* VDRT-480-24 Single Output DIN Rail Power Supply Features *High efficiency 89% and low dissipation *Protections:Short circuit/Over load/Over voltage/Over temperature *Cooling by free air convection *Built-in constant current limiting circuit *Can be installed on DIN rail TS-35/7.5 or 15 *UL 508(industrial control equipment)approved *EN61000-6-2(EN50082-2) industrial immunity level *100% full load burn-in test DC output voltage Output rated current Output current range Rated output power Ripple & noise Voltage adj. range Voltage tolerance Line regulation Load regulation Setup, rise, hold time Input voltage range Frequency range Efficiency AC current Inrush current Leakage current Overload protection Over voltage protection Over temp. protection Working temperature Working humidity Storage temp., humidity Temperature coefficient Vibration Safety standards Withstand voltage Isolation resistance EMI conduction & radiation Harmonic current EMS immunity MTBF Dimensions Weight Notes: 1. 2. 3. 4. 24V 20A 0~20A 480W 80mVp-p 24~28V 1.0% 0.5% 0.5% 1200ms, 40ms, 16ms/400VAC 800ms, 40ms, 35ms/500VAC at full load 340 ~ 550VAC 480 ~ 780VDC 47 ~ 63Hz 89% 1.7A/400VAC 1.3A/500VAC Cold start 50A <3.5mA / 530VAC 105 ~ 150% rated output power type : Constant current limiting, recovers automatically after fault condition is removed 30~36V Protection type : Shut down o/p voltage, re-power on to recover 110C 5C (TSW) Detect on heatsink of power switch Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -10 ~ +70C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85C , 10 ~ 95% RH 0.03%/C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL508, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC for 1 min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC min. Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A 91.1Khrs min. MIL-HDBK-217F (25C) 8.96x4.93x3.94 inches (227.5*125.2*100mm) 4.85 lbs (2.2Kg Kgs) All parameters are specified at 230VAC input, rated load, 25C 70% RH ambient Tolerance includes set up tolerance, line regulation, load regulation Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uF & 47 uF capacitor Dual phase operation; derating of 20% is required *V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer's applications using V-Infinity products other than repair or replacing (at V-I's option) V-Infinity products not meeting V-I's published specifications. Nothing will be covered outside of standard product warranty. V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258 * VDRT-480-24 Single Output DIN Rail Power Supply Dimensions (mm) Derating Curve Static Characteristics V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258