Document Number: 93585 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 23-Dec-08 1
Single Phase Rectifier Bridge, 3 A, 6 A
KBPC1, KBPC6 Series
Vishay High Power Products
FEATURES
• Suitable for printed circuit board or chassis
mounting
• Compact construction
• High surge current capability
• Compliant to RoHS directive 2002/95/EC
DESCRIPTION
The KBPC series of single phase rectifier bridge consists of
four silicon junctions connected as a full bridge. These
devices are intended for general use in industrial and
consumer equipment.
ELECTRICAL SPECIFICATIONS
PRODUCT SUMMARY
IO(AV) 3.0 A, 6.0 A
VRRM 50 V to 1000 V
D-72
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS KBPC1 KBPC6 UNITS
IO36A
IFSM
50 Hz 50 125 A
60 Hz 55 137
I2t50 Hz 12.5 78 A2s
60 Hz 11.4 71
VRRM Range 50 to 1000 V
TJ- 40 to 150 °C
VOLTAGE RATINGS
PART NUMBER
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
V
VRSM, MAXIMUM
NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
VRMS, MAXIMUM
RECOMMENDED RMS
SUPPLY VOLTAGE
V
KBPC1005 KBPC6005 50 50 20
KBPC102 KBPC602 200 200 80
KBPC104 KBPC604 400 400 125
KBPC106 KBPC606 600 600 250
KBPC108 KBPC608 800 800 380
KBPC110 KBPC610 1000 1000 500
www.vishay.com For technical questions, contact: indmodules@vishay.com Document Number: 93585
2Revision: 23-Dec-08
KBPC1, KBPC6 Series
Vishay High Power Products Single Phase Rectifier
Bridge, 3 A, 6 A
Fig. 1 - Case Temperature Ratings Fig. 2 - Case Temperature Ratings
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS KBPC1 KBPC6 UNITS
Maximum DC output current IO
TC = 50 °C, resistive or inductive load 3.0 6.0
A
TC = 50 °C, capacitive load 2.4 4.7
Maximum peak one cycle,
non-repetitive surge current IFSM
t = 10 ms, 20 ms Following any rated load
condition and with rated
VRRM reapplied
50 125
t = 8.3 ms, 16.7 ms 55 137
Maximum I2t capability for fusing I2t
t = 10 ms
Initial TJ = TJ maximum
100 % VRRM reapplied
12.5 78
A2s
t = 8.3 ms 11.4 71
t = 10 ms 17.7 110
t = 8.3 ms 16.1 1000
Maximum I2√t capability for fusing I2√t t = 0.1 ms to 10 ms, no voltage reapplied 177 1105 A2√s
Maximum peak forward voltage per diode VFM IFM = 0.5 x IO, TJ = 25 °C 1.1 1.2 V
Typical peak reverse leakage per diode IRM
TJ = 25 °C, 100 % VRRM 10 10 mA
TJ = 150 °C, 100 % VRRM 1.0 1.0
Operating frequency range f 40 to 1000 Hz
Maximum repetitive peak reverse
voltage range VRRM 50 to 1000 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL KBPC1 KBPC6 UNITS
Operating and storage temperature range TJ, TStg - 40 to 150 °C
Thermal resistance, junction to case RthJC --K/W
Approximate weight 56g
0.18 0.21 oz.
Average Output Current (A)
Maximum Allowable Case Temperature (°C)
0 20 60 14010040 80 120 160
0.0
0.5
4.0
2.5
2.0
1.5
1.0
3.0
3.5
93585_01
Resistive, inductive load
KBPC1...
Capacitive load
Average Output Current (A)
Maximum Allowable Case Temperature (°C)
0 20 60 14010040 80 120 160
0
1
2
8
6
5
4
3
7
93585_02
Resistive, inductive load
KBPC6...
Capacitive load
Document Number: 93585 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 23-Dec-08 3
KBPC1, KBPC6 Series
Single Phase Rectifier
Bridge, 3 A, 6 A Vishay High Power Products
Fig. 3 - Non-Repetitive Surge Ratings Fig. 4 - Non-Repetitive Surge Ratings
CIRCUIT CONFIGURATION
Maximum Peak Output Current (A)
Pulse Train Duration (s)
10-2 10-1 110
0
10
60
30
20
50
40
93585_03
From any rated load condition
KBPC1...
Maximum Peak Output Current (A)
Pulse Train Duration (s)
10-2 10-1 110
0
40
140
80
60
120
130
100
30
20
10
70
50
110
90
93585_04
From any rated load condition
KBPC6...
+
-
~
~
IO(av)
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95250
Document Number: 95250 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 23-Nov-07 1
D-72
Outline Dimensions
Vishay Semiconductors
DIMENSIONS in millimeters (inches)
+
~
~
Ø 3.80 (Ø 0.150)
15.75 (0.620)
14.75 (0.580)
15.75 (0.620)
14.75 (0.580)
10.8 (0.425)
10.0 (0.394)
5.33 (0.210)
4.33 (0.170)
25.4 (1.000)
MIN.
Ø 1.10 (Ø 0.043)
Ø 0.90 (Ø 0.035)
10.8 (0.425)
10.0 (0.394)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
VS-KBPC6005PBF VS-KBPC601PBF VS-KBPC604PBF VS-KBPC1005 VS-KBPC6005 VS-KBPC602PBF VS-
KBPC604 VS-KBPC601 VS-KBPC606 VS-KBPC606PBF VS-KBPC610 VS-KBPC108 VS-KBPC602 VS-
KBPC608PBF VS-KBPC610PBF VS-KBPC608 VS-KBPC102 VS-KBPC104 VS-KBPC110 VS-KBPC106
