Short Barrel Inductive Prox E2E 2-Wire DC Reduce Wiring to Control Devices with Short-Barrel 2-Wire DC Prox Sensors Thick nickel-plated brass barrel has wrench flats for easy installation Solid potted internal circuitry withstands shocks and water washdown to IP67 High visibility indicator Choose prewired or connector models Ordering Information (Shaded models are normally stocked.) Prewired Sensors Self-diagnostic output function Type Shielded Size M12 Sensing distance 3 mm M18 Yes Unshielded 7 mm Unshielded E2E-X3D1S -- E2E-X7D1S -- 10 mm E2E-X10D1S -- M12 8 mm E2E-X8MD1S -- E2E-X14MD1S -- E2E-X20MD1S -- 14 mm M30 No NC M30 M18 Shielded Model NO (Note 1, 2) 20 mm M8 2 mm E2E-X2D1-N E2E-X2D2-N M12 3 mm E2E-X3D1-N E2E-X3D2-N M18 7 mm E2E-X7D1-N E2E-X7D2-N M30 10 mm E2E-X10D1-N E2E-X10D2-N E2E-X4MD1 E2E-X4MD2 E2E-X8MD1 E2E-X8MD2 E2E-X14MD1 E2E-X14MD2 E2E-X20MD1 E2E-X20MD2 M8 M12 M18 M30 4 mm 8 mm 14 mm 20 mm Note: 1 . A different oscillating frequency is available. Add a "5" to the part number (e.g., E2E-X3D15-N). 2 . E2E sensors with robotic cable are available. Add a "-R" in the part number (e.g., E2E-X3D1-R). F-2 For more Information: U.S. www.sensors.omron.com Canada www.sensors.omron.ca Sensors With Built-in Connector Self-diagConnector nostic output Type size function Shielded Yes Unshielded M12 Sensing distance 3 mm Unshielded E2E-X3D1S-M1 --- E2E-X7D1S-M1 --- M30 10 mm E2E-X10D1S-M1 --- M12 8 mm E2E-X8MD1S-M1 --- 20 mm M8 2 mm M12 3 mm 7 mm M30 10 mm E2E-X3D1-M1G (See Note 1.) E2E-X7D1-M1G (See Note 1.) E2E-X10D1-M1G (See Note 1.) E2E-X4MD1-M1G 4 mm 8 mm M18 E2E-X20MD1S-M1 --E2E-X2D1-M1G M18 M8 E2E-X14MD1S-M1 --- 14 mm M12 No NC (Pins 1 and 2) 7 mm M30 Shielded NO (Pins 1 and 4) M18 M18 M12/Micro Change(R) M12/Micro Change(R) Model Size 14 mm M30 20 mm E2E-X2D2-M1G E2E-X3D2-M1G E2E-X7D2-M1G E2E-X10D2-M1G E2E-X4MD2-M1G E2E-X8MD1-M1G E2E-X8MD2-M1G (See Note 1.) E2E-X14MD1-M1G E2E-X14MD2-M1G (See Note 1.) E2E-X20MD1-M1G E2E-X20MD2-M1G (See Note 1.) Shielded 2 mm M8/Nano Change(R) Unshielded E2E-X2D1-M3G E2E-X2D2-M3G E2E-X4MD1-M3G E2E-X4MD2-M3G M8 4 mm Note: 1 . A different oscillating frequency is available. Add a "5" to the part number (e.g., E2E-X3D15-N). 2 . E2E sensors with a "G" in the part number denotes alternate pin arrangement. Refer to the Connections section. 3 . Connector cordsets: For MicroChange(R) use OMRON Y96E-44@D@; for NanoChange(R) use Omron XS3F-M42@-40@-R. For more Information: U.S. www.sensors.omron.com Canada www.sensors.omron.ca F-3 Sensor With Pigtail Connector Type Size M12 Shielded Unshielded Sensing distance 3 mm M18 7 mm M30 10 mm M12 8 mm M18 Polarity Model NO Yes No Yes No Yes No E2E-X3D1-M1GJ E2E-X3D1-M1J-T E2E-X7D1-M1GJ E2E-X7D1-M1J-T E2E-X10D1-M1GJ E2E-X10D1-M1J-T E2E-X8MD1-M1GJ Yes 14 mm M30 E2E-X14MD1-M1GJ E2E-X20MD1-M1GJ 20 mm Note: 1 . A model with no polarity has a residual voltage of 5 V, which must be taken into consideration together with the interface condition (the PLC's ON voltage, for example) when connecting the proximity sensor to a load. 2 . Connector cordsets: Use OMRON Y96E-44@D@. Sensor With Four-Pin Connector Type Size Sensing distance Model NO (Pins 3 and 4) NC (Pins 2 and 3) M8 2 mm E2E-X2D1-M1 E2E-X2D2-M1 M12 3 mm E2E-X3D1-M1 E2E-X3D2-M1 E2E-X7D1-M1 E2E-X7D2-M1 E2E-X10D1-M1 E2E-X10D2-M1 E2E-X4MD1-M1 E2E-X4MD2-M1 E2E-X8MD1-M1 E2E-X8MD2-M1 E2E-X14MD1-M1 E2E-X14MD2-M1 E2E-X20MD1-M1 E2E-X20MD2-M1 Shielded M18 7 mm M30 M8 M12 10 mm 4 mm 8 mm Unshielded M18 14 mm M30 20 mm Accessories Description Mounting brackets Silicone rubber covers for shielded sensors Connector cordsets Model Fits M8 size sensors Y92E-B8 Y92E-B12 Fits M12 size sensors Y92E-B18 Fits M18 size sensors Y92E-B30 Fits M30 size sensors Fits M12 size sensors Y92E-E12-2 Y92E-E18-2 Fits M18 size sensors Y92E-E30-2 Fits M30 size sensors See Y96E and XS Connector Cordsets data sheets for details Note: Use OMRON Y96E-44@D@ cordsets with M12 connector; use XS3F cordsets with M8 connector. F-4 For more Information: U.S. www.sensors.omron.com Canada www.sensors.omron.ca Replacement Parts Description Mounting hardware including one pair of metal nuts and one washer Model M8-MHWS M12-MHWS M18-MHWS M30-MHWS Fits M8 size sensors Fits M12 size sensors Fits M18 size sensors Fits M30 size sensors Specifications Ratings/Characteristics Model Size Type E2E-X2D@ Sensing distance Supply voltage (operating voltage) Leakage current Sensing object Setting distance Standard object (mild steel) Differential travel Response frequency Operation (with target object approaching) Control output (switching capacity) Diagnostic output delay Circuit protection Indicator Enclosure rating Material IEC NEMA Body Sensing face M8 Shielded 2 mm (0.08 in) 10% E2E-X4MD@ E2E-X3D@ Unshielded 4 mm (0.16 in) 10% M12 Shielded 3 mm (0.12 in) 10% E2E-X8MD@ E2E-X7D@ Unshielded 8 mm (0.31 in) 10% M18 Shielded 7 mm (0.28 in) 10% E2E-X14MD@ E2E-X10D@ E2E-X20MD@ Unshielded 14 mm (0.55 in) 10% M30 Shielded 10 mm (0.39 in) 10% Unshielded 20 mm (0.79 in) 10% 0.8 mA max. Magnetic metals (refer to Engineering Data for non-magnetic metals) 0 to 1.6 mm 0 to 3.2 mm 0 to 2.4 mm 0 to 6.4 mm 0 to 5.6 mm (0 to 0.06 in) (0 to 0.13 in) (0 to 0.09 in) (0 to 0.25 in) (0 to 0.22 in) 20 x 20 x 12 x 12 x 30 x 30 x 18 x 18 x 8 x 8 x 1 mm 1 mm 1 mm 1 mm 1 mm (0.31 x 0.31 (0.79 x 0.79 x (0.47 x 0.47 (1.18 x 1.18 x (0.71 x 0.71 x 0.04 in) 0.04 in) x 0.04 in) 0.04 in) x 0.04 in) 15% max. of sensing 10% max. of sensing distance distance 0 to 11.2 mm (0 to 0.44 in) 30 x 30 x 1 mm (1.18 x 1.18 x 0.04 in) 0 to 8.0 mm (0 to 0.31 in) 30 x 30 x 1 mm (1.18 x 1.18 x 0.04 in) 0 to 16.0 mm (0 to 0.63 in) 54 x 54 x 1 mm (2.13 x 2.13 x 0.04 in) 1.5 kHz 0.4 kHz 0.4 kHz 0.1 kHz 12 to 24 VDC, ripple (p-p): 10% max., (10 to 30 VDC) 1.0 kHz 1.0 kHz 0.8 kHz 0.5 kHz D1 models: Load ON D2 models: Load OFF 3 to 100 mA (5 to 100 mA with residual voltage of 5V for -M1J-T models) Diagnostic output: 50 mA for -D1S models 0.3 to 1 s Surge absorber, load short-circuit protection (for control and diagnostic output) D1 models: Operation indicator (red LED), operation set indicator (green LED) D2 models: Operation indicator (red LED) IP67 1, 4, 6, 12, 13 Stainless steel Brass PBT For more Information: U.S. www.sensors.omron.com Canada www.sensors.omron.ca F-5 Operation Output Circuits E2E-X@D@ DC 2-wire Models E2E-X@D@ Without Diagnostic Output E2E-X@D1-M1J-T No Polarity E2E-X@D1S Without Diagnostic Output Note: 1 . The load can be connected to either the +V or 0-V side. 2 . The E2E-X@D1-M1J-T has no polarity. Therefore, terminals 3 and 4 have no polarity. Dimensions Unit: mm (inch) Prewired Models (Shielded) Prewired Models (Unshielded) Fig. 1: E2E-X2D@ Fig. 2: E2E-X4MD@ Fig. 3: E2E-X3D@ Fig. 4: E2E-X8MD@ F-6 For more Information: U.S. www.sensors.omron.com Canada www.sensors.omron.ca Unit: mm (inch) Prewired Models (Shielded) Prewired Models (Unshielded) Fig. 5: E2E-X7D@ Fig. 6: E2E-X14MD@ Fig. 7: E2E-X10D@ Fig. 8: E2E-X20MD@ Connector Models (Shielded) Connector Models (Unshielded) Fig. 9: E2E-X2D@-M1G Fig. 10: E2E-X4MD@-M1G Fig. 11: E2E-X3D@-M1G Fig. 12: E2E-X8MD@-M1G Fig. 13: E2E-X7D@-M1G Fig. 14: E2E-X14MD@-M1G For more Information: U.S. www.sensors.omron.com Canada www.sensors.omron.ca F-7 Unit: mm (inch) Fig. 15: E2E-X10D@-M1G Fig. 16: E2E-X20MD@-M1G M8 Connector Models (Shielded) M8 Connector Models (Unshielded) Fig. 17: Fig. 18: F-8 E2E-X2D@-M3G For more Information: U.S. www.sensors.omron.com E2E-X4MD@-M3G Canada www.sensors.omron.ca Connection Pin Arrangements E2E-X@D@-M@ DC 2-wire Models SelfdiagConnector nostic output Output conApplicable models figuration Pin arrangement E2E-X@D1-M1G@ (See Note.) Note: Terminals 2 and 3 are not used. NO E2E-X@D1-M1J-T Note: 1 . Terminals 1 and 2 are not used. 2 . Terminals 3 and 4 have no polarity. E2E-X@D1-M1 No Note: Terminals 1 and 2 are not used. M12 Micro Change(R) E2E-X@D2-M1G (See Note.) Note: Terminals 3 and 4 are not used. NC E2E-X@D2-M1 Note: Terminals 1 and 4 are not used. Yes NO E2E-X@D1S-M1 Note: Terminals 1 is not used. NO E2E-X@D1-M3G Note: Terminals 2 and 3 are not used. M8 Nano Change(R) No NC E2E-X@D2-M3G Note: Terminals 3 and 4 are not used. Note: Pin arrangements conform to IEC standards. For more Information: U.S. www.sensors.omron.com Canada www.sensors.omron.ca F-9 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ("Omron"). Omron objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron's payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in "break down" situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://oeweb.omron.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to "forbidden" or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, "including" means "including without limitation"; and "Omron Companies" (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at www.omron.com/oei - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONICS LLC 1 Commerce Drive Schaumburg, IL 60173 Tel: 847.843.7900 For U.S. technical support or other inquiries: 800.556.6766 OMRON CANADA, INC. 885 Milner Avenue Toronto, Ontario M1B 5V8 Tel: 416.286.6465 MEXICO SALES OFFICES Mexico, D.F. 555.660.3144 Ciudad Juarez 656.623.7083 Monterrey, N.L. 818.377.4281 Queretaro 442.135.4510 BRAZIL SALES OFFICE Sao Paulo 55.11.2101.6310 ARGENTINA SALES OFFICE Cono Sur 54.114.787.1129 CHILE SALES OFFICE Santiago 562.206.4592 OMRON ON-LINE Global www.omron.com USA www.omron.com/oei Canada www.omron.ca Brazil www.omron.com.br Latin America www.espanol.omron.com OTHER LATIN AMERICAN SALES Florida 954.227.2121 Cat. No. X301-E3-01 1/04 Specifications subject to change without notice Printed in USA