115TE
PDTC115TK SOT346 SC-59A PDTA115TK
PDTC115TM SOT883 SC-101 PDTA115TM
PDTC115TS[1] SOT54 (TO-92) SC-43A PDTA115TS
PDTC115TT SOT23 - PDTA115TT
PDTC115TU SOT323 SC-70 PDTA115TU
■Built-in bias resistor ■Reduces component count
■Simplifies circuit design ■Reduces pick and place costs
■General-purpose switching and
amplification ■Circuit drivers
■Inverter and interface circuits
Table 2: Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
VCEO collector-emitter voltage open base - - 50 V
IOoutput current (DC) - - 100 mA
R1 bias resistor 1 (input) 70 100 130 kΩ
9397 750 14021 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 17 February 2005 2 of 10
Philips Semiconductors PDTC115T series
NPN resistor-equipped transistors; R1 = 100 kΩ, R2 = open
2. Pinning information
Table 3: Pinning
Pin Description Simplified outline Symbol
SOT54
1 input (base)
2 output (collector)
3 GND (emitter)
SOT54A
1 input (base)
2 output (collector)
3 GND (emitter)
SOT54 variant
1 input (base)
2 output (collector)
3 GND (emitter)
SOT23, SOT323, SOT346, SOT416
1 input (base)
2 GND (emitter)
3 output (collector)
SOT883
1 input (base)
2 GND (emitter)
3 output (collector)
001aab347
1
2
3
006aaa218
2
3
1R1
001aab348
1
2
3
006aaa218
2
3
1R1
001aab447
1
2
3
006aaa218
2
3
1R1
006aaa144
12
3
sym012
3
2
1R1
3
1
2
Transparent
top view
sym012
3
2
1R1
9397 750 14021 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 17 February 2005 3 of 10
Philips Semiconductors PDTC115T series
NPN resistor-equipped transistors; R1 = 100 kΩ, R2 = open
3. Ordering information
[1] Also available in SOT54A and SOT54 variant packages (see Section 2 and Section 9).
4. Marking
[1] * = -: made in Hong Kong
* = p: made in Hong Kong
* = t: made in Malaysia
* = W: made in China
Table 4: Ordering information
Type number Package
Name Description Version
PDTC115TE SC-75 plastic surface mounted package; 3 leads SOT416
PDTC115TK SC-59A plastic surface mounted package; 3 leads SOT346
PDTC115TM SC-101 leadless ultra small plastic package; 3 solder lands;
body 1.0 × 0.6 × 0.5 mm SOT883
PDTC115TS[1] SC-43A plastic single-ended leaded (through hole) package;
3 leads SOT54
PDTC115TT - plastic surface mounted package; 3 leads SOT23
PDTC115TU SC-70 plastic surface mounted package; 3 leads SOT323
Table 5: Marking codes
Type number Marking code[1]
PDTC115TE 17
PDTC115TK 28
PDTC115TM G5
PDTC115TS TC115T
PDTC115TT *AK
PDTC115TU *17
9397 750 14021 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 17 February 2005 4 of 10
Philips Semiconductors PDTC115T series
NPN resistor-equipped transistors; R1 = 100 kΩ, R2 = open
5. Limiting values
[1] Refer to standard mounting conditions.
[2] Reflow soldering is the only recommended soldering method.
[3] Refer to SOT883 standard mounting conditions; FR4 printed-circuit board with 60 µm copper strip line.
6. Thermal characteristics
[1] Refer to standard mounting conditions.
[2] Reflow soldering is the only recommended soldering method.
[3] Refer to SOT883 standard mounting conditions; FR4 printed-circuit board with 60 µm copper strip line.
Table 6: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VCBO collector-base voltage open emitter - 50 V
VCEO collector-emitter voltage open base - 50 V
VEBO emitter-base voltage open collector - 5 V
IOoutput current (DC) - 100 mA
ICM peak collector current - 100 mA
Ptot total power dissipation
SOT416 Tamb ≤25 °C[1] - 150 mW
SOT346 Tamb ≤25 °C[1] - 250 mW
SOT883 Tamb ≤25 °C[2] [3] - 250 mW
SOT54 Tamb ≤25 °C[1] - 500 mW
SOT23 Tamb ≤25 °C[1] - 250 mW
SOT323 Tamb ≤25 °C[1] - 200 mW
Tstg storage temperature −65 +150 °C
Tjjunction temperature - 150 °C
Tamb ambient temperature −65 +150 °C
Table 7: Thermal characteristics
Symbol Parameter Conditions Min Typ Max Unit
Rth(j-a) thermal resistance from
junction to ambient in free air
SOT416 [1] - - 833 K/W
SOT346 [1] - - 500 K/W
SOT883 [2] [3] - - 500 K/W
SOT54 [1] - - 250 K/W
SOT23 [1] - - 500 K/W
SOT323 [1] - - 625 K/W
9397 750 14021 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 17 February 2005 5 of 10
Philips Semiconductors PDTC115T series
NPN resistor-equipped transistors; R1 = 100 kΩ, R2 = open
7. Characteristics
Table 8: Characteristics
T
amb
=25
°
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
ICBO collector-base cut-off
current VCB =50V; I
E= 0 A - - 100 nA
ICEO collector-emitter
cut-off current VCE =30V; I
B=0A --1µA
VCE =30V; I
B=0A;
Tj= 150 °C--50µA
IEBO emitter-base cut-off
current VEB =5V; I
C= 0 A - - 100 nA
hFE DC current gain VCE =5V; I
C= 1 mA 100 - -
VCEsat collector-emitter
saturation voltage IC= 5 mA; IB= 0.25 mA - - 150 mV
R1 bias resistor 1 (input) 70 100 130 kΩ
Cccollector capacitance IE=i
e = 0 A; VCB =10V;
f=1MHz - - 2.5 pF
VCE = 5 V
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
IC/IB = 20
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
Fig 1. DC current gain as a function of collector
current; typical values Fig 2. Collector-emitter saturation voltage as a
function of collector current; typical values
006aaa058
IC (mA)
10−1102
101
103
hFE
102
(1)
(2)
(3)
006aaa059
IC (mA)
10−1102
101
10−1
1
VCEsat
(V)
10−2
(1)
(3)
(2)
Philips Semiconductors PDTC115T series
NPN resistor-equipped transistors; R1 = 100 kΩ, R2 = open
9397 750 14021 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 17 February 2005 6 of 10
8. Package outline
Fig 3. Package outline SOT416 (SC-75) Fig 4. Package outline SOT346 (SC-59A/TO-236)
Fig 5. Package outline SOT883 (SC-101) Fig 6. Package outline SOT54 (SC-43A/TO-92)
Fig 7. Package outline SOT54A Fig 8. Package outline SOT54 variant
04-11-04Dimensions in mm
0.95
0.60
1.8
1.4
1.75
1.45 0.9
0.7
0.25
0.10
1
0.30
0.15
12
30.45
0.15
04-11-11Dimensions in mm
3.0
2.5 1.7
1.3
0.26
0.10
12
3
1.9
0.50
0.35
1.3
1.0
3.1
2.7
0.6
0.2
03-04-03Dimensions in mm
0.62
0.55
0.55
0.47 0.50
0.46
0.65
0.20
0.12
3
21
0.30
0.22
0.30
0.22
1.02
0.95
0.35
04-11-16Dimensions in mm
5.2
5.0 14.5
12.7
4.8
4.4
4.2
3.6 0.45
0.38
0.48
0.40
1.27 2.54
3
2
1
04-06-28Dimensions in mm
5.2
5.0 14.5
12.7
4.8
4.4
4.2
3.6 0.45
0.38
0.48
0.40
2.54
5.08
3 max
3
2
1
05-01-10Dimensions in mm
5.2
5.0 14.5
12.7
4.8
4.4
4.2
3.6
0.45
0.38
0.48
0.40
1.27
1.27
2.54
2.5
max
3
2
1
9397 750 14021 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 17 February 2005 7 of 10
Philips Semiconductors PDTC115T series
NPN resistor-equipped transistors; R1 = 100 kΩ, R2 = open
9. Packing information
[1] For further information and the availability of packing methods, see Section 14.
Fig 9. Package outline SOT23 (TO-236AB) Fig 10. Package outline SOT323 (SC-70)
04-11-04Dimensions in mm
0.45
0.15
1.9
1.1
0.9
3.0
2.8
2.5
2.1 1.4
1.2
0.48
0.38 0.15
0.09
12
3
04-11-04Dimensions in mm
0.45
0.15
1.1
0.8
2.2
1.8
2.2
2.0 1.35
1.15
1.3
0.4
0.3 0.25
0.10
12
3
Table 9: Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.
[1]
Type number Package Description Packing quantity
3000 5000 10000
PDTC115TE SOT416 4 mm pitch, 8 mm tape and reel -115 - -135
PDTC115TK SOT346 4 mm pitch, 8 mm tape and reel -115 - -135
PDTC115TM SOT883 2 mm pitch, 8 mm tape and reel - - -315
PDTC115TS SOT54 bulk, straight leads - -412 -
PDTC115TS SOT54A tape and reel, wide pitch - - -116
PDTC115TS SOT54A tape ammopack, wide pitch - - -126
PDTC115TS SOT54 variant bulk, delta pinning - -112 -
PDTC115TT SOT23 4 mm pitch, 8 mm tape and reel -215 - -235
PDTC115TU SOT323 4 mm pitch, 8 mm tape and reel -115 - -135
9397 750 14021 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 17 February 2005 8 of 10
Philips Semiconductors PDTC115T series
NPN resistor-equipped transistors; R1 = 100 kΩ, R2 = open
10. Revision history
Table 10: Revision history
Document ID Release date Data sheet status Change notice Doc. number Supersedes
PDTC115T_SER_4 20050217 Product data sheet - 9397 750 14021 PDTC115TT_3
Modifications •The types PDTC115TE, PDTC115TK, PDTC115TM, PDTC115TS and PDTC115TU were
added.
•Table 1 “Product overview” added
•Figure 1 and 2 added
•Section 9 “Packing information” added
PDTC115TT_3 20040727 Product data sheet - 9397 750 13505 PDTC115TT_2
PDTC115TT_2 20040510 Objective data sheet - 9397 750 13206 PDTC115TT_1
PDTC115TT_1 20040305 Objective data sheet - 9397 750 12554 -
Philips Semiconductors PDTC115T series
NPN resistor-equipped transistors; R1 = 100 kΩ, R2 = open
9397 750 14021 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 17 February 2005 9 of 10
11. Data sheet status
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
12. Definitions
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
13. Disclaimers
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
14. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
Level Data sheet status[1] Product status[2] [3] Definition
I Objective data Development This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II Preliminary data Qualification This data sheet contains data from the preliminary specification.Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
© Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights.
Date of release: 17 February 2005
Document number: 9397 750 14021
Published in The Netherlands
Philips Semiconductors PDTC115T series
NPN resistor-equipped transistors; R1 = 100 kΩ, R2 = open
15. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 3
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4
7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6
9 Packing information. . . . . . . . . . . . . . . . . . . . . . 7
10 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8
11 Data sheet status. . . . . . . . . . . . . . . . . . . . . . . . 9
12 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
14 Contact information . . . . . . . . . . . . . . . . . . . . . 9
