Technical Data February 2012 3MTM BumponTM Protective Products Die Cut Shapes - SJ5200 Series SJ5201 * SJ5202 Product Description 3MTM BumponTM Protective Products SJ5201 and SJ5202 are pressure-sensitive, adhesive backed polyurethane products made from SJ5200 Series soft foam rollstock. A hexagon shape is often preferred for various cushioning stop and non-skid foot applications. These products have a very high tack adhesive system (synthetic rubber, R-25), which has the capability of providing excellent adhesion to a wide variety of substrates. This includes many low surface energy substrates such as polypropylene, polyethylene, and powder coated paints. Product Construction Product Number 3MTM BumponTM Protective Products SJ5201 3MTM BumponTM Protective Products SJ5202 Width, inches (mm): 0.433 (11.0) 0.433 (11.0) Height, inches (mm): 0.125 (3.2) 0.063 (1.6) Form: 11 x 12 matrix 11 x 12 matrix Color: Light brown Light brown Bumper Material: Polyurethane foam Adhesive: Release Liner: Synthetic rubber (R-25) 4 mil, silicone coated, translucent polyester (PET), with printed 3M logo All dimensions are 0.020 inches or 0.5 mm measured without the adhesive liner. 3 3MTM BumponTM Protective Products Die Cut Shapes - SJ5200 Series SJ5201 * SJ5202 Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Property Test Method Hardness, Shore M: ASTM D-2240 3MTM BumponTM Protective Products SJ5201 SJ5202 29 Approximate Density: lb./ft.3 (gm/cm3) 36 40 (0.64) Compression Set,%: ASTM D-1056 22 hrs. @ 158F (62C) (50% defection) < 10% Stain Resistance:** 3M - 24 hrs. @ 158F (62C) against white paint, 7 days exposed to UV. no staining observed UL Certification SJ5200 Series are not rated Flammability Listing: Service Temperature: -30F (-34C) to 150F (66C); 225F (107C) intermittent exposure. Application Temperature: 40F (5C) to 125F (52C) **Reference test for 24 hours. Results may vary for different time periods and conditions. Adhesive Performance Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. The following table on peel adhesion provide representative performance characteristics of the adhesive system used in the construction of 3MTM BumponTM Protective Products Die Cut Shapes SJ5200 Series 90 Peel Adhesion* Peel Force, oz. Per 1/2 inch 3MTM BumponTM Protective Products SJ5200 Series Substrate: Synthetic Rubber R-25 Polypropylene 52 Polystyrene 55 ABS 55 Stainless Steel 55 Aluminum 55 *3M Test Method TM-2011; 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using solid resilient rollstock (SJ6216) with same R-25 adhesive system. (2) 3MTM BumponTM Protective Products Die Cut Shapes - SJ5200 Series SJ5201 * SJ5202 Environmental Performance 3MTM BumponTM Protective Products are intended for interior applications where resilience and other physical properties will remain unchanged. Exposure to UV light for extended periods may cause slight discoloration or yellowing. Bumpon products may be used outdoors in a protected area with possible discoloration and chalking. Simultaneous exposure to high humidity and temperature may degrade (soften) the product composition. Features * Soft, low compression set polyurethane foam. * Excellent sound dampening. * Vibration and shock dampening. * Long aging resiliency - will not crack or harden. * Easy to apply - just peel the bumpers from the easy release liner, position, and apply pressure. No tools required; no holes required. Application Ideas Cabinet Door Application Idea * Bumper on cabinet doors. 3MTM BumponTM Products * Bumper on drawers and lids. * Cushions or spacers on electronic equipment. Cabinet Door * Skid-resistant feet on desk-top equipment. Cabinet Face Frame Application Techniques To obtain maximum adhesion, surfaces should be flat, dry, and free of contaminants. Clean surfaces with low strength solvents such as isopropyl alcohol (rubbing alcohol) or heptane.* Apply firm pressure to increase the contact of the adhesive with the substrate. Allow time (dwell) to increase adhesion. *Note: Be sure to follow the manufacturer's precautions and directions for use when using solvents. Storage Store in original cartons at 60-80F (16-27C) and 40-50% relative humidity. Shelf Life To obtain best performance, use this product within 18 months from date of manufacture. (3) 3MTM BumponTM Protective Products Die Cut Shapes - SJ5200 Series SJ5201 * SJ5202 Certification/Recognition MSDS: Refer to Product Label and Material Safety Data Sheet for Health and Safety Information before using this product. TSCA: This product is defined as an article under the Toxic Substances Control Act and therefore, it is exempt from inventory listing requirements. RoHS: This product complies with the requirements of EU Directive 2002/95/EC and 2005/618/EC. For Additional Information To request additional product information or to arrange for sales assistance, call toll free 1-800-251-8634. Address correspondence to: 3M, Electronics Markets Materials Division, 3M Center, Building 225-3S-06, St. Paul, MN 551441000. Our fax number is 651-778-4244 or 1-877-369-2923. In Canada, phone: 1-800-364-3577. In Puerto Rico, phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronics Markets Materials Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 1-800-251-8634 phone 651-778-4244 fax www.3M.com/Bumpons 3M and Bumpon are trademarks of 3M Company. Please recycle. Printed in U.S.A. (c) 3M 2012. All rights reserved. 60-5002-0525-1 (4) 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: SJ-5202 LT BROWN SJ-5201 LT.BROWN SJ-5201-Brown/Foam-Pack