©2006 Fairchild Semiconductor Corporation 1www.fairchildsemi.com
ES3A - ES3J Rev. F
ES3A - ES3J Fast Rectifiers
December 2006
ES3A - ES3J
Fast Rectifiers
Features
• For surface mount applications.
• Glass passivated junction.
• Low profile package.
• Easy pick and place.
• Built-in strain relief.
• Superfast recovery times for high efficiency.
Absolute Maximum Ratings * Ta = 25°C unless otherwise noted
* These ratings are limiting values above which the serviceability of any semiconductor device may by impaired.
Thermal Characteristics
* Device mounted on FR-4 PCB 0.013 mm.
Electrical Characteristics TC = 25°C unless otherwise noted
Symbol Parameter Value Units
ES3A ES3B ES3C ES3D ES3J
VRRM Maximum Repetitive Reverse Voltage 50 100 150 200 600 V
IF(AV) Average Rectified Forward Current ,
.375” lead length @ TA=75°C 3.0 A
IFSM Non-repetitive Peak Forward Surge Current
8.3 ms Single Half-Sine-Wave 100 A
TJ, TSTG Operating Junction and S torage Temperature Range -50 to +150 °C
PDPower Dissipation 1.66 W
Symbol Parameter Value Units
RθJA Thermal Resistance, Junction to Ambient * 47 °C/W
RθJL Thermal Resistance, Junction to Lead * 12 °C/W
Symbol Parameter Value Units
VFForward Voltage @ IF = 3.0 A 0.95 1.7 V
Trr Reverse Recovery Time
IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A 20 35 ns
IRReverse Current @ rated VR TA = 25°C
TA = 100°C10
500 uA
CTTotal Capacitance
VR = 4.0 V, f = 1.0 MHz 45 pF
Color Band Denotes Cathode
SMB(DO-214AC)
2www.fairchildsemi.com
ES3A - ES3J Rev. F
ES3A - ES3J Fast Rectifiers
Typical Performance Characteristics
Figure 1. Foward Current Deration Curve Figure 2. Foward Voltage Characteristics
Figure 3. Total Capacitance Figure 4. Reverse Current vs Reverse Voltage
0.01
0.1
1
10
100
0.40.60.81.01.21.41.61.8
ES3A-ES3D
ES3J
TA=25 oC
Pulse Width = 300us
2% Duty Cycle
Forward Voltage Drop, VF[V]
Forward Current, IF[A]
Pulse
Generator
(Note 2)
50
Ω
NONINDUCTIVE 50
Ω
NONINDUCTIVE
DUT
(-)
(+)
OSCILLOSCOPE
(Note 1)
50
Ω
NONINDUCTIVE
50V
(approx)
1. Rise time = 7.0 ns max; Input impedance = 1.0 megaoh m 22 pf.
2. Rise time = 10 ns max; Source impedance = 50 ohms.
NOTES:
1.0cm SET TIME BASE FOR
tr r
+0.5A
0
-0.25A
-1.0A
5/ 10 ns/ cm
3www.fairchildsemi.com
ES3A - ES3J Rev. F
ES3A - ES3J Fast Rectifiers
Package Dimensions
0LQLPXP5HFRPPHQGHG
/DQG3DWWHUQ
Dimensions in Inches(Millimeters)
SMC / DO - 214AB
FAIRCHILD SEMICONDUCTOR TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to
be an exhaustive list of all such trademarks.
ES3A - ES3J Fast Rectifiers
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO
IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE
OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE
RIGHTS OF OTHERS. THESE SPECIFI CATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPE-
CIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEV ICES OR SYSTEMS W ITHOUT
THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant int o the body, or (b) support or sustain life , or
(c) whose failure to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected
to result in significant injury to the user.
2. A critical compone nt is any component of a life support device or system
whose failure to perform can be reasonably expected to cause the failu re
of the life support device or system, or t o affect it s safety or ef fectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In Design This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary First Production This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete Not In Production This datasheet contai ns specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
FACT Quiet Series™
GlobalOptoisolator™
GTO™
HiSeC™
I2C™
i-Lo™
ImpliedDisconnect™
IntelliMAX™
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
PowerSaver™
PowerTrench®
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
ScalarPump™
SILENT SWITCHER®
SMART START™
SPM™
Stealth™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TCM™
TinyBoost™
TinyBuck™
TinyPWM™
TinyPower™
TinyLogic®
TINYOPTO™
TruTranslation™
UHC®
UniFET™
VCX™
Wire™
ACEx™
ActiveArray™
Bottomless™
Build it Now™
CoolFET™
CROSSVOLT™
DOME™
EcoSPARK™
E2CMOS™
EnSigna™
FACT®
FAST®
FASTr™
FPS™
FRFET™
Across the board. Around the world.™
The Power Franchise®
Programmable Active Droop™
Rev. I22
4www.fairchildsemi.com
ES3A - ES3J Rev. F
ES3A - ES3J Fast Rectifiers
