62IN Series Miniature
Circular Bayonet-Coupled
Connectors AC6201 0313
1
Introduction
I ntroduction & Page Contents
Page
Back-Shell
Specials and deviations
Introduction
General description
Insert orientations
Key / Keyway orientations
Insert arrangements
Connector styles
Dust covers
Accessories
Ordering 62IN series connectors
16-18
19
1
2
3
4
5
6-11
12
13-15
20
Amphenol 62IN series connectors are general purpose,
environment resistant , miniature circular connectors with three-
point bayonet coupling and five-key polarisation. Designed to meet
the requirements of MIL-C-26482, Series I solder type, these
connectors are widely used in applications calling for quick
disconnect connectors.
62IN connectors are intermateable and interchangeable with all MIl-
C-26482 connectors, whether solder or crimp type.
These connectors are used worldwide in military and industrial
applications and are available in a variety of sizes, styles and
configurations.
Amphenol 62IN series connectors are also approved to Indian
Defence Standard Joint Services Specifications JSS50813, certified
by the Electronic Components Standardisation Organisation
(LCSO), Bangalore, India.
Content
Shell
Insert and grommet
Contacts
Specifications
Number of contacts 2 thru 61 in discrete steps
Operating temperature -55 C to +125 C
Current rating
Contact size Rated current Test current Potential drop
20 7.5A 7.5A
16 13A 13A
Voltage rating (max. operating voltage at sea level)
Service rating AC (rms)
I 600V
II 1000V
Insulation resistance 5000 Mohm
Voltage proof
Service rating Test voltage (rms)
I 1500V
II 2300V
Wire range accomodations
Contact size AWG wire size
20 24, 22 and 20
16 20, 18 and 16
55mV
50mV
General Description
2
Amphenol 62IN series miniature circular bayonet-coupled solder connectors meet the most critical
application needs. Design versatility and high reliability performance makes this series ideal for
environmental sealing.
Shell hardware is manufactured from aluminum alloy and cadmium plated with an olive drab chromate
finish. This finish has excellent conductivity; it is non-reflectiing and corrosion resistant. Black anodised
finish and cadmium-free zinc cobalt plating are also available. For details, contact factory.
Shell styles consist of wall and box mounting receptacles, jam nut receptacles, cable mounting
receptacles and straight plugs. Connectors are available in 9 shell sizes : 8, 10, 12, 14, 1, 18, 20, 22
and 24.
Positive shell-to-shell keying is provided with keys and keyways in a choice of either normal (N) or any
of the preferred alternate positions: W,X,Y and Z. this prevents mismating between shells of different
orientations and overcomes the difficulties associated with rotated inserts and standard key/keyway
orientation. in the latter system, damage to inserts or contacts can result if excessive force is used to
engage non-mating halves.
The insert and grommet are moulded from resilient neoprene, offering high dielectric strength and
resistance to oils, gasoline and low temperature. This provides electrical isolation of the contacts in the
insert and excellent moisture sealing.
Gold over nickel plated and socket contacts are machined from brass and designed for solder
connections. Industrial version crimp contacts are also available on request.
Orientation
Angles in degrees
X Y ZW
Insert
arrangement
Special insert arrangements consult factory
*
Normal position of
insert with pin
contacts
Alternate position of insert
with socket contacts
( counterclockwise)
Alternate position of insert
with pin contacts
( clockwise)
Each diagram shows mating face of insert
C
A
B
A
B
C
B
CA
3
122 - -588-2 210 - -608-3 - - -458-4 - - -908-33
- - --10-2
- - --10-7 - - --10-8 - 180 --12-3
112 203 2929012-8 155 270 2956012-10 - - --12-12
165 315 -3014-19 152 180 3315416-8 270 - -15816-23 - 275 3386016-26
138 222 2658518-32 318 333 34723820-16 144 216 2887220-27
126 225 -4520-39
135 264 -3922-41
- - -9010-5
*
- - --14-02
*92 184 2734014-04
*
90 - -4314-08
*
110 155 2341714-14
*
119 241 3406218-02
*
135 175 3491622-36
*
142 226 3143022-44
*
180 270 3249024-61 225 225 -90
24-31
- - --8-98
- - -9010-6
- - -3812-4
- - --12-14
92 184 2734014-05
90 - -4314-12
110 155 2341714-15 90 180 2701514-18
119 241 3406218-11
126 225 -4520-41 135 175 3491622-21
142 226 3143022-55
144 252 3336320-29
Insert Orientations
Angles shown are with reference to the major key
or keyway. In receptacles, the major keyway
always remains fixed in relation to the mounting
flange. For B, C, E and F orientations, the three
bayonet locations and associated minor keyways
are rotated completely as shown in the tables. The
accompanying diagram shows a receptacle shell
with keyways. Corresponding key orientations for
a mating plug shell are therefore always clockwise.
A
B
C
4
Shell Angles in degrees
8 105 - - 118 82 35 - - 30 50 75 - -
10 105 85 125 115 85 35 35 35 30 50 75 75 75
12 105 89 121 115 85 35 35 35 30 50 75 75 75
14 105 91 119 75 120 35 35 35 30 50 75 75 75
16 105 93 117 75 120 35 35 35 30 50 75 75 75
18 105 95 115 75 120 35 35 35 30 50 75 75 75
20 105 95 115 75 120 35 35 35 30 50 75 75 75
22 105 97 113 75 120 35 35 35 30 50 75 75 75
24 105 97 113 75 120 35 35 35 30 50 75 75 75
100 75
100 75
100 75
100 75
100 75
100 75
100 75
75 75
100 75
50
50
50
50
50
50
50
50
50
-
50
50
50
50
50
50
50
50
-
50
50
50
50
50
50
50
50
30
30
30
30
30
30
30
30
30
45
45
45
35
35
35
35
35
35
size
N B C
F
ECB
N
FE
C
BN
F
EC
B
NFE
Shell
size Angle in degrees
N B C E F
10 60 40 80 70 50
12 60 44 76 70 50
14 60 46 74 30 75
16 60 48 72 30 75
18 60 50 70 30 75
20 60 50 70 30 75
22 60 52 68 30 75
24 60 54 68 30 75
860 73 47
- -
Key / Keyway Orientations
Front face of pin insert or rear of socket insert
illustrated
20-27
I
27
20
20-41
I
41
20
22-21
II
21
16
22-55
I
55
20
24-31
I
31
16
24-61
I
61
20
Insert arrangement
Service rating
Number of contacts
Contact size
Insert arrangement
Service rating
Number of contacts
Contact size
Insert arrangement
Insert arrangement
Service rating
Service rating
Number of contacts
Number of contacts
Contact size
Contact size
Contact Legend
Symbol
Contact size 16 20
10-2
II
2
16
A
B
10-6
I
6
20
AB
C
D
E
F
10-7
I
7
20
AB
C
D
E
FG
10-8
I
8
20
AB
C
D
E
F
GH
8-3
I
3
20
CA
B
8-2
I
2
20
BA
12-10
I
10
20
AB
C
D
E
F
GJ
K
H
12-12
I
12
20
A
B
C
D
E
F
N
J
K
H
M
L
14-5
II
5
16
ABE
CD
14-12
I
4 8
16 20
AH
G B
J
M K
F L C
E D
14-19
I
19
20
A
M B
NP
LC
G
U V R
KTSD
J E
H F
16-23
I
1 22
16 20
PA
NRB
MY S
L X Z T C
KWUD
V
J E
H F
G
18-11
II
11
16
A
J
HB
K
GLC
FED
20-16
II
16
16
AB
C
D
E
F
G
H
J
KL
M
N
S
RP
RB
C
D
E
F
G
H
J
K
L
M
N
PS
T
U
V
W
X
Y
Z
a
bcd
AABCDE
F
G
H
J
K
L
M
N
P
R
S
TUVWXYZ
d
a
b
c
e
f
g
h
ijk
m
n
p
q
r
st
AB
C
D
E
F
G
H
J
K
L
MN
PR
S
T
U
V
W
X
A
E
C
D
F
G
H
J
K
L
M
N
P
R
STUVWXY
Z
a
b
c
d
e
f
g
h
i
j
kmnpqr
s
t
u
v
w
x
y
zAA BB CC
DD
EE
FF
GG
AB
C
D
E
F
G
H
J
K
LMNPQ
R
S
T
U
V
W
X
Yab
c
d
eg
f
A
H
J
K
L
M
N
P
R
S
T
U
V
WXBC
D
E
F
G
YZa b cde
f
g
h
i
j
k
m
n
p
q
r
stuv
wx
y
z
AA
BB
CC
DD
EE
FF
GG HH
JJ
KK
LL
MM
NN PP
12-3
II
3
16
B
A
C
16-8
II
8
16
A
G B
H
F
ED
C
16-26
I
26
20
A
RSTB
NUC
M Z VD
LY W E
X
KF
JG
H
ab
cc
P
HH
5
8-4
I
4
20
B
A
C
D
12-14
I
14
20
ABC
DEF
N
JK
H
LM
R
P
18-32
I
32
20
A
RBC
D
E
F
G
H
J
K
L
M
N
P
STUV
W
X
Y
Z
d
e
g
b
c
h
a
f
j
14-15
I
1 14
16 20
A
L
KM
N
J
P
C
H
F
D
GE
B
R
8-33
I
3
20
B
C
A
8-98
I
3
20
B
C
A
12-8
I
8
20
A
B
C
D
E
F
G
H
12-4
II
4
16
A
B
C
D
12-4
14-14
I
14
20
A
L
K
MN
JC
H
F
D
GE
B
R
14-14
14-18
I
18
20
A
MB
N
P
L
C
G
U
R
K
T
SD
J
E
H
F
++
-
Z
Insert Arrangements
Wall Mounting Receptacles
Dia F G
Dia L Y
Dia X
threads in inches
Shell
size
1.58 20.75 15.09 3.05 11.30 11.02 24.84 12.02 7/16-28 UNEF
1.58 23.93 18.26 3.05 11.30 14.17 24.84 14.99 9/16-24 NEF
1.58 26.32 20.63 3.05 11.30 17.35 24.84 19.05 11/16-24 NEF
1.58 28.70 23.10 3.05 11.30 20.52 24.84 22.23 13/16-20 UNEF
1.58 31.07 24.61 3.05 11.30 23.70 24.84 25.40 15/16-20 UNEF
1.58 33.45 26.58 3.05 11.30 26.85 24.84 28.58 1 1/16-18 NEF
2.03 36.63 29.36 3.05 14.10 30.02 26.62 31.75 1 3/16-18 NEF
2.03 39.80 31.75 3.05 14.10 30.02 26.62 34.93 1 5/16-18 NEF
8
10
12
14
16
18
20
22
24 2.03 42.98 34.93 3.74 14.99 36.37 26.62 38.10 1 7/16-18 NEF
Without termination assemblies All dimensions in mm
With termination assemblies All dimensions in mm
Note: Serrations / antirotation feature is not provided on shells for 10A, 10E and 10F styles.
C
DE
L
F
G
Y
B
B C D E
6
Shell
size
Style 10A Style 10E Style 10F Style 10J
G
Dia LM
thread
in inches
G
Dia L G
Dia H
Dia L G
Dia LFor cable size
Z Dia
min max
8 14.25 41.25 1/2-28 UNEF 14.25 32.54 21.03 3.96 44.76 14.25 46.89 4.28 5.84
10 17.43 41.25 5/8-24 NEF 17.43 32.54 22.63 4.78 44.76 17.43 46.89 5.21 7.93
12 20.60 41.25 3/4-20 UNEF 20.60 32.54 25.81 7.93 44.76 20.80 49.45 8.59 11.23
14 23.78 41.25 7/8-20 UNEF 23.78 32.54 28.98 9.58 44.10 23.78 54.54 10.57 13.69
16 26.98 41.25 1-20 UNEF 26.98 32.54 30.56 12.70 47.65 26.98 59.61 13.97 15.65
18 30.12 41.25 1 3/16-18 NEF 30.12 32.54 36.22 15.87 47.65 30.12 64.70 15.24 17.07
20 33.30 42.85 1 3/16-18 NEF 33.30 35.13 36.22 15.87 53.80 33.30 71.91 16.13 18.98
22 36.47 42.85 1 7/16-18 NEF 36.47 35.13 39.80 19.05 53.80 36.47 76.99 17.02 21.49
24 39.65 43.94 1 7/16-18 NEF 39.65 35.13 44.07 30.32 57.15 39.65 78.08 18.80 22.71
Connector Styles
Style 10A Style 10E Style 10F Style 10J
L
G
L
G
G
H
L
Z
G
L
10PHM/EGM
C
DE
B C D E
Dia
F G
Dia
Y
Dia
Style 12E Style 12E(219)
A L AHJKL
min max min max
Shell
size
15.09 3.05 11.30 11.02 12.02 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
18.26 3.05 11.30 14.17 14.99 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
20.63 3.05 11.30 17.35 19.05 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
23.10 3.05 11.30 20.52 22.23 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
24.61 3.05 11.30 23.70 25.40 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
26.58 3.05 11.30 26.85 28.58 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
29.36 3.05 14.10 30.02 31.75 22.23 26.62 22.23 3.89 4.70 1.93 0.70 0.76 26.85
31.75 3.05 14.10 30.02 34.93 22.23 26.62 22.23 3.89 4.70 1.93 0.70 0.76 26.85
20.75
23.93
26.32
28.70
31.07
33.45
36.63
39.80
1.58
1.58
1.58
1.58
1.58
1.58
2.03
2.03
8
10
12
14
16
18
20
22
24 2.03 42.98 34.93 3.74 14.99 36.37 38.10 22.23 26.62 22.23 3.89 4.70 1.93 0.70 0.76 26.85
Box Mounting Receptacles
Mounting data
Panel cutouts
Wall mounting receptacles
All dimensions in mm
All dimensions in mm
Style 12E
solder Style 12E(219)
film wire terminations
Style 12E(220)
film wire terminations
All dimensions in mm
Note: Style 220 is also available for 57A type receptacles with similar termination dimensions as 12E(220) style shown above.
G
F
L
Y
B
A
G
K
Y
LF
JB
AH
L
G
K
J
Y
B
A
F
H
D E
R
S
7
Shell
size AHJKL
min max min max
8
10 20.32 7.95 8.00 4.60 0.70 0.76 28.32
12 20.32 7.95 8.00 4.60 0.70 0.76 28.32
14 20.32 7.95 8.00 4.60 0.70 0.76 28.32
16 20.32 7.95 8.00 4.60 0.70 0.76 28.32
18 20.32 7.95 8.00 4.60 0.70 0.76 28.32
20 22.23 7.95 8.00 4.60 0.70 0.76 30.23
22 22.23 7.95 8.00 4.60 0.70 0.76 30.23
24 22.23 7.95 8.00 4.60 0.70 0.76 30.23
20.32 7.95 8.00 4.60 0.70 0.76 28.32
Shell
size D E
Dia R
Dia S
8 15.09 3.05 14.42 31.73
10 18.29 3.05 17.53 34.52
12 20.75 3.05 21.84 38.89
14 23.11 3.05 25.15 42.06
16 24.64 3.05 28.19 45.24
18 26.92 3.05 31.49 48.03
20 29.46 3.05 35.54 51.59
22 31.75 3.05 37.85 52.76
24 35.05 3.05 41.15 57.84
Connector Styles
Jam Nut Receptacles
Without termination assemblies
With termination assemblies All dimensions in mm
All dimensions in mm
24
Shell
size
8
10
12
14
16
18
20
22
16.89
13.72
21.03
24.18
27.33
30.50
33.68
36.86
40.03
14.53
17.70
22.48
25.65
28.83
32.00
35.18
38.35
41.45
31.75
34.52
38.89
42.06
45.24
48.03
51.59
54.76
57.84
N R S
Dia.
L
40.87
34.14
34.14
40.03
40.03
34.14
34.14
34.14
34.14
Shell
size G
Dia.
24
8
10
12
14
16
18
20
22
43.51
18.11
21.29
24.46
27.63
30.81
33.98
37.16
40.33
BCD
F
H
J
K
L L
M
Y X
Min. Max. Panel
Thickness
Style
57A Style
57A
(219) Dia. Dia. Thread
in
inches
Shell
size Min. Max. Min. Max.
8
10
12
14
16
18
20
22
24
2.97
2.97
2.97
2.97
2.97
2.97
3.76
3.76
3.76 52.50
23.93
27.10
31.88
35.05
38.23
41.40
46.15
49.33
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.76
0.76
0.76
0.70
0.76
0.76
0.76
0.76
0.76
0.76 17.93
17.93
17.93
17.93
17.93
17.932
22.71
22.71
23.55
3.38
3.38
3.38
3.38
3.38
3.38
3.38
3.38
3.38
4.40
4.40
4.40
4.40
4.40
4.40
4.40
4.40
4.40
19.05
22.23
26.98
30.15
33.32
36.50
38.68
42.85
46.05 1.58
1.58
1.58
1.58
1.58
1.58
1.58
1.58
1.58 3.18
3.18
3.18
3.18
3.18
3.18
6.35
6.35
6.35
24.84
24.84
24.84
24.84
24.84
24.84
26.62 39.70
13.39
16.56
20.70
23.85
27.00
30.18
33.35
36.53
38.10
12.03
14.99
19.05
22.23
25.40
28.58
31.75
34.93
24.84
24.84
24.84
24.84
24.84
24.84
30.35
30.35
30.35
26.62
26.62
9/16-24 NEF
1/16-24 NEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NEF
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1
8
Connector Styles
J
C
LFK
Y
M
BX
LFK
D
Y
M
HB X
Style 57A(219)
film wire terminators
Style 57A
solder
LF
K
G
Y
M
BX
S
S
R
Z
Style 14E
Mounting data
Panel cutouts
62 IN - 57T
Single hole mounting with
threaded shell to accept
accessories
62 IN - 14F
Single hole mounting with
grommet and grommet nut fitted
with integral strain relief clamp
has panel ‘O’ ring seal
9
Jam Nut Receptacles
Shell
Size
08
10
12
12
16
18
20
22
24
A
max B
0.978
24.84
0.978
24.84
0.978
24.84
0.978
24.84
0.978
24.84
0.978
24.84
1.048
26.62
1.048
26.62
1.048
26.62
0.117
2.97
0.117
2.97
0.117
2.97
0.117
2.97
0.117
2.97
0.117
2.97
0.148
3.76
0.148
3.76
0.148
3.76
C
max
sq.
0.942
23.93
1.067
27.10
1.255
31.88
1.380
35.05
1.505
38.23
1.630
41.40
1.817
46.15
1.942
49.33
2.067
52.50
+0.05
(+0.13) +0.005
(+0.13)
F
0.595
15.12
0.595
15.12
0.595
15.12
0.595
15.12
0.595
15.12
1.595
15.12
0720
18.29
0720
18.29
0.753
19.13
Dia.
Max.
G
0.426
10.82
0.552
14.02
0.677
17.20
0.802
20.37
0.927
23.55
1.052
26.72
1.167
29.65
1.292
32.82
1.416
35.97
min Max
K
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.125
3.58
0.125
3.18
0.125
3.18
0.125
3.18
0.125
3.18
0.125
3.18
0.250
6.35
0.250
6.35
0.250
6.35
0.750
19.05
0.875
22.23
1.062
26.98
1.187
30.15
1.312
33.32
1.437
36.50
1.562
38.68
1.687
42.85
1.812
46.05
L M
-0.005
(-0.13)
0.527
13.3
0.652
16.56
0.825
20.70
0.939
23.85
1.063
27.00
1.188
30.18
1.313
33.35
1.438
36.53
1.563
39.70
N
7/16 - UNEF
9/16 - UNEF
11/16 - UNEF
13/16 - UNEF
15/16 - UNEF
1.3/16 - UNEF
1.5/16 - UNEF
1.7/16 - UNEF
Y
0.473
12.03
0.590
14.99
0.750
19.05
0.875
22.23
1.000
25.40
1.125
28.58
1.250
31.75
1.375
34.93
1.500
38.10
9/16-24 NEF
11/16-24 NEF
7/8-20 UNEF
1-20 UNEF
1.1/4-18 NEF
1.3/8-18 NEF
1.1/2-18 NEF
1.5/8-18 NEF
1.1/18-18 NEF
X
Thread
All dimensions in mm
Shell
Size
08
10
12
14
16
18
20
22
24
A
max
1.762
44.75
1.762
44.75
1.762
44.75
1.876
47.65
1.876
47.65
1.876
47.65
2.118
53.8
2.118
53.8
2.250
57.15
B
+0.05
(+0.13)
0.117
2.97
0.117
2.97
0.117
2.97
0.117
2.97
0.117
2.97
0.117
2.97
0.148
3.76
0.148
3.76
0.148
3.76
C
max
sq,
0.942
23.93
0.067
27.10
1.255
31.88
1.380
35.05
1.505
38.23
1.630
41.40
1.817
46.15
1.942
49.33
2.067
52.50
F
+0.005
(+0.13)
0.706
17.93
0.706
17.93
0.706
17.93
0.706
17.93
0.706
17.93
0.706
17.93
0.894
22.71
0.894
22.71
0.927
23.55
G
dia
max
0.828
21.03
0.891
22.63
1.016
25.81
1.141
28.97
1.203
30.56
1.426
36.22
1.426
36.22
1.567
39.80
1735
44.07
H
+0.005
(+0.13)
0.156
3.96
0.188
4.78
0.312
7.93
0.375
9.35
0.500
12.7
0.625
15.88
0.625
15.88
0.750
19.05
0.800
20.32
min
K
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
0.062
1.58
max
0.125
3.175
0.125
3.18
0.125
3.18
0.125
3.18
0.125
3.18
0.125
3.175
0.250
6.35
0.250
6.35
0.250
6.35
0.750
19.50
L
0.875
22.23
1.062
26.98
1.187
30.15
1.312
33.32
1.437
36.50
1.562
38.68
1.687
42.85
1.812
46.05
M
-0.005
(-0.13)
0.527
13.3
0.652
16.56
0.815
20.70
0.939
23.85
1.063
27.00
1.188
30.18
1.313
33.35
1.438
36.53
1.563
39.70
N
+0.005
(+0.13)
0.540
1372
0.665
16.89
0.828
21.03
0.952
24.18
1.076
27.33
1.201
30.50
1.326
33.68
1.451
36.86
1.576
40.03
R
+0.005
(+0.13)
0.572
14.53
0.697
17.70
0.885
22.48
1.010
25.65
1.135
28.83
1.260
32.00
1.385
35.18
1.510
38.35
1.635
41.45
S
1.250
31.75
1.359
34.52
1.531
38.89
1.656
42.06
1.781
45.24
1.891
48.03
2.031
51.59
2.156
54.76
2.277
57.84
Y
0.473
12.03
0.590
14.99
0.750
19.05
0.875
22.23
1.000
25.40
1.125
28.58
1.250
31.75
1.375
34.93
1.500
38.10
X
Thread
9/16-24 NEF
11/16-124 NEF
7/8-20 UNEF
1-20 UNEF
1.1/8-18 NEF
1.1/4-18 NEF
1.3/8-18 NEF
1.1/2-18 NEF
1.5/8-18 NEF
Connector Styles
Csq
LA/F
N
R
SNAMax.
BX
FK
YM
G
Csq Amax.
GH
O/all
rear dia.
max.
M
KX
Y
BF
L
With termination assemblies All dimensions in mm
Cable Mounting Receptacles
Shell
size BC F
Dia X
thread
in inches
Without termination assemblies All dimensions in mm
10
YL
8
10 2.39 23.93 10.54 24.84 14.99 9/16-24 NEF
12 2.39 26.32 10.54 24.84 19.05 11/16-24 NEF
14 2.39 28.70 10.54 24.84 22.23 13/16-20 UNEF
16 2.39 31.07 10.54 24.84 25.40 15/16-20 UNEF
18 2.39 33.45 10.54 24.84 28.58 1 1/16-18 NEF
20 2.59 36.63 13.59 26.62 31.75 1 3/16-18 NEF
22 2.59 39.80 13.59 26.62 34.93 1 5/16-18 NEF
24 2.59 42.98 14.53 26.62 38.10 1 7/16-18 NEF
7/16-28 UNEF
12.03
24.84
10.54
20.75
2.39
Shell
size
Style 11A Style 11E Style 11F Style 11J
G
Dia L M
thread
in inches
G
Dia L G
Dia H
Dia L G
Dia LFor cable size
Z Dia
814.25 14.25
17.43 17.43
20.60 20.60
23.78 23.78
32.54
32.54
32.54
32.54
21.03
22.63
25.81
28.97
14.25
17.43
20.60
23.78
46.89
46.89
49.45
54.54
4.28
5.21
8.59
10.57
5.84
7.93
11.23
13.69
26.95 26.95 32.54 30.56 12.70 47.65 26.95 59.61 13.97 15.65
30.13 30.13
33.30 33.30
36.75 36.75
39.65
41.25
41.25
41.25
41.25
41.25
41.25
42.85
42.85
43.95
UNEF
NEF
UNEF
UNEF
1/ 2-28
5/ 8-24
3/ 4-20
7/ 8-20
1-20 UNEF
1 3/16-18 NEF
1 3/16-18 NEF
1 7/16-18 NEF
1 7/16-18 NEF 39.65
32.54
35.13
35.13
35.13
36.22
36.22
39.80
44.07
3.96
4.78
7.93
9.53
15.88
15.88
19.05
20.32
44.76
44.76
44.76
44.10
47.65
53.80
53.80
57.15
30.13
33.30
36.75
39.65
64.70
71.91
76.99
78.03
15.24
16.13
17.02
18.80
17.07
18.98
21.49
22.71
10
12
14
16
18
20
22
24
Connector Styles
Style 11A Style 11E Style 11F Style 11J
L
M
LL
H
G
G
G
G
Z
L
11PHM/EGM
CLF
B
X
Without termination assemblies All dimensions in mm
size
Shell
8
10
12
14
16
18
20
22
24
Dia
C
19.05
21.82
26.19
29.36
32.54
35.33
38.89
42.06
45.14
L
24.79
24.79
24.79
24.79
24.79
26.79
26.79
26.79
24.79
X
in inches
7/16-28 UNEF
9/16-24NEF
11/16-24 NEF
13/16-20 UNEF
15/16-20 UNEF
11/16-18 NEF
1 3/16-18 NEF
1 5/16-18 NEF
1 7/16-18 NEF
16
Style 16 E Style 16 F Style 16 J
G
Dia LG
Dia H
Dia LG
Dia L
For cable size
Z Dia
min max
With termination assemblies
Notes: 1. Plugs are also available with heavy duty ribbed coupling ring, to order, add deviation (044) at the end of plug part
number.
Style 16 A
Thread
In Inches
L
G
Dia
Shell
size
14.25
17.43
20.60
23.78
26.95
30.13
33.30
36.75
39.61
32.54
32.54
32.54
32.54
32.54
32.54
32.54
32.54
32.54
21.03
22.63
25.81
28.97
30.56
36.22
36.22
39.80
44.07
3.96
4.78
7.93
9.53
12.70
15.88
15.88
19.05
20.32
44.50
44.50
44.50
43.84
47.40
47.40
51.81
51.81
55.32
14.25
17.43
20.60
23.78
26.95
30.13
33.30
36.75
39.61
46.64
46.64
49.20
54.28
59.36
64.45
70.05
75.13
76.25
4.28
5.21
8.59
10.57
13.97
15.24
16.13
17.02
18.80
5.84
7.93
11.23
13.69
15.65
17.07
18.98
21.49
22.71
8
10
12
14
16
18
20
22
24
14.25
17.43
20.60
23.78
26.95
30.13
33.30
36.75
39.61
41.00
41.00
41.00
41.00
41.00
41.00
41.00
41.00
42.11
1/2-28 UNEF
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 NEF
1 3/16-18 NEF
1 7/16-18 NEF
1 7/16-18 NEF
M
11
Connector Styles
CL
X
Style 16A Style 16E Style 16F Style 16J 16PHM/EGM
L
M
G
L
G
G
H
LL
G
Z
Standard is olive drab chromate finish over cadmium plating with straight knurling. To order add suffix -XX to required style, where
XX specifies shell size. It is strongly recommended that these are fitted to provide protection when connectors are not in use. For
alternate finishes or dust covers with heavy duty ribs, contact factory for further details and part number. Dust cap with Nylon cord is also
available. Contact factory for further details.
Dust cover style To fit receptacle
style
with chain with nylon cord
62IN-736 62IN-813 Jam nut
62IN-737 62IN-814 Cable mounting
62IN-738 62IN-812Wall and box mounting
Dust cover style
with chain with nylon cord
62IN-742 62IN-810
For plugs
All dimensions in mm
For receptacles
C
B
A
C
B
A
12
Shell
size A
chain / cord
length
BC
Dia
J Dia
for
receptacles for
plugs
736 737 738
813 814 812
742
810
8 76.20 15.21 15.03 18.64 14.68 11.63 4.40
10 76.20 15.21 15.03 21.82 17.86 14.81 4.40
12 88.90 15.21 15.03 25.40 22.63 17.98 4.40
14 88.90 15.21 15.03 28.57 25.81 22.76 4.40
16 88.90 15.21 15.03 31.75 29.39 25.93 4.40
18 88.90 15.21 15.03 34.92 32.16 29.11 4.40
20 101.60 15.21 15.03 38.10 35.33 32.28 4.40
22 101.60 15.21 15.03 41.27 38.51 35.46 4.40
24 101.60 15.21 15.03 44.45 41.68 38.63 4.40
Dust Covers
Metallic Dust Covers
(Replace XX with the required shell size)
All dimensions in mm
Strain Relief Clamp With Grommet
62IN-585-XX-XXS or XXP
(Replace XX-XX with the required insert arrangement)
Shell size A
max G
max H
max
8 25.17 21.03 4.09
10 25.17 22.63 4.90
12 25.17 25.81 8.05
14 24.51 28.98 9.65
16 28.07 30.56 12.83
18 28.07 36.22 16.00
20 32.64 36.22 16.00
22 32.64 39.80 19.18
24 34.88 44.07 20.45
All dimensions in mm
13
Shell size A
max M
Thread in inches
8 23.80 1/2-28 UNEF
10 23.80 5/8-24 NEF
12 23.80 3/4-20 UNEF
14 23.80 7/8-20 UNEF
16 23.80 1-20 UNEF
18 23.80 1 3/16-18 NEF
20 23.80 1 3/16-18 NEF
22 23.80 1 7/16-18 NEF
24 23.80 1 7/16-18 NEF
Accessories
62IN-776-XX
Shell To Accept Conduit
A
GH
A
M
SIZE
08
10
12
14
16
18
20
22
24
AT’X P/NO.
62IN-08-SQ
62IN-10-SQ
62IN-12-SQ
62IN-14-SQ
62IN-16-SQ
62IN-18-SQ
62IN-20-SQ
62IN-22-SQ
62IN-24-SQ
‘V’ THD.
UNEF-2B
7/16 -28
9/16 -24
11/16 -24
13/16 -20
15/16 -20
1 1/16 -18
1 3/16 -18
1 5/16 -18
1 7/16 -18
MIN.
C
6.6
9.2
12.2
15.2
18.3
20.0
23.0
26.0
28.8
MAX.
D
20
23
27
30
33
36
40
43
46
+0.5
-0.0
G
16
18
22
25
28
32
34
38
41
MAX.
L
36
36
36
37
37
-0.2
SW
18
21
24
28
31
34
37
41
44
RECOMME
NDED
TORQUE’S
(Nm)
+0.50
4
6+0.50
8+1.0
10+1.0
-
13+1.0
-
-
For Shielded Cables
12
14
16
18
20
22
24
SIZE
08
10 17.5
20.0
20.0
21.3
21.3
20.0
‘F’
4.50
4.00
5.50
5.00
‘G’ ‘H’
7/16 -28
9/16 -24
11/16 -24
13/16 -20
15/16 -20
1 1/16 -18
1 3/16 -18
1 5/16 -18
1 7/16 -18
10.2
13.3
16.5
19.5
22.6
25.6
28.8
32.0
35.2
+0.1
‘M’
‘V’ THREAD.
UNEF -2B
62IN-108563
62IN-108564
62IN-108565
62IN-108566
62IN-108567
15.4
18.6
21.8
25.0
28.2
31.3
34.5
37.7
40.9
13.1
15.9
21.2
22.1
26.0
28.4
32.3
34.7
37.9
14.0
17.0
20.3
23.3
26.4
29.5
32.7
35.8
39.0
ATX P/NO
62IN-108559
62IN-108560
62IN-108561
62IN-108562
‘A’
-0.3 -0.2
‘C’
‘B’
15.1
17.9
23.2
24.0
29.3
31.5
35.6
38.0
41.0
+0.5
‘E’
9.2
12.1
15.1
18.4
21.6
24.1
27.3
30.5
33.7
+0.2
‘D’
For Unshielded Cables
14
62IN - Shrink Boot Adaptors
62IN - SQ Adaptors
Accessories
Coupling Nut Retainer Ring Cable Housing
Knurled Nut
Ink Mark A Conn. No. &
Batch Code As Per Bom. ‘SW’
L3.5
CG
DTHD.
V
C
A
B
‘V’
E
D
M
Thread
Chamfer
0.50 X 45 3.5
H
GF
‘X’
Shell
size D E F Dia G Dia H
max
8 20.62 15.08 12.90 3.30 1.06
10 23.82 18.26 16.07 3.30 1.06
12 26.18 20.65 19.25 3.30 1.06
14 28.57 23.01 22.42 3.30 1.06
16 30.96 24.61 25.60 3.30 1.06
18 33.32 27.00 28.77 3.30 1.06
20 36.52 29.36 31.95 3.30 1.06
22 39.70 31.75 35.13 3.30 1.06
24 42.87 34.92 38.30 3.96 1.06
62IN-760-XX
(Replace XX with the required shell size)
All dimensions in mm
All dimensions in mm
Part number For shell size X Thread
in inches
62IN08-PG7 8 7/16-28 UNEF 16.50 14.50 20.00 PG7
62IN10-PG9 10 9/16-24 NEF 22.00 17.70 20.00 PG9
62IN12-PG9 12 11/16-24 NEF 22.00 21.00 20.00 PG9
62IN14-PG13.5 14 13/16-20UNEF 28.00 23.50 25.00 PG13.5
62IN16-PG9 16 29.00 27.80
62IN18-PG16 18 1 -18 NEF
31.50 31.00
35
.00 PG16
A B L PG Thread
30.00 PG 9
62IN20-PG21 20 13/16-18 NEF
. 35 00 34.00 40.00 Pg21
62IN24-PG16 24 17/16-18 NEF 41.50 40.50 40.00 PG16
15/16-20 NEF U
/16
15
PG Adaptors with ‘O’ ring
Flange Mounting Gasket
Accessories
D Sq H
F
E
G
PG
A
B
X
L
16
“E” Thread
Cable Size
“C”
*Metal Sleeve
*EGM - Supplied with metal sleeve for shielded cable
PHM - Supplied without metal sleeve for unshielded cable
“C” Ref. PG Size
(Cable Size in mm) “E” Thread
For Straight
30.00
35.00
PG 11
(4 to 10)
PG 11
(4 to 10)
PG 11
(4 to 10)
PG 21
(11 to 18)
PG 21
(11 to 18)
PG 21
(11 to 18)
PG 21
(11 to 18)
PG 21
(11 to 18)
PG 21
(11 to 18) 1 7/16” -18 UNEF
7/16” -28 UNEF
9/16” -24 NEF
11/16” -24 NEF
13/16” -20 UNEF
15/16” -20 UNEF
1 1/16” -20 UNEF
1 3/16” -18 UNEF
1 5/16” -18 NEF
Shell
size
24
8
10
12
14
16
18
20
22
EGM/PHM11 Can accept cable Min 5.70 mm & Max 10.85 mm
EGM/PHM21 Can accept cable Min 12.70 mm & Max 17.85 mm
Back-Shell
EGM/PHM Adaptor
SHELL
SIZE MAX. MIN.
A B CD
+ 0.0
- 0.51 + 0.20
- 0.0
‘V’ THREAD
UNEF-2B CONNECTORS P/NO.
08
10
12
14
16
18
20
22
24
15.67
18.64
21.79
24.99
28.24
30.94
34.16
32.79
40.46
6.35
9.02
12.47
14.35
17.53
19.53
22.71
25.88
28.80
13.54
15.37
19.66
21.29
24.46
26.47
30.91
34.42
36.65
1.12
1.75
7 / 16” -28
9 / 16” -24
11 / 16” -24
13 / 16” -20
15 / 16” -20
1 1 / 16” -18
1 3 / 16” -18
1 5 / 16” -18
1 7 / 16” -18
M85049 / 60-1-W-8-IN
M85049 / 60-1-W-10-IN
M85049 / 60-1-W-12-IN
M85049 / 60-1-W-14-IN
M85049 / 60-1-W-16-IN
M85049 / 60-1-W-18
M85049 / 60-1-W-20
M85049 / 60-1-W-22
M85049 / 60-1-W-24
17
Shrink Boot Adaptor
Back-Shell
‘A’ ‘V’ THREAD 3.56/3.50
‘D’
‘B’ ‘C’
10.80 MAX.
28.58 MAX.
INK MARK A CONN. NO.
AS PER BOM.
8
10
12
14
16
18
20
22
24
Shell
Size DRG. No.
500238-8
500238-10
500238-12
500238-14
500238-16
500238-18
500238-20
500238-22
500238-24
‘C’
-2A THREAD.
9/16”-24NEF
5/8”-24UNEF
3/4”-20UNEF
7/8”=20UNEF
1”-20UNEF
1 3/16”-18UNEF
1 7/16”-18NEF
L
MAX.
20.80
21.70
23.35
24.85
26.45
28.70
29.60
31.60
33.60
A
MAX.
18.85
21.70
24.60
27.85
31.2.
34.15
37.25
40.65
44.00
B
0.13
7.30
10.18
13.35
16.26
19.40
22.00
24.20
28.50
31.65
+
-
18
B
0.13
+
-
8
10
12
14
16
18
20
22
24
Shell
Size
A
MIN. MAX.
C
MAX.
D
MAX
Closed
‘L’
MAX.
4.28
5.21
8.59
10.57
13.97
15.24
16.13
17.02
18.80
5.84
7.93
11.23
13.69
15.65
17.07
18.98
21.49
22.71
3.96
4.78
7.93
9.58
12.70
15.88
15.88
19.05
20.32
21.03
22.63
25.81
28.97
30.56
36.22
36.22
39.80
44.07
4.75
7.14
8.26
9.04
11.58
13.18
16.69
40.50
48.00
54.50
59.00
67.00
73.40
77.00
JC Clamp Backshell
Right Angle Backshell
Back-Shell
A
B
‘C’
L
‘A’
‘L’
‘B’
D
c
19
Industrial Version Crimp Contacts
Standard deviations for finishes & features
Specials
For special requirements, please contact factory with specifications and drawings. Amphenol has in-house capability to meet
and custom build your special requirements for its range of MIL-C-26482 62IN series connectors.
62IN series connectors are also available with rear release crimp contacts for industrial applications.
These contacts can be crimped to wires outside the connector and then inserted into place with the help
of designated tools. Connector maintenance is simplified because damaged contacts can be removed by
using the designated removal tool and replaced with a new contact. Spare contacts are also available.
* Consult factory for availability.
Deviation number
(4)
(5)
(044)
(218)
(219)
(220)
(624)
(0PX)
(416)
*(608)
(622)
(714)
(720)
(725)
(56T)
(LC)
(N00)
(N01)
Description
Gold flash on contacts
Crimp contact
Rough grip heavy duty coupling ring (for plugs only)
Coupling ring with lever arrangement
Film wire termination (short) for flexible printed wiring (57A and 12E styles only)
Film wire termination (long) for flexible printed wiring (57A and 12E styles only)
Cadmium free zinc-cobalt Plating-black finish
Premating contact (X denotes premating contact designation)
Electroless Nickel Plating
Black anodised finish
Cadmium free zinc-cobalt Plating-olive drab finish
Cadmium over electroless Nickel
Cadmium plating with black chromate
Zinc plating with olive drab finish
Plug connector with threaded shell & serration to accept the cable accessories
Less contact
Connector without marking
Connector with customer requested marking
(15A) Plug connector with threaded shell to accept the cable accessories
(726)
Electrophoratic Finish
Recommended Tightening Torques
A) Single hole Fixing Receptacle ( Panel Nut tightening)
Shell Size
Nm
Lbf.ins
8
3.73
33
10
4.07
36
12
6.78
60
14
7.34
65
16
8.25
73
18
9.26
82
20
11.98
106
22
13.9
123
24
15.03
133
8
3.79-3.96
25-40
10
3.96-4.52
35-40
12
4.52-5.09
40-45
14
5.09-5.65
45-50
16
5.65-6.78
55-60
18
6.78-7.91
65-70
20
8.48-9.04
75-80
22
9.61-10.17
85-90
24
10.74-11.3
95-100
Shell Size
Nm
Lbf.ins
Crimping Tool
Insertion & Removal Tool
MILITARY P/N
M22520/1-01
M22520/1-02
DMC P/N
Af8
TH1A
DESCRIPTION
Tool Frame
Turret
Contact size
20
16
Insertion Removal Tool Part Number
62IN-IR-20
62IN-IR-16
B) Accessory Tightening
Specials and Deviations
C04:-Crimp connectors with few solder contact (Position need to mention)
20
To obtain a specific connector number, write down the connector number from the typical example below. Only inserts shown on page 5
can be specified. Connectors are delivered with protective dust caps. Deviations specified on page 15 must be included at the end of the
connector number whenever required.
Deviations
See page 19
Shell finish (Deviations)
Standard-Cadmium plating with
olive drab chromate finish
Alternate finishes
1. Cadmium free zinc-
cobalt plating with olive drab
chromate finish
Ref page No. 19 for codes
For details contact factory
62IN 57 E
Series designation
62IN - MIL -C-26482 series I
miniature bayonet lock
-
18 -32 P X
Key specification
1 - as per MIL-C-26482
5 - as per BS 9522 F0017
Shell style
0- Wall mounting receptacle
1- Cable connecting
receptacle
2- Box mounting receptacle
4- Jam nut receptacle,
Internally threaded with
Cable accessories
5- Plug without back
accessories
6- Plug
7- Jam nut receptacle, plain
Shell
8- Right Angle Back Shell
with cable clamp (less grommet)
Connector class
A- Plain shell, exposed solder
Buckets, no grommet.
E - Insert and grommet with
Grommet nut (excluding 12E
Which has plain shell and no
Grommet or grommet nut).
F- Same as E, but grommet nut
With strain relief clamp.
J- Same as E, but with resilient
Gland seal and nut for
Unscreened jacketed cable,
No grommet.
T- Threaded shell for cable
Accessories, exposed solder
Buckets.
TG- Same as T, but shell has
Grounding fingers.
Orientation
Inserts -
W - X - Y - Z
(Omit for normal)
OR
Key / Keyway -
B - C - E - F
See pages 3 and 4.
Contact style
P - Pin contacts
S - Socket contacts
Insert arrangement
First box indicates shell size -
8, 10, 12, 14, 16, 18, 20, 22, 24.
Both boxes together indicate the exact
insert arrangement.
See page 5.
PG - Plug with straight PG threaded
Backshell
PHM - Supplied with different diameter
sleeves to suit varying cable
sizes. Used for unshielded cables
Supplied with different diameter
sleeves to suit varying cable
sizes. Used for shielded cables
SQ - Used for shielded cables
SB - Used for unshielded cables
EGM -
Notice: All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design
advances, Amphenol reserves the right to change specifications without notice. This publication AC6201 03/13 supersedes all
existing Amphenol literature on 62IN series connectors.
Ordering 62IN Series Connectors
www.amphenol-in.com
105, Bhosari Industrial Area,
Pune - 411 026.
Tel.: 91-20-30688303, 30688304
Fax : 91-20-30688321
Email : vbhavsar@amphenol-in.com
sales@amphenol-in.com
Export
105, Bhosari Industrial Area,
Pune - 411 026, India.
Tel.: 91-20-30688305, 30688353
Fax : 91-20-27129158
Email : svpatil@amphenol-in.com
4931, 11th Floor, High Point IV
45, Palace Road, Bangalore 560 001.
Tel.: 91-80-22281392, 22281002
Fax : 91-80-22253859
Email : kmanoj@amphenol-in.com
MARKETING
HEADQUARTERS Southern Region Northern and Eastern Region
1414, 14th Floor, Chiranjiv Tower,
43, Nehru Place, New Delhi - 110 019.
Tel. : 91-11-26449177
Telefax : 91-11-26449176
Email : sunily@amphenol-in.com
107, 1st Floor, ‘Am Sri Classic’,
Sarojinidevi Road, Secunderabad - 500 003.
Telefax : 91-40-66332906
Email : pprasad@amphenol-in.com
Central Region
105, Bhosari Industrial Area,
Pune - 411 026.
Tel.: 91-20-27119735, 30688334
Fax: 91-20-27120581, 27119735
Email : sunilp@amphenol-in.com
Western Region
Our offices in India:
Pune Operations Bangalore Operations
