DS91C180, DS91D180 www.ti.com SNLS158M - MARCH 2006 - REVISED APRIL 2013 DS91D180/DS91C180 100 MHz M-LVDS Line Driver/Receiver Pair Check for Samples: DS91C180, DS91D180 FEATURES DESCRIPTION * The DS91D180 and DS91C180 are 100 MHz MLVDS (Multipoint Low Voltage Differential Signaling) line driver/receiver pairs designed for applications that utilize multipoint networks (e.g. clock distribution in ATCA and uTCA based systems). M-LVDS is a bus interface standard (TIA/EIA-899) optimized for multidrop networks. Controlled edge rates, tight input receiver thresholds and increased drive strength are sone of the key enhancments that make M-LVDS devices an ideal choice for distributing signals via multipoint networks. 1 2 * * * * * * * DC to 100+ MHz / 200+ Mbps Low Power, Low EMI Operation Optimal for ATCA, uTCA Clock Distribution Networks Meets or Exceeds TIA/EIA-899 M-LVDS Standard Wide Input Common Mode Voltage for Increased Noise Immunity DS91D180 has Type 1 Receiver Input DS91C180 has Type 2 Receiver Input for FailSafe Functionality Industrial Temperature Range Space Saving SOIC-14 Package (JEDEC MS012) The DS91D180/DS91C180 driver input accepts LVTTL/LVCMOS signals and converts them to differential M-LVDS signal levels. The DS91D180/DS91C180 receiver accepts low voltage differential signals (LVDS, B-LVDS, M-LVDS, LVPECL and CML) and converts them to 3V LVCMOS signals. The DS91D180 device has a M-LVDS type 1 receiver input with no offset.The DS91C180 device has a type 2 receiver input which enable failsafe functionality. Typical Application in an ATCA Clock Distribution Network Slot Card N Slot Card N+1 MLVDS Drivers/Receivers MLVDS Drivers/Receivers 80W RT CLK1A (8 KHz) 80W RT 80W RT CLK1B (8 KHz) 80W RT 80W RT CLK2A (19.44 MHz) 80W RT 80W RT CLK2B (19.44 MHz) 80W RT 80W RT CLK3A (User Defined up to 100 MHz) 80W RT 80W RT CLK3B (User Defined up to 100 MHz) 80W RT ATCA Backplane 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2006-2013, Texas Instruments Incorporated DS91C180, DS91D180 SNLS158M - MARCH 2006 - REVISED APRIL 2013 www.ti.com Figure 1. Connection Diagram Top View See Package Number D0014A Logic Diagram M-LVDS Receiver Types The EIA/TIA-899 M-LVDS standard specifies two different types of receiver input stages. A type 1 receiver has a conventional threshold that is centered at the midpoint of the input amplitude, VID/2. A type 2 receiver has a built in offset that is 100mV greater than VID/2. The type 2 receiver offset acts as a failsafe circuit where open or short circuits at the input will always result in the output stage being driven to a low logic state. xxx x xx xxx Type 1 High Type 2 2.4 V High 150 mV VID Low 50 mV 0V -50 mV Low -2.4 V Transition Region Figure 2. M-LVDS Receiver Input Thresholds These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 2 Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 DS91C180, DS91D180 www.ti.com SNLS158M - MARCH 2006 - REVISED APRIL 2013 Absolute Maximum Ratings (1) (2) -0.3V to +4V Supply Voltage, VCC Control Input Voltages -0.3V to (VCC + 0.3V) Driver Input Voltage -0.3V to (VCC + 0.3V) -1.8V to +4.1V Driver Output Voltages Receiver Input Voltages -1.8V to +4.1V Receiver Output Voltage -0.3V to (VCC + 0.3V) Maximum Package Power Dissipation at +25C SOIC Package 1.1 W Thermal Resistance (4-Layer, 2 oz. Cu, JEDEC) JA 113.7 C/W JC 36.9 C/W Derate SOIC Package 8.8 mW/C above +25C Maximum Junction Temperature 150C -65C to +150C Storage Temperature Range Lead Temperature (Soldering, 4 seconds) 260C ESD Ratings: 5 kV (HBM 1.5k, 100pF) 250 V (EIAJ 0, 200pF) 1000 V (CDM 0, 0pF) (1) "Absolute Maximum Ratings" are those beyond which the safety of the device cannot be ensured. They are not meant to imply that the device should be operated at these limits. The tables of "Electrical Characteristics" provide conditions for actual device operation. If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications. (2) Recommended Operating Conditions Min Typ Max Units Supply Voltage, VCC 3.0 3.3 3.6 V Voltage at Any Bus Terminal (Separate or Common-Mode) -1.4 +3.8 V 2.4 V High Level Input Voltage VIH 2.0 VCC V Low Level Input Voltage VIL 0 0.8 V +85 C Differential Input Voltage VID -40 Operating Free Air Temperature TA +25 Electrical Characteristics Over recommended operating supply and temperature ranges unless otherwise specified. Symbol Parameter Conditions (1) (2) (3) (4) Min Typ Max Units 650 mV M-LVDS Driver |VYZ| Differential output voltage magnitude VYZ Change in differential output voltage magnitude between logic states VOS(SS) Steady-state common-mode output voltage |VOS(SS)| Change in steady-state common-mode output voltage between logic states VOS(PP) Peak-to-peak common-mode output voltage (VOS(pp) @ 500KHz clock) VY(OC) Maximum steady-state open-circuit output voltage Figure 6 VZ(OC) Maximum steady-state open-circuit output voltage VP(H) Voltage overshoot, low-to-high level output VP(L) Voltage overshoot, high-to-low level output IIH High-level input current (LVTTL inputs) (1) (2) (3) (4) (5) RL = 50, CL = 5pF Figure 3 and Figure 5 RL = 50, CL = 5pF Figure 3 and Figure 4 480 -50 0 +50 mV 0.3 1.8 2.1 V +50 mV 0 RL = 50, CL = 5pF, CD = 0.5pF Figure 8 and Figure 9 (5) VIH = 2.0V 143 mV 0 2.4 V 0 2.4 V 1.2VSS V -0.2VSS -15 V 15 A All currents into device pins are positive; all currents out of device pins are negative. All voltages are referenced to device ground unless otherwise specified. All typicals are given for VCC = 3.3V and TA = 25C. The algebraic convention, in which the least positive (most negative) limit is designated as minimum, is used in this datasheet. CL includes fixture capacitance and CD includes probe capacitance. Not production tested. Ensured by a statistical analysis on a sample basis at the time of characterization. Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 Submit Documentation Feedback 3 DS91C180, DS91D180 SNLS158M - MARCH 2006 - REVISED APRIL 2013 www.ti.com Electrical Characteristics (continued) Over recommended operating supply and temperature ranges unless otherwise specified. (1)(2)(3)(4) Symbol Parameter Conditions Min IIL Low-level input current (LVTTL inputs) VIL = 0.8V -15 VIKL Input Clamp Voltage (LVTTL inputs) IIN = -18 mA -1.5 IOS Differential short-circuit output current Figure 7 -43 Typ Max Units 15 A 43 mA V M-LVDS Receiver VIT+ Positive-going differential input voltage threshold See Function Tables Type 1 20 50 mV Type 2 94 150 mV Type 1 -50 VIT- Negative-going differential input voltage threshold See Function Tables VOH High-level output voltage IOH = -8mA VOL Low-level output voltage IOL = 8mA IOZ TRI-STATE output current VO = 0V or 3.6V -10 IOSR Short circuit Rrceiver output current (LVTTL Output) VO = 0V -90 Type 2 20 mV 50 94 mV 2.4 2.7 0.28 V 0.4 10 -48 V A mA M-LVDS Bus (Input and Output) Pins IA, IY Receiver input or driver high-impedance output current IB, IZ Receiver input or driver high-impedance output current VA,Y = 3.8V, VB,Z = 1.2V, DE = GND VA,Y = 0V or 2.4V, VB,Z = 1.2V, DE = GND -20 VA,Y = -1.4V, VB,Z = 1.2V, DE = GND -32 -20 VB,Z = -1.4V, VA,Y = 1.2V, DE = GND -32 -4 IAB, IYZ Receiver input or driver high-impedance output differential current (IA - IB or IY - IZ) VA,Y = VB,Z, -1.4V V 3.8V, DE = GND IA(OFF), IY(OFF) Receiver input or driver high-impedance output power-off current VA,Y = 3.8V, VB,Z = 1.2V, DE = 0V 0V VCC 1.5V IB(OFF), IZ(OFF) Receiver input or driver high-impedance output power-off current VA,Y = 0V or 2.4V, VB,Z = 1.2V, DE = 0V 0V VCC 1.5V -20 VA,Y = -1.4V, VB,Z = 1.2V, DE = 0V 0V VCC 1.5V -32 -20 VB,Z = -1.4V, VA,Y = 1.2V, DE = 0V 0V VCC 1.5V -32 -4 +20 A 32 A +20 A A +4 A 32 A +20 A A VB,Z = 3.8V, VA,Y = 1.2V, DE = 0V 0V VCC 1.5V VB,Z = 0V or 2.4V, VA,Y = 1.2V, DE = 0V 0V VCC 1.5V A A VB,Z = 3.8V, VA,Y = 1.2V, DE = GND VB,Z = 0V or 2.4V, VA,Y = 1.2V, DE = GND 32 32 A +20 A A IAB(OFF), IYZ(OFF) Receiver input or driver high-impedance output power-off differential current (IA(OFF) - IB(OFF) or IY(OFF) - IZ(OFF)) VA,Y = VB,Z, -1.4V V 3.8V, DE = 0V 0V VCC 1.5V CA, CB Receiver input capacitance VCC = OPEN 5.1 pF CY, CZ Driver output capacitance 8.5 pF CAB Receiver input differential capacitance 2.5 pF CYZ Driver output differential capacitance 5.5 pF 4 Submit Documentation Feedback +4 A Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 DS91C180, DS91D180 www.ti.com SNLS158M - MARCH 2006 - REVISED APRIL 2013 Electrical Characteristics (continued) Over recommended operating supply and temperature ranges unless otherwise specified. (1)(2)(3)(4) Symbol CA/B, CY/Z Parameter Conditions Min Receiver input or driver output capacitance balance (CA/CB or CY/CZ) Typ Max Units 29.5 mA 1.0 SUPPLY CURRENT (VCC) ICCD Driver Supply Current RL = 50, DE = VCC, RE = VCC 17 ICCZ TRI-STATE Supply Current DE = GND, RE = VCC 7 9.0 mA ICCR Receiver Supply Current DE = GND, RE = GND 14 18.5 mA ICCB Supply Current, Driver and Receiver Enabled DE = VCC, RE = GND 20 29.5 mA Min Typ Max Units 3.4 5.5 ns 3.1 5.5 ns 300 420 ps 1.9 ns Switching Characteristics Over recommended operating supply and temperature ranges unless otherwise specified. Symbol Parameter Conditions (1) (2) DRIVER AC SPECIFICATION tPLH Differential Propagation Delay Low to High RL = 50, CL = 5 pF, 1.0 tPHL Differential Propagation Delay High to Low CD = 0.5 pF 1.0 tSKD1 (tsk(p)) Pulse Skew |tPLHD - tPHLD| tSKD3 Part-to-Part Skew (3) (4) Figure 8 and Figure 9 (5) (4) (4) tTLH (tr) Rise Time tTHL (tf) Fall Time 1.0 1.8 3.0 ns 1.0 1.8 3.0 tPZH Enable Time (Z to Active High) ns RL = 50, CL = 5 pF, 8 ns tPZL tPLZ Enable Time (Z to Active Low ) CD = 0.5 pF 8 ns Disable Time (Active Low to Z) Figure 10 and Figure 11 8 tPHZ Disable Time (Active High to Z) ns tJIT Random Jitter, RJ fMAX Maximum Data Rate (4) (4) 100MHz clock pattern (6) 2.5 8 ns 5.5 psrms 200 Mbps RECEIVER AC SPECIFICATION tPLH Propagation Delay Low to High CL = 15 pF 2.0 4.7 7.5 ns tPHL Propagation Delay High to Low Figure 12 Figure 13 and Figure 14 2.0 5.3 7.5 ns tSKD1 (tsk(p)) Pulse Skew |tPLHD - tPHLD| (3) (4) 0.6 1.9 ns tSKD3 Part-to-Part Skew 1.5 ns (5) (4) (4) tTLH (tr) Rise Time tTHL (tf) Fall Time (4) tPZH Enable Time (Z to Active High) tPZL Enable Time (Z to Active Low) tPLZ tPHZ fMAX Maximum Data Rate (1) (2) (3) (4) (5) (6) 0.5 1.2 3.0 ns 0.5 1.2 3.0 ns RL = 500, CL = 15 pF 10 ns Figure 15 and Figure 16 10 ns Disable Time (Active Low to Z) 10 ns Disable Time (Active High to Z) 10 200 ns Mbps All typicals are given for V = 3.3V and TA = 25C. CL includes fixture capacitance and CD includes probe capacitance. tSKD1, |tPLHD - tPHLD|, is the magnitude difference in differential propagation delay time between the positive going edge and the negative going edge of the same channel. Not production tested. Ensured by a statistical analysis on a sample basis at the time of characterization. tSKD3, Part-to-Part Skew, is defined as the difference between the minimum and maximum specified differential propagation delays. This specification applies to devices at the same VCC and within 5C of each other within the operating temperature range. Stimulus and fixture jitter has been subtracted. Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 Submit Documentation Feedback 5 DS91C180, DS91D180 SNLS158M - MARCH 2006 - REVISED APRIL 2013 www.ti.com Test Circuits and Waveforms Figure 3. Differential Driver Test Circuit A ~ 2.1V B ~ 1.5V 'VOS(SS) VOS VOS(PP) Figure 4. Differential Driver Waveforms Figure 5. Differential Driver Full Load Test Circuit Figure 6. Differential Driver DC Open Test Circuit 6 Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 DS91C180, DS91D180 www.ti.com SNLS158M - MARCH 2006 - REVISED APRIL 2013 Figure 7. Differential Driver Short-Circuit Test Circuit Figure 8. Driver Propagation Delay and Transition Time Test Circuit Figure 9. Driver Propagation Delays and Transition Time Waveforms Figure 10. Driver TRI-STATE Delay Test Circuit Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 Submit Documentation Feedback 7 DS91C180, DS91D180 SNLS158M - MARCH 2006 - REVISED APRIL 2013 www.ti.com Figure 11. Driver TRI-STATE Delay Waveforms Figure 12. Receiver Propagation Delay and Transition Time Test Circuit Figure 13. Type 1 Receiver Propagation Delay and Transition Time Waveforms 8 Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 DS91C180, DS91D180 www.ti.com SNLS158M - MARCH 2006 - REVISED APRIL 2013 Figure 14. Type 2 Receiver Propagation Delay and Transition Time Waveforms Figure 15. Receiver TRI-STATE Delay Test Circuit Figure 16. Receiver TRI-STATE Delay Waveforms Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 Submit Documentation Feedback 9 DS91C180, DS91D180 SNLS158M - MARCH 2006 - REVISED APRIL 2013 www.ti.com FUNCTION TABLES Table 1. DS91D180/DS91C180 Transmitting (1) Inputs (1) Outputs DE D Z Y 2.0V 2.0V 2.0V L H 0.8V H 0.8V L X Z Z X -- Don't care condition Z -- High impedance state Table 2. DS91D180 Receiving (1) Inputs (1) Output RE A-B R 0.8V +0.05V H 0.8V -0.05V L 0.8V 0V X 2.0V X Z X -- Don't care condition Z -- High impedance state Table 3. DS91C180 Receiving (1) Inputs (1) Output RE A-B R 0.8V +0.15V H 0.8V +0.05V L 0.8V 0V L 2.0V X Z X -- Don't care condition Z -- High impedance state Table 4. DS91D180 Receiver Input Threshold Test Voltages (1) Applied Voltages (1) 10 Resulting Differential Input Voltage Resulting Common-Mode Input Voltage Receiver Output VIA VIB VID VIC R 2.400V 0.000V 2.400V 1.200V H 0.000V 2.400V -2.400V 1.200V L 3.800V 3.750V 0.050V 3.775V H 3.750V 3.800V -0.050V 3.775V L -1.400V -1.350V -0.050V -1.375V H -1.350V -1.400V 0.050V -1.375V L H -- High Level L -- Low Level Output state assumes that the receiver is enabled (RE = L) Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 DS91C180, DS91D180 www.ti.com SNLS158M - MARCH 2006 - REVISED APRIL 2013 Table 5. DS91C180 Receiver Input Threshold Test Voltages (1) Applied Voltages (1) Resulting Differential Input Voltage Resulting Common-Mode Input Voltage Receiver Output VID VIC R H VIA VIB 2.400V 0.000V 2.400V 1.200V 0.000V 2.400V -2.400V 1.200V L 3.800V 3.650V 0.150V 3.725V H 3.800V 3.750V 0.050V 3.775V L -1.250V -1.400V 0.150V -1.325V H -1.350V -1.400V 0.050V -1.375V L H -- High Level L -- Low Level Output state assumes that the receiver is enabled (RE = L) PIN DESCRIPTIONS Pin No. Name 1, 8 NC Description 2 R 3 RE Receiver enable pin: When RE is high, the receiver is disabled. When RE is low or open, the receiver is enabled. 4 DE Driver enable pin: When DE is low, the driver is disabled. When DE is high, the driver is enabled. 5 D 6, 7 GND 9 Y Non-inverting driver output pin 10 Z Inverting driver output pin 11 B Inverting receiver input pin 12 A Non-inverting receiver input pin 13, 14 VCC Power supply pin, +3.3V 0.3V No connect. Receiver output pin Driver input pin Ground pin Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 Submit Documentation Feedback 11 DS91C180, DS91D180 SNLS158M - MARCH 2006 - REVISED APRIL 2013 www.ti.com REVISION HISTORY Changes from Revision L (April 2013) to Revision M * 12 Page Changed layout of National Data Sheet to TI format .......................................................................................................... 11 Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: DS91C180 DS91D180 PACKAGE OPTION ADDENDUM www.ti.com 26-Aug-2017 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) DS91C180TMA/NOPB ACTIVE SOIC D 14 55 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS91C180 TMA DS91C180TMAX/NOPB ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS91C180 TMA DS91D180TMA/NOPB ACTIVE SOIC D 14 55 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS91D180 TMA DS91D180TMAX/NOPB ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS91D180 TMA (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 26-Aug-2017 continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DS91C180TMAX/NOPB SOIC D 14 2500 330.0 16.4 6.5 9.35 2.3 8.0 16.0 Q1 DS91D180TMAX/NOPB SOIC D 14 2500 330.0 16.4 6.5 9.35 2.3 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS91C180TMAX/NOPB SOIC D 14 2500 367.0 367.0 35.0 DS91D180TMAX/NOPB SOIC D 14 2500 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI's published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, "Designers") understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers' applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI's provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, "TI Resources") are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer's company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI's provision of TI Resources does not expand or otherwise alter TI's applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED "AS IS" AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers' own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer's noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2017, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: DS91C180TMA/NOPB DS91C180TMAX/NOPB