S1A - S1M CREAT BY ART 1.0AMP Surface Mount Rectifiers SMA/DO-214AC Features For surface mounted application Glass passivated chip junction Low forward voltage drop High current capability Easy pick and place High surge current capability Plastic material used carries Underwriters Laboratory Classification 94V-0 Meet MSL level 1, per J-STD-020D, lead free maximum peak of 260 High temperature soldering: 260/10 seconds at terminals Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: Molded plastic Terminal: Pure tin plated, lead free solderable per J-STD-002B and JESD22-B102D Polarity: Indicated by cathode band Packing: 12mm tape per EIA STD RS-481 Weight: 0.064 grams Ordering Information (example) Part No. Package Packing Packing code Packing code (Green) S1A SMA 1.8K / 7" REEL R3 R3G Maximum Ratings and Electrical Characteristics Rating at 25 ambient temperature unless otherwise specified. Parameter Symbol S1A S1B S1D S1G S1J S1K S1M Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current IF(AV) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM Maximum Instantaneous Forward Voltage (Note 1) @1A Maximum Reverse Current @ Rated VR TA=25 TA=125 1 A 40 VF 30 A 1.1 V 1 IR uA 50 Typical Reverse Recovery Time (Note 2) Trr 1.5 uS Typical Junction Capacitance (Note 3) Cj 12 pF Non-Repetitive Peak Reverse Avalanche Energy at 25, IAS=1A, L=10mH ERSM 5 mJ Typical Thermal Resistance RjA RjL Operating Temperature Range Storage Temperature Range 75 27 85 30 O C/W TJ - 55 to + 175 O C TSTG - 55 to + 175 O C Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:L13 RATINGS AND CHARACTERISTIC CURVES (S1A THRU S1M) FIG.1 FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT (A) 1.2 FIG. 2 TYPICAL REVERSE CHARACTERISTICS 100 0.8 0.6 0.4 RESISTIVE OR INDUCTIVE LOAD 0.2 0 0 25 50 75 100 125 150 175 FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 8.3mS Single Half Sine Wave JEDEC Method TA=125 1 0.1 TA=75 0.01 TA=25 0.001 0 S1A-S1K 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 10 FIG. 5 TYPICAL FORWARD CHARACTERISTICS S1M 100 TA=25 1 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 4 TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE (pF) 10 10 TA=25 f=1.0MHz 1 0.01 0.1 1 REVERSE VOLTAGE (V) 10 100 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE URRENT (A) LEAD TEMPERATURE (oC) INSTANTANEOUS REVERSE CURRENT (uA) 1 10 1 TA=25 Pulse Width=300us 1% Duty Cycle 0.1 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 FORWARD VOLTAGE (V) Version:L13 2 Ordering information Packing code Packing code (Green) 1.8K / 7" REEL R3 R3G SMA 7.5K / 13" REEL R2 R2G SMA 7.5K / 13" Plastic REEL M2 M2G Folded SMA 1.8K / 7" REEL F3 F3G Folded SMA 7.5K / 13" REEL F2 F2G F4 F4G 1.8K / 7" REEL E3 E3G 7.5K / 13" REEL C SMA Note: "x" is Device Code from "A" thru "M". E2 E2G Part No. S1x (Note) Package Packing SMA Folded SMA 7.5K / 13" Plastic REEL C SMA Tape & Reel specification Reel Size Tape Size 7" 12mm Reel Size Tape Size 13" 12mm A 2.0 178 A max 330 B 0.4 1.9 B 0.5 2 C +0.5;-0.2 13 C 0.5 13 D min 21 D min 20.2 N 1.0 62 N 0.5 75 G +0.8;-0 12.2 G +2.0;-0 12.4 T max 14.6 T max 18.4 Unit (mm) Suggested PAD Layout Symbol A B C D E Unit(mm) 1.78 1.51 3.92 2.41 4.43 Package Outline Dimensions DIM. Marking Diagram P/N = Specific Device Code G= Green Compound YW = Date Code Unit(mm) Unit(inch) Min Max Min Max A 1.27 1.58 0.050 0.062 B 2.29 2.83 0.090 0.111 C 4.06 4.60 0.160 0.181 D 1.99 2.50 0.078 0.098 E 0.90 1.41 0.035 0.056 F 0.15 0.31 0.006 0.012 G 0.10 0.20 0.004 0.008 H 4.95 5.33 0.195 0.210