Bridge Rectifier Features: * * * * * * Glass Passivated. Surge overload rating : 60 amperes peak. Ideal for printed circuit board. Mounting position : Any. Reverse Voltage : 50V Forward Current : 2 Amperes Max. Ratings and Electrical Characteristics: Rating at 25C ambient temperature unless otherwise specified. Resistive or inductive load, 60 Hz. For capacitive load, derate current by 20%. Characteristics Symbol KBP2005G Max. Recurrent Peak Reverse Voltage Vrrm 50 Max. RMS Bridge Input Voltage Vrms 35 Max. DC Blocking Voltage Vdc 50 Max. Average Forward Rectified Output Current at Ta = 50C I(av) 2 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Super Imposed on Rated Load Ifsm 60 Vf 1.1 V 10 A 1 mA -55 to +150 C Max. Forward Voltage Drop Per Bridge Element at 2 A Peak Max. Reverse Current at Rated DC Blocking Voltage Per Element Max. Reverse Current at Rated DC Blocking Voltage Per Element at Tj = 100C Operating Temperature Range V A Ir Tj Storage Temperature Range Units Tstg Rating and Characteristic Curves: Typical Forward Characteristics Instantaneous Forward Current Amperes Average Forward Output Current Amperes Derating Curve Output Rectified Current Ambient Temperature C Instantaneous Forward Voltage, Volts www.element14.com www.farnell.com www.newark.com Page <1> 22/09/15 V1.0 Bridge Rectifier Max. Forward Surge Current Instantaneous Reverse Current, Microamperes Peak Forward Surge Current Amperes Typical Reverse Characteristics Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage KBP Part Number Table Dimensions : Inches (Millimetres) Description Part Number Bridge Rectifier KBP2005G Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 22/09/15 V1.0