A COMPANY OF MODELS RC, RCWP, RCW Thick Film Chip Resistors DALE. Industrial FEATURES * Wide design flexibility for use with hybrid circuitry * Termination: Solder pre-tinned electrodes a a) a * Operating temperature range: - 55C to + 150C standard. Geld, platinum gold or palladium * 95% minimum alumina body * Dale has capability to develop specific reliability * Custom sizes designed for special applications programs designed to customer requirements RESISTANCE (Ohms) & T.C. RANGE* MAXIMUM POWER | | RC RCWP/RCW _.____.1% to 2% ___2% to 20% OPERATING RATING | | (One-surface termination) (Wrap-around termination) MODEL 100PPM/C 200PPM/C 300PPM/C VOLTAGE @ 70C . . RC-550 10-1M 5-2M 5-4.7M 50 VDC 100 mw lV C+ .005 j/ C +.005 RCWP/RCW-550 4 | aan i} be tar RC-575 10-1M 5-5M 5-10M 7OVDC 150mWw ROWP/RCW-575 B + .005 B + 005 RGC-5100 10-1M 10-5M 10-15M 100 VDC 200 mw [+ .127] -r\ j* fe .127] >| |< FOWRREW100 | mes, CO ass AC-5150 10-1M 10-5M 10-15M 125VDC 350mw i< Ax ;oo8 | as coos |, 935 * 008 RCWP/RCW-5150 {+ 127] RC-1100 10-1M 5-5M 5-7.5M 400 VDC 400mW [Numbers in brackets indicate millimeters] RCWP/RCW-1100 MODEL A B c RC-7225 10-1M 10-5M 10-15M 200VDC 600mW | | AC-550 050 [1.27] 010 [.254] 050 [1.27] aM EM SOEM oO VDO 800 mW RCWP/RCW-550 .055 [1.40] .010 [.254] .050 [1.27] -201 10- : - m RCWPIRCW.-2010 RC-575 075 [1.91] 015 [.381] .050 [1.27] RCp5ID TOM 105M j05M B00 VDG 1000 mw | LRCWP/RCW-575 .080 [2.03] 015 [.381} .050 [1.27] RCWP/RCW-2512 RC-5100 .100 [2.54] .015 [.381] .050 [1.27] RG-1206 10-1M 10-5M 10-10M 100 DG 250mw | | RCWP/RCW-5100 .105 [2.67] .015 [.381] .050 [1.27] RCWP/RCW-1206 RC-5150 .150 [3.81] .015 [.381] .050 [1.27] RC-540 10-1M 5-2M 5-4.7M 40VDC 8O0mW RCWP/RCW-5150 155 [3.94] .015 [.381] 050 [1.27] RCWP/RCW-540 RC-1100 .100 [2.54] 015 [.381] .100 [2.54] * Consult factory for extended resistance range. ACWP/RCW-1 100 .105 [2.67] .015 [.381] -100 [2.54] RC-7225 225 [5.72] .015 [.381] 075 [1.91] RCWP/RCW-7225 .230 [5.84] 045 [381] .075 [1.91] 120 RC-2010 .200 [5.08] .015 [381] 100 [2.54] 2 100 RCWP/RCW-2010 .205 [5.21] 015 [384] .100 [2.54] a 80 RC-2512 .250 [6.35] 015 [.384] .125 [3.18] er ROWP/RCW-2512 256 [6.48] 015 [.381] 4125 [3.18] r 0 RC-1206 .120 [3.05] .015 [.381] .060 [1.52] $ * RCWP/RCW-1206 .125 [3.18] 015 [.381] .060 [1.52] 30, 500 700 90 110 130 150170 RC-540 .050 [1.27] .010 [.254] .040 [1.02] AMBIENT TEMP. DEG. CENTIGRADE ACWP/RCW-540 .055 [1.40] 010 [.254] .040 [1.02] RC - 5100 _ 103 Ge __ 40 MODEL SIZE RESISTANCE TOLERANCE TERMINATION i tt | ai RC = One-surface termination First two digits (three for F F=+1% No Code = Solder Pre-tinned (standard) RCW = Wrap-around termination tolerance) are significant G=t2% 20 = Gold (RC only) RCWP = Wrap-around termination, pours. Last dlait species J=+5% 40 = Platinum Gold (RC and RCW only) pre-tinned nickel barrier follow. K=+10% 42 = Palladium Silver (RC and RCW only) M = + 20% 98 DALE ELECTRONICS, INC., 2300 Riverside Blvd., Norfolk, NE 68701-2242 * Phone (402) 371-0080 * Fax 402-644-4206A COMPANY OF CHECKLIST FOR ORDERING FILM RESISTORS DALE, ORDERS MUST HAVE COMPLETE INFORMATION INCLUDING THE FOLLOWING: 1. Resistor type and model number 9. If you have a drawing covering the part, specify your part number and drawing 2. Resistor wattage rating number and supply a copy with the order. including the Dale specification 3. Resistor value number on your drawings will assure you of exact duplication on all 4. Resistor tolerance future orders. 5. Temperature Coefficient 10. Priority rating under DMS regulations and contract number (if applicable). 6. Special quantity of each item 11. Specify if Letter of Certification is required. 7. Specify routing 12. Prices on specific items and quantities will be quoted on request. Quantity of 8. Desired delivery each item ordered at one time determines unit price for manufacturers orders. STANDS The following table lists four established number series which are used as preferred values in electronic design. Each series is shown under an associated value of tolerance %. The number series under the 10% column is known as the E12 Series because there are 12 standard values within a decade range. 2% and 5% utilize the E24 Series, 1% uses E96 and .1%, .25% and .5% use E192. Successive values within a decade series are related (approximately) by a factor of 2/710 for the E12 Series, **V10 for the E24 Series, *V10 for the E96 Series and '%2V10 for the E192 Series. Use of standard values is encouraged because stocking programs are designed around them. However, intermediate values can be special ordered where permitted. Consult factory. 1%, .25%, -1%, .25%, 1%, .25%, -1%, .25%, -1%, .25%, 1%, .25%, 1%, .25%, 1%, .25%, 5% 1% 5% 1% 5% 1% 5% 1% 5% 1% 5% 1% 5% 1% 5% 1% | 2%, 5% | 10% 10.0 10.0 13.3 13.3 17.8 17.8 23.7 23.7 31.6 31.6 42.2 42.2 56.2 56.2 75.0 75.0 10 10 10.1 13.5 18.0 24.0 32.0 42.7 56.9 75.9 11 _ 10.2 10.2 13.7 13.7 182 18.2 24.3 24.3 32.4 32.4 43.2 43.2 57.6 57.6 76.8 76.8 12 12 10.4 13.8 18.4 24.6 32.8 43.7 58.3 777 13 _ 10.5 10.5 14.0 14.0 18.7 18.7 249 249 33.2 33.2 44.2 44.2 59.0 59.0 78.7 78.7 15 15 10.6 14.2 18.9 25.2 33.6 44.8 59.7 79.6 16 _ 10.7 10.7 14.3 143 19.1 19.1 25.5 25.5 34.0 34.0 45.3 45.3 60.4 60.4 80.6 80.6 18 18 10.9 14.5 19.3 25.8 34.4 45.9 61.2 816 20 _ 11.0 11.0 147 14.7 19.6 19.6 26.1 26.1 34.8 34.8 46.4 46.4 61.9 619 82.5 82.5 22 22 Ww. 14.9 19.8 26.4 35.2 47.0 62.6 83.5 24 _ 11.3 11.3 15.0 15.0 20.0 20.0 26.7 26.7 35.7 35.7 47.5 475 63.4 63.4 845 84.5 27 27 11.4 15.2 20.3 27.4 36.1 48.1 64.2 85.6 30 _ 11.5 11.5 15.4 15.4 20.5 20.5 27.4 27.4 36.5 36.5 48.7 48.7 64.9 64.9 86.6 86.6 33 33 11.7 15.6 20.8 27.7 37.0 49.3 65.7 87.6 36 _ 11.8 11.8 15.8 15.8 21.0 21.0 28.0 28.0 37.4 37.4 49.9 49.9 66.5 66.5 88.7 88.7 39 39 12.0 16.0 21.3 28.4 37.9 50.5 67.3 89.8 43 _ 12.4 12.1 16.2 16.2 21.5 21.5 28.7 28.7 38.3 38.3 51.1 51.1 68.1 68.1 90.9 90.9 47 47 12.3 16.4 21.8 29.1 38.8 51.7 69.0 92.0 51 _ 12.4 12.4 16.5 16.5 22.1 22.1 29.4 29.4 39.2 39.2 52.3 52.3 69.8 69.8 93.1 93.1 56 56 12.6 16.7 22.3 29.8 39.7 53.0 70.6 94.2 62 _ 12.7 12.7 16.9 16.9 22.6 22.6 30.1 30.1 40.2 40.2 53.6 53.6 71.5 71.5 95.3 95.3 68 68 12.9 17.2 22.9 30.5 40.7 54.2 72.3 96.5 75 _ 13.0 13.0 17.4 17.4 23.2 23.2 30.9 30.9 412 41.2 54.9 54.9 73.2 73.2 976 97.6 82 82 13.2 17.6 23.4 31.2 417 55.6 74.1 98.8 a ~ Standard resistance values are obtained from the decade table by multiplying by powers of 10. As an example, 13.3 can represent ohms, 133 ohms, 1.33k, 13.3k, 133k, 1.83 Megohm. 90 DALE ELECTRONICS, INC., 2300 Riverside Bivd., Norfolk, NE 68701-2242 * Phone (402) 371-0080 Fax 402-644-4206Military Product Identification To heip in ordering, the following are representative samples of military part numbers cross-referenced to Dale part numbers. For complete information, consult Military Specification Qualified Products List. A GOMPANY OF VIS HA Y RESISTORS: Fixed and Variable MIL-R-2G6E (Basic [RW)) (Established Reliability MIL-R-39007 [RWR]) 1. Style 1. Style RWs0 U 49R9 F = _ DaleType G3 49.9 ohm 1% 2. Characteristic 2. Characteristic T > 5 r T a Tr 3. Resistance Value 3. Value (Tolerance 4. Tolerance below 1 chm 10%, RW69 Vv 101 = Dale Type CW-2C-1 100 ohm, 5% 1 ohm and up 5%) 1 2 3 1 3 MIL-R-10509F (Basic [RN]) (Established Reliability MIL-R-55182 [RNR}} 1. Style RN6O D 1003 EF = DaleType CMF-60 T-1 100k 1% 2. Characteristic - Temperature Coefficient T a a ra T a 3 re 3. Resistance Value 4. Tolerance MIL-R-18546D (Basic [RE]) (Established Reliability MIL-R-39009 [RER]) 1. Style RE6S G 1001 = DaleType RH-10 1k NOTE: 1% tolerance per 2. Characteristic - Maximum continuous _ _ Military Specification. operating temperatures i 2 3 1 3 3. Resistance Value MIL-R-22684C (Basic [RL]) (Established Reliability MIL-R-39017 [RLR]) ote 1. Style _ 7 NOTE: Paris will be 2. Terminal RLO7 3 e + = Dale Type oMro? OK a color banded. 3. Resistance Value 4. Tolerance MIL-R-22097F (Basic (RJ]) (Established Reliability MIL-R-39035 [RJR}) 1. Style RJ24 F P 103 = TechnoType 412 1k 10% NOTE: 10% tolerance per 2. Characteristic = z> FT az > Military Specification. - bermina 1 2 3 4 1,3 4 <P 4. Resistance MIL-R-27208C (Basic (RT]) (Established Refiability MIL-R-39015 [RTR]) 1. Style 4. Terminal RT24 C 2 P 102 = TechnoType 1265 1k 5% NOTE: 5% tolerance per | 2. Resistance - 5. Resistance 7 > 57 =z ja & Military Specification. Temperature Characteristic , 3. Temperature Characteristic MIL-R-39007G (Established Reliability [RWR]) (Basic - MIL-R-26 [RW)]) 1. Style 5. Failure Rate Level RWR74 S 10R1 F R = ODaleType ESS5 101ohm 1% R 2. Terminal T z a ZS 7 3 a 5 3. Resistance Value 4. Tolerance MIL-R-39009C (Established Reliability [RER]) (Basic - MIL-R-18546 [RE]) 1. Style RER65 F 1001 R = DaleType ERH-10 1% 1k R 2. Tolerance 7 a 5 a T a 3 4 3. Resistance Vaiue 4. Failure Rate Level MIL-R-39015C (Established Reliability [RTR]) (Basic - MIL-R-27208 [RT]) 1. Style - RTR24 D P 102 R = TechnoType M39015/3 007 PR 3 Characteristic 1 2 3 4 5 1,2 4 3 5 4, Resistance NOTE: 5% tolerance per Military Specification. 5. Failure Rate Level MIL-R-39017E (Established Reliability [RLR]) (Basic - MIL-R-22684 [RL}) : sue IT 5. Failure Rate Level _ 7 . Terminal Type RLRO7 c 1002 G R_ = _ Dale Type ERL-O7 10k 2% R 3. Resistance Vatue 1 2 3 4 5 1 3 4 5 4. Tolerance MIL-R-39035B (Established Reliability [RJR]) (Basic - MIL-R-22097 (Ru]) 1. Style RUR24. F P 102 R = TechnoType RJR24 F P ik 10% 5 Characteristic 1 2 3 4 5 1 2 3 4 4, Resistance NOTE: 10% tolerance per Military Specification. . Failure Rate Level MIL-R-49465A (Basic [RLV]) (Established Reliability - None) NOTE: 1. Military Specification 4. Resistance Value Mag465 02 L RO100 J = DaleType CPSL-36 0.01chm 5% Characteristic. | > specication 5. Tolerance 1 2 3 4 5 4 5 3. Characteristic MIL-R-55182F (Established Reliability [RNRA]) (Basic MIL-R-10509 [RN]) 1. Style _ . . 2. Characteristic/Temperature Coefficient RNCS5 H 49R9 F Ss = Dale Type ERC-55 Le 49.9 ohm 1% s 3. Resistance Value 1 2 3 4 5 1 2 3 4 5 4. Tolerance 5. Failure Rate Level MIL-R-55342E (Established Reliability [RM]) (Basic - None) 1. Military Specification 2. Characteristic M5342 M 02 S 100E R = DaleType RCM5S0 100k 1% A 3, Specification Sheet Number 1 2 3 4 5 6 3,4 5 5 6 4. Termination Material NOTES: M Characteristic 5. Resistance Value and Tolerance One surface, pretinned, solderable terminations. 6. Failure Rate Level 155342 is used for 07 detail specification sheet. Separate code for resistance value and tolerance is used in this Military Specification. 378 DALE ELECTRONICS, INC.Military Product Identification RACK AND PANEL CONNECTORS MIL-C-28748A (Basic) (Established Reliability - None) 1. Military Specification 5. Shell Polarization (0 = None) 2. Specification Sheet Number 6. Jackscrews or Guidepins M28748 7 BOO O F 1A = DaleType MMP22G5 7 SL2L | 3 Insert Designator (B-7 Contacts) 7. Contacts 1 2 3.44 5 6 7 7 3 6 4. Shield (0 = None) (1A = 100 percent size 22) RESISTOR NETWORKS MIL-R-83401F (Basic [RZ]) (Established Reliability MIL-R-874 [RZR]) i. Military Specification | ' 5. {olerance _ NOTE: . Specification Sheet Number 6. Schematic M6340101 M 1003 G A = DaleType MDM 100k 2% A M Characteristic. 3. Characteristic 1,2 3 4 5 6 4 5 6 4. Resistance Value Resistance Value Examples Three Digit Figure Four Digit Figure Five Digit Figure 100 = 10 ohm, 101 = 100 ohm 49R9 = 49.9 ohm, 1000 = 100 ohm 10R60 = 10.6 ohm, 10000 = 1k ohm 102 = 1k ohm, 203 = 20k ohm 1001 = 1k ohm, 1004 = 1 Megohm 12701 = 12.7k ohm, 10202 = 102k ohm Tolerance Examples A=+0.05% B=+0.10% D=+0.50% F=+1.0% G=+2.0% J=+ 5.0% TRANSFORMERS AND INDUCTORS MIL-T-27E (Basic [TF]) (Established Reliability - None) } Miltary Specification b - . Specification Sheet Number Mer *e * = DaleType TE-3Q0TR = 1.0 mH 2% 3. Specification Sheet Dash Number Indicating Value and Electrical Ratings MIL-C-15305E (Basic [LT]) (Established Reliability MIL-C-39010) 1. Style NOTES: Parts will be color banded. 2. Grade and Class I 4 = Dale Type = IM-2(.10 HH to 1.00 nH) 10% wage Per Miltary Standard 3. Family K = Coil, Radio Frequency, Fixed BAND A&B BAND C BANDA&B BAND C BAND C 1st and 2nd SIGNIFICANT | MULTIPLIER* or SIGNIFICANT VALUE FIGURES or SIGNIFICANT INDUCTANCE COLOR FIGURE COLOR MULTIPLIER COLOR DECIMAL POINT FIGURE TOLERANCE Black 0 Black 1 Black 0 1 _ Brown 1 Brown 10 Brown 1 10 +1% Red 2 Red 100 Red 2 100 2% Orange 3 Orange 1,000 Orange 3 1,000 +3% Yellow 4 Yellow 10,000 Yellow 4 10,000 +4% Green 5 Green 100,000 Green 5 _ Blue 6 Blue 1,000,000 Blue 6 _ _ Purple (Violet) 7 Silver 0.01 Violet 7 _ _ Gray 8 Gold 0.1 Gray 8 _ _ White 9 White 9 _ _ None** _ _ + 20% ValueTa ep clo E Silver _ = + 10% Gold Decimal Point _ 5% C3 9 8) : Significant Figures Multiplier or First ; 4 Terminat or Decimal Point Significant Figure Significant Figure (1 1/2 times width of other bands) Inductor Identifier (Silver) 1 Tolerance Second Tolerance t+ + Significant Figure Multiplier Radio Frequency i Coils BAND D BAND E Twice the Width 4 f Other Band RESISTANCE ener mands TOLERANCE Band "A" is twice the width of the other bands and is silver in COLOR (Percent) COLOR TERMINAL color to identify part as an inductor. *** o - Gold + 5% White Solderable For Inductance Values Less Than 10 either Band "B" or Oy . . . . Red + 2% Band C" will be gold and will represent the decimal point. The 8 1/2 x 11 & Pocket-Size Color Code ID Charts For a 8 1/2 x 11 chart, or a supply of pocket-size charts showing actual colors used in marking film resistors and RF chokes, write to Dale Electronics, Inc., Advertising Department, 2064 12th Avenue, P.O. Box 609, Columbus, NE 68602-0609 or call (402) 563-6417. Indicate size and type of chart desired: Film Resistor chart or RF Choke. other two bands ("B" and "D" or "C" and "D") will represent significant figures. For Inductance Values of 10 or More Band "B" and Band "C" represent significant figures and Band "D" is the Multiplier. For small units, dots may be used in place of bands. * The multiplier is the factor by which two significant figures are multiplied to yield the nominal inductance value. ** Indicates body color. *** Coated inductors are marked with four color bands, the first being a double wide significant figure or decimal point in lieu of the double wide silver inductor identifier. DALE ELECTRONICS, INC. 379