Amphenol BACKSHELLS FOR LJT, RNJ, RNJ LP, JT, TV-CTV AND SJT CONNECTORS For MIL-DTL-38999 series I,II,III and VG96912 connectors BACKSHELLS <<< TABLE OF CONTENTS GENERAL CHARACTERISTICS...................................................................................................................................................................................................... page 3 BACKSHELLS FOR SHIELDING..................................................................................................................................................................................................... NSA and SA backshells..................................................................................................................................................................................................................... SQ backshells.................................................................................................................................................................................................................................... NSB backshells ................................................................................................................................................................................................................................. page 4 page 4 page 5 page 5 BAND BACKSHELLS FOR SHIELDING ......................................................................................................................................................................................... HE308-35 and TV35 backshells........................................................................................................................................................................................................ SBC backshells ................................................................................................................................................................................................................................. Integrated backshells......................................................................................................................................................................................................................... 3309 double band backshells............................................................................................................................................................................................................ page 6 page 6 page 7 page 8 page 9 STRAIN RELIEFS............................................................................................................................................................................................................................. page 10 SRD backshells ................................................................................................................................................................................................................................. page 10 ADAPTERS FOR HEAT-SHRINK MOULDED PIECES ................................................................................................................................................................... page 12 NSD backshells ................................................................................................................................................................................................................................. page 12 BACKSHELLS FOR POTTING ........................................................................................................................................................................................................ page 12 RPD backshells ................................................................................................................................................................................................................................. page 12 RPC backshells ................................................................................................................................................................................................................................. page 13 TOOLING AND ACCESSORIES ...................................................................................................................................................................................................... Coupling tool...................................................................................................................................................................................................................................... Clamping bands................................................................................................................................................................................................................................. Hand banding tools............................................................................................................................................................................................................................ Heat-shrink moulded pieces.............................................................................................................................................................................................................. page 13 page 13 page 13 page 13 page 14 ASSEMBLY INSTRUCTIONS........................................................................................................................................................................................................... NSA and SA backshells..................................................................................................................................................................................................................... SQ backshells.................................................................................................................................................................................................................................... NSB backshells ................................................................................................................................................................................................................................. HE308-35, TV35 and SBC backshells............................................................................................................................................................................................... 3309 backshells................................................................................................................................................................................................................................. page 15 page 15 page 16 page 16 page 16 page 17 HOW TO ORDER.............................................................................................................................................................................................................................. Amphenol designation - Backshells for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308) and SJT (VG96912) ...................................................................... HE308 designation - Backshells for HE308 (LJT / MIL-DTL-38999 series I / RNJ).......................................................................................................................... Amphenol designation - Backshells for JT (MIL-DTL-38999 series II) ............................................................................................................................................. Amphenol designation - Backshells for TV-CTV (MIL-DTL-38999 series III) and RNJ LP ............................................................................................................... Amphenol designation - 3309 backshells for LJT (MIL-DTL-38999 series I / HE308), JT (MIL-DTL-38999 series II) andTV-CTV (MIL-DTL-38999 series III) ................................................................................................................................................................................................................ page 17 page 17 page 18 page 18 page 19 page 19 TORQUE VALUE FOR REAR ACCESSORIES ............................................................................................................................................................................... page 20 CROSS REFERENCES .................................................................................................................................................................................................................... page 20 2 BACKSHELLS <<< GENERAL CHARACTERISTICS Main features * * Shell material - Aluminium alloy - Marine bronze - For composite, please consult us Finish - Olive drab cadmium plating - Electroless nickel plating - For others, please consult us * 9 shell sizes per model * Straight or right angled versions * * Applications Military and aeronautic applications: battlefields, ground vehicles, aircrafts. Advanced industrial applications with specific climatic, mechanical or electrical requirements. Working temperature - From - 65C to + 175C with olive drab cadmium plating - From - 65C to + 200C with electroless nickel plating French standard qualification capability (UTE 93422) For specific backshells for marine applications and 217 backshells, please consult us. Description You will find hereafter Amphenol Socapex backshells for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308), RNJ LP, TV-CTV (MIL-DTL-38999 series III) and SJT (VG96912) connectors, as well as specific light weight backshells for JT(MILDTL-38999 series II) connectors. These rear accessories enhance the performance capabilities of the connectors for both general duty and severe environment applications. Different technologies are used in order to ensure the following functions: - EMI shielding - cable retention - sealing This large choice of rear accessories provides you with the right solution for your connector/backshell interconnection. 3 BACKSHELLS <<< BACKSHELLS FOR SHIELDING These backshells, providing an electrical continuity between cable and connector, ensure a high level or of EMI/RFI protection. The sealing is ensured by straight or right angled heat shrink moulded piece at the rear of the backshell. NSA and SA backshells LJT NSA (HE308-13) suitable for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308) and SJT (VG96912) connectors. JT SA suitable for JT (MIL-DTL-38999 series II) connectors. TV NSA suitable for TV-CTV (MIL-DTL-38999 series III) and RNJ LP connectors. NSA and SA backshells ensure the shielding by clamping the braid with a screwing system. The free inner ring avoids twisting of the braid during screwing. For straight or right angled heat shrink moulded pieces, please refer to page 14-15. LJT NSA & JT SA Size a = 31.79 mm (1,252 in) max B max mm (in) +0.2 C max mm (in) O E max mm (in) O G max -0.5 mm (in) 6.90 15.20 16.40 9.60 18.40 19.53 LJT JT/SJT A Thread UNEF-2B 09 08 .4375-28 16.70 11 10 .5625-24 20.70 13 12 .6875-24 22.70 12.70 21.60 22.60 .8125-20 25.70 14.80 24.80 25.80 17.90 28.00 28.80 15 14 (0.658) (0.815) (0.894) (1.012) (0.272) (0.378) (0.500) (0.583) (0.598) (0.724) (0.850) (0.976) (0.646) (0.769) (0.890) (1.016) 17 16 .9375-20 28.70 19 18 1.0625-18 31.70 19.90 31.00 31.80 21 20 1.1875-18 35.70 23.10 34.20 33.87 1.3125-18 38.70 26.20 37.40 36.90 1.4375-18 41.70 28.80 40.60 41.52 23 22 25 24 (1.130) (1.248) (1.406) (1.524) (1.642) (0.705) (0.784) (0.909) (1.032) (1.134) TV NSA (1.221) (1.347) (1.472) (1.598) (1.134) (1.252) (1.334) (1.453) (1.635) a = 35.60 mm (1.402 in) max +0.2 C max mm (in) O E max mm (in) O G max -0.5 mm (in) 6.90 15.62 16.50 9.60 18.62 19.40 Size A Thread Metric B max mm (in) 09 M12 x 1.0 - 6H 16.70 11 M15 x 1.0 - 6H 20.70 13 M18 x 1.0 - 6H 22.70 12.70 21.64 22.60 15 M22 x 1.0 - 6H 25.70 14.80 25.60 25.80 M25 x 1.0 - 6H 28.70 17.90 28.50 29.00 19 M28 x 1.0 - 6H 31.70 19.90 31.62 32.00 21 M31 x 1.0 - 6H 35.70 23.10 34.11 35.20 23 M34 x 1.0 - 6H 38.70 26.20 37.13 38.40 M37 x 1.0 - 6H 41.70 28.80 40.13 41.50 17 25 (0.658) (0.815) (0.894) (1.012) (1.130) (1.248) (1.406) For ordering information, please refer to page 17 & 19 For assembly instructions, please refer to page 15 4 (1.102) (1.524) (1.642) (0.272) (0.378) (0.500) (0.583) (0.705) (0.784) (0.909) (1.032) (1.134) (0.615) (0.733) (0.852) (1.008) (1.122) (1.245) (1.343) (1.462) (1.580) (0.650) (0.764) (0.890) (1.016) (1.142) (1.260) (1.386) (1.512) (1.634) BACKSHELLS <<< BACKSHELLS FOR SHIELDING SQ backshells LJT SQ suitable for SJT (VG96912) connectors. SQ backshells ensure the shielding by clamping the braid with a screwing system. For straight or right angled heat shrink moulded pieces, please refer to page 14-15. +0.2 Size O A -0.2 mm (in) O B +0.3 mm (in) 08 19.00 14.00 10 22.00 16.00 12 25.00 18.00 14 28.00 16 O C +0.2 mm (in) O D max mm (in) E max mm (in) F-0.2 mm (in) G Thread UNEF-2B 6.20 16.00 30.00 17.00 19.00 30.00 (0.670) 7/16-28 7.00 20.00 22.00 30.00 (0.787) 9/16-24 9.50 23.00 12.50 25.10 33.00 (0.906) 11/16-24 22.00 26.00 13/16-20 30.00 25.00 15.50 28.30 33.00 (1.024) 28.00 18 28.00 18.50 31.30 34.00 (1.102) 15/16-20 34.00 32.00 20 32.00 21.50 34.50 36.00 (1.260) 11/16-18 38.00 36.00 22 34.00 23.50 37.70 36.00 (1.417) 13/16-18 43.00 41.00 15/16-18 24 45.00 38.00 27.5 40.80 36.00 (1.614) 43.00 (1.693) 17/16-18 (0.748) (0.867) (0.984) (1.102) (1.181) (1.339) (1.496) (1.693) (1.772) (0551) (0.244) (0.630) (0.276) (0.709) (0.630) (0.748) (0.374) (0.867) (1.339) (1.358) (0.925) (1.496) (1.300) (1.232) (0.846) (1.339) (1.300) (1.114) (0.728) (1.260) (1.181) (0.988) (0.610) (1.102) (1.181) (0.867) (0.492) (0.984) (1.181) (1.417) (1.484) (1.083) (1.417) (1.606) (1.417) NSB backshells LJT NSB suitable for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308) and SJT (VG96912) connectors. NSB backshells ensure the shielding by a tinned rear part to allow soldering of the braid. For straight or right angled heat shrink moulded pieces, please refer to page 14-15. 9 OA mm (in) 12.60 O B 0.2 mm (in) 20.00 O C max mm (in) 16.00 D* min mm (in) 7.80 E max mm (in) 9.50 F** max mm (in) 16.80 11 16.40 23.00 19.00 10.80 12.50 20.80 13 20.00 26.00 22.00 13.10 15.50 22.80 15 22.00 29.00 25.10 16.30 18.50 25.80 17 24.60 32.00 28.30 19.00 21.50 28.80 19 27.50 35.00 31.30 21.70 24.00 31.80 21 31.90 39.00 34.50 24.90 27.00 35.80 23 35.00 42.00 37.70 28.10 30.50 38.80 25 38.80 45.00 40.80 31.20 33.50 41.80 Size (0.496) (0.646) (0.787) (0.866) (0.969) (1.083) (1.256) (1.378) (1.528) For ordering information, please refer to page 17 For assembly instructions, please refer to page 16 (0.787) (0.906) (1.024) (1.142) (1.260) (1.378) (1.536) (1.654) (1.772) (0.630) (0.748) (0.866) (0.988) (1.114) (1.232) (1.358) (1.484) (1.606) (0.307) (0.425) (0.516) (0.642) (0.748) (0.854) (0.980) (1.106) (1.228) (0.374) (0.492) (0.610) (0.728) (0.847) (0.945) (1.063) (1.201) (1.319) (0.661) (0.819) (0.898) (1.016) (1.134) (1.252) (1.409) (1.528) (1.646) * max permissible cable outside diameter ** dimension over the flats (4 flats) 5 BACKSHELLS <<< BAND BACKSHELLS FOR SHIELDING These band backshells provide a full 360 shield termination. They are available with different cabling chamber lengths and exit diameters. The use of replaceable bands facilitates future maintenance or reparability. The sealing is ensured by straight or right angled heat shrink moulded piece at the rear of the backshell. HE308-35 and TV35 backshells HE308-35 suitable for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308) and SJT (VG96912) connectors. TV35 suitable for TV-CTV (MIL-DTL-38999 series III) and RNJ LP connectors. TVB35 suitable for TV bronze connectors. These straight band backshells provide a full 360 shield termination with a quick, easy and cost effective cabling process. For straight or right angled heat shrink moulded pieces, please refer to page 14-15. HE308-35 only OD mm (in) 7.80 O A max mm (in) 24.30 (0.957) TV35 and TVB35 only OC B Thread mm Metric (in) 18.00 M12 x 1.0-6H 18.40 10.80 27.40 (1.079) M15 x 1.0-6H 21.00 10.99 (1.079) 0.6875-24 21.60 13.10 31.80 (1.252) M18 x 1.0-6H 25.00 13.80 (1.252) 0.8125-20 24.80 16.30 35.00 (1.378) M22 x 1.0-6H 28.00 16.30 (1.378) 0.9375-20 28.00 19.50 38.10 (1.500) M25 x 1.0-6H 30.80 20.10 38.10 (1.500) 1.0625-18 31.00 21.70 41.20 (1.622) M28 x 1.0-6H 34.10 22.93 21 41.20 (1.622) 1.1875-18 34.20 24.90 44.30 (1.744) M31 x 1.0-6H 36.90 26.00 23 44.30 (1.744) 1.3125-18 37.40 28.10 47.20 (1.858) M34 x 1.0-6H 39.80 29.28 25 47.20 (1.858) 1.4375-18 40.60 31.20 50.00 (1.969) M37 x 1.0-6H 43.00 32.45 09 O A max mm (in) 21.40 (0.843) 0.4375-28 OC mm (in) 15.20 11 24.30 (0.957) 0.5625-24 13 27.40 15 31.80 17 35.00 19 Size B Thread UNEF-2B For ordering information, please refer to page 18 & 19 For assembly instructions, please refer to page 16 6 (0.598) (0.724) (0.850) (0.976) (1.102) (1.220) (1.347) (1.472) (1.599) (0.307) (0.425) (0.516) (0.642) (0.768) (0.854) (0.980) (1.106) (1.228) (0.709) (0.827) (0.984) (1.102) (1.213) (1.343) (1.453) (1.567) (1.693) OD mm (in) 7.80 (0.307) (0.433) (0.543) (0.642) (0.791) (0.903) (1.024) (1.153) (1.278) BACKSHELLS <<< BAND BACKSHELLS FOR SHIELDING Size 09 11 13 15 17 19 Coding 1/32 of Inch 36 36 12 (1.417) 10 (0.394) 36 (1.417) 10 (0.394) 36 or 56 O S min/max mm (in) O D1+/-0.1 mm (in) O D2+/-0.1 mm (in) 6.30 9.40/9.50 14.00 11.40 9.40 12.60/12.70 17.10 14.50 12 9.40 12.60/12.70 17.10 14.50 16 (1.417 or 2.204) 10 or 30 (0.394 or 1.181) 12.60 15.70/15.90 20.30 17.70 36 10 14 11.00 14.10/14.30 18.70 16.10 36 or 56 (1.417 or 2.204)) 10 or 30 20 (0.394 or 1.181) 15.80 18.90/19.10 23.50 20.90 36 16 (1.417) 10 (0.394) 12.60 15.70/15.90 20.30 17.70 51 12 (2.008) 25 (0.984) 9.40 12.60/12.70 17.10 14.50 36 or 56 24 (1.417 or 2.204) 10 or 30 (0.394 or 1.181) 19.00 22.00/22.20 26.70 23.10 36 16 (1.417) 10 (0.394) 12.60 15.70/15.90 20.30 17.70 36 or 56 24 (1.417 or 2.204) 10 or 30 (0.394 or 1.181) 19.00 22.00/22.20 26.70 23.10 36 10 20 15.80 18.90/19.10 23.50 20.90 20 14 11.00 14.10/14.30 18.70 16.10 10 or 30 28 22.10 25.20/25.40 29.80 26.20 19.00 22.00/22.20 26.70 23.10 (1.417) (1.417) (1.417) 21 46 (1.811) 36 or 56 (1.417 or 2.204) 25 08 (0.394) (0.394) (0.394) (0.787) Dimension min mm (in) (0.248) (0.370) (0.370) (0.496) (0.433) (0.622) (0.496) (0.370) (0.748) (0.496) (0.748) (0.394 or 1.181) (0.622) (0.433) (0.870) (0.370/0.374) (0.496/0.500) (0.496/0.500) (0.618/0.626) (0.555/0.563) (0.744/0.752) (0.618/0.626) (0.496/0.500) (0.866/0.874) (0.618/0.626) (0.866/0.874) (0.744/0.752) (0.555/0.563) (0.992/1) (0.551) (0.673) (0.673) (0.799) (0.736) (0.925) (0.799) (0.673) (1.051) (0.800) (1.051) (0.925) (0.736) (1.173) (0.449) (0.571) (0.571) (0.697) (0.634) (0.823) (0.697) (0.571) (0.909) (0.697) (0.909) (0.823) (0.634) (1.032) (1.417) 10 24 (0.394) 36 or 56 32 (1.417 or 2.204) 10 or 30 (0.394 or 1.181) 25.30 28.40/28.60 33.00 29.40 36 28 (1.417) 10 (0.394) 22.10 25.20/25.40 29.80 26.20 36 or 56 10 or 30 36 28.60 31.50/31.80 36.20 32.60 36 23 Z rear side diameter Cabling chamber length F+/-0.1 mm (in) 10 E max mm (in) (1.417 or 2.204) (0.748) (0.996) (0.394 or 1.181) (0.870) (1.126) (0.866/0.874) (1.118/1.126) (0.992/1) (1.240/1.252) (1.051) (1.299) (1.173) (1.425) (0.909) (1.158) (1.032) (1.284) SBC backshells LJT SBC suitable for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308) and SJT (VG96912) connectors. TV SBC suitable for TV-CTV (MIL-DTL-38999 series III) and RNJ LP connectors. These right angled band backshells provide a full 360 shield termination with a quick, easy and cost effective cabling process. For straight heat shrink moulded pieces, please refer to page 14-15. For ordering information, please refer to page 18 & 19 For assembly instructions, please refer to page 16 7 BACKSHELLS <<< BAND BACKSHELLS FOR SHIELDING LJT SBC only 09 (0.843) 0.4375-28 OC mm (in) 15.20 (0.957) M12 x 1.0-6H OC mm (in) 18.00 11 24.30 (0.957) 0.5625-24 18.40 10.80 27.40 (1.079) M15 x 1.0-6H 21.00 10.99 13 27.40 (1.079) 0.6875-24 21.60 13.10 31.80 (1.252) M18 x 1.0-6H 25.00 13.80 15 31.80 (1.252) 0.8125-20 24.80 16.30 35.00 M22 x 1.0-6H 28.00 16.30 17 35.00 (1.378) 0.9375-20 28.00 19.50 38.10 (1.500) M25 x 1.0-6H 30.80 20.10 19 38.10 (1.500) 1.0625-18 31.00 21.70 41.20 (1.622) M28 x 1.0-6H 34.10 22.93 21 41.20 (1.622) 1.1875-18 34.20 24.90 44.30 (1.744) M31 x 1.0-6H 36.90 26.00 23 44.30 (1.744) 1.3125-18 37.40 28.10 47.20 M34 x 1.0-6H 39.80 29.28 25 47.20 (1.858) 1.4375-18 40.60 31.20 50.00 M37 x 1.0-6H 43.00 32.45 Size E mm (in) 09 24.50 11 28.00 (1.102) 14 13 28.00 15 Size B Thread UNEF-2B (0.598) (0.724) (0.850) (0.976) (1.102) (1.220) (1.347) (1.472) (1.599) OD mm (in) 7.80 O A max mm (in) 24.30 TV SBC only O A max mm (in) 21.40 (0.307) (0.425) (0.516) (0.642) (0.768) (0.854) (0.980) (1.106) (1.228) Z rear side diameter Dimension Coding mm 1/32 of Inch (in) 7.90 10 (1.378) (1.858) (1.969) B Thread Metric OD mm (in) 7.80 (0.709) (0.307) (0.827) (0.433) (0.984) (0.543) (1.102) (0.642) (1.213) (0.791) (1.343) (0.903) (1.453) (1.024) (1.567) (1.153) (1.693) (1.278) F mm (in) OS mm (in) OH mm (in) OJ mm (in) 34.00 11.10 12.90 15.50 11.10 36.50 14.10 16.10 18.10 (1.102) 16 12.60 37.00 15.70 17.70 20.30 29.50 (1.161) 20 15.80 39.00 18.90 20.90 23.50 17 31.50 (1.240) 24 19.00 41.00 22.00 23.10 26.70 19 33.00 (1.299) 24 19.00 42.50 22.00 23.10 26.70 21 35.50 (1.398) 28 22.10 45.00 25.20 26.20 29.80 23 44.50 (1.752) 32 25.30 54.00 28.40 29.40 33.00 25 50.50 (1.988) 36 28.60 58.50 31.50 32.60 36.20 (0.965) (0.311) (0.437) (0.496) (0.622) (0.748) (0.748) (0.870) (0.996) (1.126) Integrated backshells Suitable for LJT (MIL-DTL-38999 series I / HE308), JT (MIL-DTL38999 series II), TV (MIL-DTL-38999 series III) and SJT (VG96912) connectors. Available on plugs and receptacles, these 2 in 1 connectors/band backshells provide a high EMI protection with a quick, easy and cost effective cabling process. They are low profile, with enhance sealing level and allow the use of macro and micro bands, as well as straight or right angled heat shrink moulded pieces. The design of the shells make them compatible with over moulding process. Do not hesitate to consult us. 8 (1.339) (1.437) (1.457) (1.535) (1.614) (1.673) (1.772) (2.126) (2.303) (0.437) (0.555) (0.618) (0.744) (0.866) (0.866) (0.992) (1.118) (1.240) (0.508) (0.634) (0.697) (0.823) (0.909) (0.909) (1.032) (1.158) (1.284) (0.610) (0.713) (0.799) (0.925) (1.051) (1.051) (1.173) (1.299) (1.425) BACKSHELLS <<< BAND BACKSHELLS FOR SHIELDING 3309 backshells 3309 suitable for LJT (MIL-DTL-38999 series I / HE308), JT (MIL-DTL-38999 series II) and TV-CTV (MIL-DTL-38999 series III) connectors. These double band backshells, with anti-decoupling device, were developed to be used with BUS 1553 systems. They allow the shielding of both twisted pairs and cable. Due to different pipes, different exit diameters are available. For LJT (MIL-DTL-38999 series I / HE308) and JT (MIL-DTL-38999 series) connectors Connector size JT LJT Backshell Size O A max mm (in) Thread UNEF-2B OB mm (in) L mm (in) L1 mm (in) L2 mm (in) Pipe interface mm (in) For straight version only 6.10 08 09 01 18.00 (0.709) 0.4375-28 16.00 (0.630) 38.80 (1.528) 31.20 (1.228) 32.55 (1.282) (0.240) For right angled version only 12.10 (0.476) 10 11 02 21.00 (0.827) 0.5625-24 13.00 34.80 34.60 34.85 12 13 03 24.00 (0.945) 0.6875-24 16.00 34.80 37.90 36.65 12.10 14 15 04 27.00 (1.063) 0.8125-20 19.00 34.80 40.90 37.35 15.10 16 17 05 30.00 (1.181) 0.9375-20 22.30 34.80 44.00 39.95 18.10 18 19 06 32.00 (1.260) 1.0625-18 25.00 34.80 47.00 41.45 20.10 07 37.00 (1.457) 1.1875-18 28.00 34.80 50.60 42.95 24.10 (1.575) 1.3125-18 31.30 34.80 53.60 44.45 27.10 (1.673) 1.4375-18 34.40 34.80 59.70 46.05 30.10 L mm (in) L1 mm (in) L2 mm (in) Pipe interface mm (in) 20 21 22 23 08 40.00 24 25 09 42.50 (0.512) (0.630) (0.748) (0.878) (0.984) (1.102) (1.232) (1.354) (1.370) (1.370) (1.370) (1.370) (1.370) (1.370) (1.370) (1.370) (1.362) (1.492) (1.610) (1.732) (1.850) (1.992) (2.110) (2.350) (1.372) (1.443) (1.471) (1.573) (1.632) (1.691) (1.750) (1.813) 9.10 (0.358) (0.476) (0.595) (0.713) (0.791) (0.949) (1.067) (1.185) For TV-CTV (MIL-DTL-38999 series III) connectors Connector size Backshell Size O A max mm (in) Thread Metric OB mm (in) For straight version only 09 11 18.00 (0.709) M12 x 1.0-6H 16.00 (0.630) 42.20 (1.661) 32.60 (1.284) 32.55 (1.282) 6.10 (0.240) For right angled version only 12.10 11 12 13 13 24.00 (0.945) M18 x 1.0-6H 16.00 36.20 39.30 36.65 12.10 15 14 27.00 (1.063) M22 x 1.0-6H 19.00 36.20 42.30 37.35 15.10 17 15 30.00 (1.181) M25 x 1.0-6H 22.30 36.20 45.40 39.95 18.10 16 32.00 (1.260) M28 x 1.0-6H 25.00 36.20 48.40 41.45 20.10 17 37.00 (1.457) M31 x 1.0-6H 28.00 36.20 52.00 42.95 24.10 23 18 40.00 (1.575) M34 x 1.0-6H 31.30 36.20 55.00 44.45 27.10 25 19 42.50 (1.673) M37 x 1.0-6H 34.40 36.20 61.10 46.05 30.10 19 21 (0.827) M15 x 1.0-6H 13.00 36.20 36.00 34.85 (0.476) 21.00 (0.512) (0.630) (0.748) (0.878) (0.984) (1.102) (1.232) (1.354) (1.425) (1.425) (1.425) (1.425) (1.425) (1.425) (1.425) (1.425) (1.417) (1.547) (1.665) (1.787) (1.906) (2.047) (2.165) (2.406) (1.372) (1.443) (1.471) (1.573) (1.632) (1.691) (1.750) (1.813) 9.10 (0.358) (0.476) (0.595) (0.713) (0.791) (0.949) (1.067) (1.185) For ordering information, please refer to page 19 For assembly instructions, please refer to page 17 9 BACKSHELLS BAND BACKSHELLS FOR SHIELDING 8529 8530 8534 8535 8542 8543 5.50 3.50 4.00 3.00 (0.984) 8528 25.00 8527 (0.925) 8526 (0.906) 8525 (0.847) (0.949) 21.50 8524 (0.787) 8523 20.00 8522 (0.728) 8521 18.50 8520 (0.709) (0.791) 8519 24.10 18.00 8517 (0.669) 8516 17.00 8515 (0.610) 15.50 8513 (0.551) 14.00 8514 20.10 (0.492) (0.713) 12.50 10.50 8511 8502 (0.413) 9.50 8510 (0.476) (0.374) 7.50 8509 8501 (0.295) 8508 (0.358) 8500 12.10 (0.236) (0.595) 8507 18.10 8555 (0.217) 8505 9.10 (in) Pipe Interface mm 8554 (0.158) 8504 (0.138) 8503 15.10 (0.118) 6.00 Cable entry OA mm 23.50 (1,011) 3309 Pipes 23.00 <<< (in) 6.10 (0.240) 27.10 (1.067) 30.10 8539 (1.185) <<< 8540 8541 8544 8545 STRAIN RELIEFS These backshells ensure a mechanical retention of the cable. SRD backshells JT SRD suitable for JT (MIL-DTL-38999 series II) connectors. JT SRD +0.25 Size A Thread UNEF-2B 08 .4375-28 O C +0.3 mm (in) O D +0.3 mm (in) E max mm (in) 6.35 19.05 23.88 7.92 20.62 23.88 7.92 11.13 23.83 23.88 9.53 14.27 26.97 30.23 3.18 (0.125) 4.78 (0.250) (0.750) (0.940) 10 .5625-24 12 .6875-24 14 .8125-20 16 .9375-20 12.70 15.88 28.58 30.23 18 1.0625-18 15.88 19.05 34.93 30.23 20 1.1875-18 15.88 19.05 34.93 30.23 22 1.3125-18 19.05 23.83 39.67 33.40 24 1.4375-18 20.32 25.40 42.06 33.40 For ordering information, please refer to page 18 10 O B -0.64 mm (in) (0.188) (0.312) (0.375) (0.500) (0.625) (0.625) (0.750) (0.800) (0.312) (0.438) (0.562) (0.625) (0.750) (0.750) (0.938) (1.000) (0.812) (0.938) (1.062) (1.125) (1.375) (1.375) (1.562) (1.656) (0.940) (0.940) (1.190) (1.190) (1.190) (1.190) (1.315) (1.315) 8531 8546 8547 8536 8537 8548 8549 8538 8550 8551 8552 8552 BACKSHELLS <<< STRAIN RELIEFS SRD backshells LJT SRD (HE308-11) suitable for LJT (MILDTL-38999 series I / HE308) and RNJ (HE308) connectors. TV SRD suitable for TV-CTV (MIL-DTL-38999 series III) and RNJ LP connectors. LJT SRD +0.05 5.00 16.70 5.00 20.70 10.00 22.70 9.50 25.70 +0.2 O G max -0.5 mm (in) A Thread UNEF-2B 09 .4375-28 15.20 20.80 20.80 11 .5625-24 18.30 23.90 24.40 13 .6875-24 21.30 26.90 27.20 15 .8125-20 24.60 30.00 30.20 17 .9375-20 27.70 32.80 33.80 12.00 28.70 12.70 1.0625-18 31.00 35.80 35.80 17.00 31.70 15.90 21 1.1875-18 34.00 39.90 39.40 15.50 35.70 15.90 23 1.3125-18 37.30 42.20 42.20 16.00 38.70 19.00 25 1.4375-18 39.60 45.20 45.70 21.00 41.70 20.30 Size A Thread Metric O B max mm (in) O C max mm (in) O D max mm (in) E max mm (in) O F -0.5 mm (in) 09 M12 x 1.0 - 6H 15.20 19.00 19.10 5.00 16.70 11 M15 x 1.0 - 6H 18.20 23.00 21.10 5.00 20.70 13 M18 x 1.0 - 6H 21.20 28.00 25.10 10.00 22.70 15 M22 x 1.0 - 6H 25.10 31.00 26.60 9.50 25.70 17 M25 x 1.0 - 6H 28.10 34.00 33.50 12.00 28.70 12.70 19 M28 x 1.0 - 6H 31.10 38.00 36.90 17.00 31.70 15.90 21 M31 x 1.0 - 6H 34.10 41.00 39.50 15.50 35.70 15.90 23 M34 x 1.0 - 6H 36.90 44.00 42.00 16.00 38.70 19.00 25 M37 x 1.0 - 6H 39.90 47.00 45.10 21.00 41.70 20.30 19 (0.721) (0.839) (0.969) (1.092) (1.221) (1.339) (1.469) (1.559) O D max mm (in) O F -0.5 mm (in) Size (0.598) O C max mm (in) E max mm (in) O B max mm (in) (0.819) (0.941) (1.059) (1.181) (1.291) (1.409) (1.571) (1.661) (1.780) (0.819) (0.197) (0.961) (0.197) (1.071) (1.189) (1.331) (1.409) (1.551) (1.661) (1.799) (0.394) (0.374) (0.472) (0.669) (0.610) (0.630) (0.827) 3.20 (0.658) (0.126) (0.815) (0.189) (0.894) (0.315) (1.012) (0.374) (1.130) (1.248) (1.406) (1.524) (1.642) 4.80 8.00 9.50 (0.500) (0.626) (0.626) (0.748) (0.799) TV SRD (0.598) (0.717) (0.835) (0.988) (1.106) (1.224) (1.343) (1.453) (1.571) (0.748) (0.906) (1.102) (1.221) (1.339) (1.496) (1.614) (1.732) (1.850) (0.752) (0.197) (0.831) (0.197) (0.988) (1.047) (1.319) (1.453) (1.555) (1.654) (1.776) (0.394) (0.374) (0.472) (0.669) (0.610) (0.630) (0.827) +0.05 +0.2 O G max -0.5 mm (in) 3.20 (0.658) (0.126) (0.815) (0.189) (0.894) (0.315) (1.012) (0.374) (1.130) (1.248) (1.406) (1.524) (1.642) 4.80 8.00 9.50 (0.500) (0.626) (0.626) (0.748) (0.799) For ordering information, please refer to page 17 & 19 11 BACKSHELLS <<< ADAPTERS FOR HEAT SHRINK MOULDED PIECES These backshells ensure the sealing and the mechanical retention of the cable. NSD backshells LJT NSD (HE308-14) suitable for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308) and SJT (VG96912) connectors. TV NSD suitable for TV-CTV (MIL-DTL-38999 series III) and RNJ LP connectors. For straight and right angled heat shrink moulded pieces, please refer to page 14-15. 9 A mm (in) 12.60 B 0.2 mm (in) 20.00 C max mm (in) 16.00 J* min mm (in) 7.80 K max mm (in) 9.50 L** max mm (in) 16.80 11 16.40 23.00 19.00 10.80 12.50 20.80 13 20.00 26.00 22.00 13.10 15.50 22.80 15 22.00 29.00 25.10 16.30 18.50 25.80 17 24.60 32.00 28.30 19.00 21.50 28.80 19 27.50 35.00 31.30 21.70 24.00 31.80 21 31.90 39.00 34.50 24.90 27.00 35.80 23 35.00 42.00 37.70 28.10 30.50 38.80 25 38.80 45.00 40.80 31.20 33.50 41.80 Size (0.496) (0.787) (0.646) (0.906) (0.787) (1.024) (0.866) (1.142) (0.969) (1.260) (1.083) (1.378) (1.256) (1.536) (1.378) (1.654) (1.528) (1.772) (0.630) (0.307) (0.748) (0.425) (0.866) (0.516) (0.988) (0.642) (1.114) (0.748) (1.232) (0.854) (1.358) (0.980) (1.484) (1.106) (1.606) (1.228) (0.374) (0.492) (0.610) (0.728) (0.847) (0.945) (1.063) (1.201) (1.319) (0.661) (0.819) (0.898) (1.016) (1.134) (1.252) (1.409) (1.528) (1.646) ** dimension over the flats (4 flats) <<< BACKSHELLS FOR POTTING These backshells ensure the sealing. RPD backshells LJT RPD suitable for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308) and JT (MIL-DTL-38999 series II) connectors. .4375-28 B max mm (in) 20.06 OC mm (in) 14.80 11 .5625-24 20.06 18.00 11.30 13 .6875-24 20.06 21.10 14.20 15 .8125-20 20.06 24.30 17.30 17 .9375-20 20.06 27.50 20.50 1.0625-18 20.06 30.70 23.10 1.1875-18 21.56 33.90 26.30 23 1.3125-18 21.56 37.00 29.40 25 1.4375-18 20.86 40.20 32.60 Size A Thread UNEF-2B 09 19 21 (0.790) (0.790) (0.790) (0.790) (0.790) (0.790) (0.849) For ordering information, please refer to page 17 & 19 12 (0.849) (0.821) (0.583) (0.709) (0.831) (0.957) (1.083) (1.209) (1.335) (1.457) (1.583) OD mm (in) 8.30 (0.327) (0.445) (0.559) (0.681) (0.807) (0.909) (1.035) (1.158) (1.284) BACKSHELLS <<< BACKSHELLS FOR POTTING RPC backshells LJT RPC suitable for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308) and JT (MIL-DTL-38999 series II) connectors. .4375-28 B max mm (in) 25.06 OC mm (in) 11.10 OD mm (in) 15.20 OE mm (in) 7.90 O F max mm (in) 19.70 11 .5625-24 28.16 14.30 18.40 11.10 23.20 13 .6875-24 29.86 17.50 21.90 13.10 26.50 15 .8125-20 32.56 19.80 24.70 15.90 30.80 17 .9375-20 33.56 22.60 27.90 16.70 32.80 19 1.0625-18 34.86 25.40 31.10 17.90 35.50 21 1.1875-18 37.26 28.60 34.30 19.50 38.90 23 1.3125-18 38.16 31.30 37.40 20.60 41.60 1.4375-18 44.46 34.90 40.60 23.30 50.00 Size A Thread UNEF-2B 09 25 <<< +0.4 (0.987) (0.437) (1.109) (0.563) (1.176) (0.689) (1.282) (0.780) (1.321) (0.890) (1.372) (1.000) (1.467) (1.126) (1.502) (1.232) (1.750) (1.374) (0.598) (0.724) (0.862) (0.972) (1.098) (1.224) (1.350) (1.472) (1.598) +0.4 (0.311) (0.437) (0.516) (0.626) (0.656) (0.705) (0.768) (0.811) (0.917) (0.776) (0.913) (1.043) (1.213) (1.291) (1.398) (1.531) (1.638) (1.969) TOOLING AND ACCESSORIES Coupling tool Coupling wrench for HE308-35 and TV(B) 35 backshells: 116.50 (Facom p/n) Clamping bands Standard band: 072952 or 3309 0150 000 Micro band (precoiled): 895693 or 3309 0151 000 Hand banding tools Banding tool for standard band: 809952 or 3309 0152 000 Banding tool for micro band: 809953 or 3309 0153 000 Caution: Tools and bands should never be lubricated 13 BACKSHELLS <<< TOOLING AND ACCESSORIES Heat-shrink moulded pieces Heat-shrink moulded piece p/n Straight Right angled 804221 814221 804222 814222 804223 814223 804225 814227 804227 814227 804229 814229 804231 814231 804232 814232 804233 814233 804235 814235 804237 814237 804239 814239 M max mm (in) OR mm (in) N 10% mm (in) After total heating 25.40 25.00 P 10% mm (in) (1.000) (0.984) 38.40 Before heating (max) 24.00 27.20 32.00 54.90 30.00 30.50 39.40 66.80 31.00 38.00 46.00 80.00 36.00 (1.417) (0.335) 45.00 55.00 99.10 43.00 10.00 54.00 80.00 130.00 60.00 16.00 (1.071) (1.201) (1.496) (1.772) (2.126) (1.260) (1.551) (1.811) (2.165) (3.150) (1.512) (2.161) (2.630) (3.150) (3.902) (5.118) (0.945) (1.181) (1.220) (1.693) (2.362) After heating (min cable O) 6.00 (0.236) 6.00 (0.236) 7.10 (0.280) 8.50 (0.394) (0.630) Standard heat-shrink moulded pieces (semi-rigid polyolefin - without any adhesive) Size 9 11 13 15 17 19 Backshell type NSA, NSB, NSD HE308-35, TV35, TVB35, SBC NSA, NSB, NSD HE308-35, TV35, TVB35, SBC NSA, NSB, NSD HE308-35, TV35, TVB35, SBC NSA NSB, NSD HE308-35, TV35, TVB35, SBC NSA NSB, NSD HE308-35, TV35, TVB35, SBC NSA NSB, NSD HE308-35, TV35, TVB35, SBC NSA, NSB, NSD 21 23 25 14 HE308-35, TV35, TVB35, SBC NSA, NSB, NSD HE308-35, TV35, TVB35, SBC NSA, NSB, NSD HE308-35, TV35, TVB35, SBC Rear size coding 08 12 12 16 14 20 12 16 24 16 24 14 20 28 24 32 28 36 Amphenol Socapex p/n 804221 804221 804222 804222 804223 804222 804223 804225 804223 804222 804225 804227 804225 804222 804223 804225 804227 804225 804223 804225 804227 804222 804225 804227 804229 804225 804227 804229 804227 804229 Straight Raychem p/n 202K121-3 202K121-3 202K132-3 202K132-3 202K142-3 202K132-3 202K142-3 202K153-3 202K142-3 202K132-3 202K153-3 202K163-3 202K153-3 202K132-3 202K142-3 202K153-3 202K163-3 202K153-3 202K142-3 202K153-3 202K163-3 202K132-3 202K153-3 202K163-3 202K174-3 202K153-3 202K163-3 202K174-3 202K163-3 202K174-3 Hellerman p/n 152-42-G 152-42-G 154-42-G 154-42-G 155-42-G 154-42-G 155-42-G 156-42-G 155-42-G 154-42-G 156-42-G 157-43-G 156-42-G 154-42-G 155-42-G 156-42-G 157-43-G 156-42-G 155-42-G 156-42-G 157-43-G 154-42-G 156-42-G 157-43-G 158-43-G 156-42-G 157-43-G 158-43-G 157-43-G 158-43-G Amphenol Socapex p/n 804231 804231 804232 804232 804233 804232 804233 804235 804233 804232 804235 804237 804235 804232 804233 804235 804237 804235 804233 804235 804237 804232 804235 804237 804239 804235 804237 804239 804237 804239 Right angled Raychem p/n 222K121-3 222K121-3 222K132-3 222K132-3 222K142-3 222K132-3 222K142-3 222K152-3 222K142-3 222K132-3 222K152-3 222K163-3 222K152-3 222K132-3 222K142-3 222K152-3 222K163-3 222K152-3 222K142-3 222K152-3 222K163-3 222K132-3 222K152-3 222K163-3 222K174-3 222K152-3 222K163-3 222K174-3 222K163-3 222K174-3 Hellerman p/n 1152-4-G 1152-4-G 1154-4-G 1154-4-G 1155-4-G 1154-4-G 1155-4-G 1156-4-G 1155-4-G 1154-4-G 1156-4-G 1157-4-G 1156-4-G 1154-4-G 1155-4-G 1156-4-G 1157-4-G 1156-4-G 1155-4-G 1156-4-G 1157-4-G 1154-4-G 1156-4-G 1157-4-G 1158-4-G 1156-4-G 1157-4-G 1158-4-G 1157-4-G 1158-4-G BACKSHELLS <<< TOOLING AND ACCESSORIES Heat-shrink moulded pieces for harsh environment, fluid resistant (with preinstalled adhesive) Size 9 11 13 15 17 19 Backshell type NSA, NSB, NSD HE308-35, TV35, TVB35, SBC NSA, NSB, NSD HE308-35, TV35, TVB35, SBC NSA, NSB, NSD HE308-35, TV35, TVB35, SBC NSA NSB, NSD HE308-35, TV35, TVB35, SBC NSA NSB, NSD HE308-35, TV35, TVB35, SBC NSA NSB, NSD HE308-35, TV35, TVB35, SBC NSA, NSB, NSD 21 23 25 <<< HE308-35, TV35, TVB35, SBC NSA, NSB, NSD HE308-35, TV35, TVB35, SBC NSA, NSB, NSD HE308-35, TV35, TVB35, SBC Rear size coding 08 12 12 16 14 20 12 16 24 16 24 14 20 28 24 32 28 36 Straight Amphenol Socapex Raychem p/n p/n 804221 202K121-25/225M 804221 202K121-25/225M 804222 202K132-25/225M 804222 202K132-25/225M 804223 202K142-25/225M 804222 202K132-25/225M 804223 202K142-25/225M 804225 202K153-25/225M 804223 202K142-25/225M 804222 202K132-25/225M 804225 202K153-25/225M 804227 202K163-25/225M 804225 202K153-25/225M 804222 202K132-25/225M 804223 202K142-25/225M 804225 202K153-25/225M 804227 202K163-25/225M 804225 202K153-25/225M 804223 202K142-25/225M 804225 202K153-25/225M 804227 202K163-25/225M 804222 202K132-25/225M 804225 202K153-25/225M 804227 202K163-25/225M 804229 202K174-25/225M 804225 202K153-25/225M 804227 202K163-25/225M 804229 202K174-25/225M 804227 202K163-25/225M 804229 202K174-25/225M Right angled Amphenol Socapex Raychem p/n p/n 804231 222K121-25/225M 804231 222K121-25/225M 804232 222K132-25/225M 804232 222K132-25/225M 804233 222K142-25/225M 804232 222K132-25/225M 804233 222K142-25/225M 804235 222K152-25/225M 804233 222K142-25/225M 804232 222K132-25/225M 804235 222K152-25/225M 804237 222K163-25/225M 804235 222K152-25/225M 804232 222K132-25/225M 804233 222K142-25/225M 804235 222K152-25/225M 804237 222K163-25/225M 804235 222K152-25/225M 804233 222K142-25/225M 804235 222K152-25/225M 804237 222K163-25/225M 804232 222K132-25/225M 804235 222K152-25/225M 804237 222K163-25/225M 804239 222K174-25/225M 804235 222K152-25/225M 804237 222K163-25/225M 804239 222K174-25/225M 804237 222K163-25/225M 804239 222K174-25/225M ASSEMBLY INSTRUCTIONS NSA and SA backshells 1. Prepare the cable for termination process and slide onto the cable the items in the order shown on figure 1. 2. Screw the backshell at the rear of the connector. 3. Fold back the braid on the outer jacket and fix it (figure 2) 4. Install the braid as shown on figures 3 and 4: Release the braid and cover the backshell (a) and the connector's shell. Slide the first ring (b) over the braid. Fold back the braid on the ring (b) and slide the second ring (c) over the braid and the first ring (b). Screw the last ring (d) at the rear of the backshell. If necessary, fix the extra braid on the outer jacket of the cable. If this installation (double folding of the braid) is not possible, refer to figure 5: Slide the first ring (b). Release the braid and cover the backshell (a) and the connector's shell. Cut the braid as shown. Slide the second ring (c) over the braid and the first ring (b). Screw the last ring at the rear of the backshell. 5. Install the heat-shrink moulded piece. Figure 1 Figure 2 Figure 4 Figure 3 Figure 5 15 BACKSHELLS <<< ASSEMBLY INSTRUCTIONS SQ backshells 1. Prepare the cable for termination process. 2. Screw the backshell at the rear of the connector. 3. Install the braid as shown on figure 1: Release the braid and cover the backshell conus. Maintain the braid on the conus with a small diameter wire in the groove. Fold back the braid on itself and cut it as shown. Screw the ring over the braid without twisting it. 4. Install the heat-shrink moulded piece. Figure 1 NSB backshells 1. Prepare the cable for termination process. 2. Screw the backshell at the rear of the connector. 3. If possible, protect the conductors with an insulationg tube or tape (e) inserted between them and the backshell. 4. Install the braid as shown of figure 1. 5. Install the heat-shrink moulded piece. Figure 2 Figure 3 Figure 1 Figure 2 HE308-35, TV35 and SBC backshells 1. Prepare the cable for termination process (figure 1). 2. Screw the backshell at the rear of the connector. 3. Push the braid over the backshell to the incline point. Milk the braid as required to remove the slack and insure a snug fit around the shield termination area (figure 2). 4. Prepare the band: Roll the band through the buckle slot twice (the band must be double-coiled). Pull on the band until the mark is within approximately 6.4 mm (.250 in) of the buckle slot (figure 3). The band may be tightened further if desired. 5. Squeeze the gripper release lever of the banding tool and insert the band into the front end opening of the tool as shown on figure 4 (the circular portion of looped band must always face downward). 6. Aligning the band and the tool with the shield termination area, squeeze the black pull-up handle repeatedly using short strokes until it locks against the tool body (this indicates the band is compressed to the tool precalibrated tension). 7. Complete the clamping process by squeezing the grey cutoff handle. 8. Remove the excess band from the tool. 9. Inspect shield termination (figure 5). Il the alignment of the band and the shield in unsatisfactory, tension on the band can be relaxed by pushing on the slotted release lever on the top of the tool. Make adjustments as necessary and squeeze again the black pull-up handle. 16 Figure 3 Figure 4 Figure 5 BACKSHELLS <<< ASSEMBLY INSTRUCTIONS 3309 backshells 1. Prepare the cable for termination process. 2. Clamp the braid on the pipe with a band (3309 0150 000 for pipes with diameter > 6 mm (.236 in) and 3309 0151 000 for pipes with diameter < 6 mm (.236 in)). See 1 . 3. Unscrew the nut and slide it back on the jacket. See 2 . 4. Remove the ring. See 3 . 5. Slide the pipe through the backshell and put the backshell back on the jacket. See 4 . 6. Put the ring back. See 5 . 7. Put the backshell back on the pipe. See 6 . 8. Screw the backshell nut at the rear to maintain the pipe inside the backshell. See 7 . 9. Screw the backshell at the rear of the connector. <<< HOW TO ORDER Amphenol designation - Backshells for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308) and SJT (VG96912) connectors Series LJT NSA Type of backshell NSA: screened clamping braid backshell accepting heat shrink moulded piece SQ: simple screened clamping braid backshell accepting heat shrink moulded piece NSB: screened soldering braid backshell accepting heat shrink moulded piece SBC: right angled band backshell accepting heat shrink moulded piece SRD: straight cable clamp NSD: backshell for heat shrink moulded piece RPD: straight backshell for potting RPC: 75 angled backshell for potting Size of backshell 09-11-13-15-17-19-21-23-25 for LJT connectors: same as connector size for SJT (G)06 and 00 connectors: greater than the connector size by 1 for SJT07 sizes 8 to 22 connectors: greater than the connector size by 3 Consult us for SJT07 size 24 connector Finish 014: olive-drab cadmium plating 023: electroless nickel plating Deviation F428: backshells for SJT connectors only 11 014 - 17 BACKSHELLS <<< HOW TO ORDER Amphenol designation - Backshells for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308) and SJT (VG96912) connectors Series LJT Type of backshell SBC: aluminium right angled band backshell accepting heat shrink moulded piece Size of backshell 09-11-13-15-17-19-21-23-25 (same as connector size) Rear side diameter Refer to pages 8 - Dimension Z (1/32 of inch) Finish 014: olive-drab cadmium plating 023: electroless nickel plating SBC 11 08 014 HE 308 military designation - Backshells for HE 308 (LJT / MIL-DTL-38999 series I / RNJ) connectors Series HE 308 Type of backshell 11: straight cable clamp 13: screened clamping braid backshell accepting heat shrink moulded piece 14: backshell for heat shrink moulded piece 15: straight backshell for potting Size of backshell 09-11-13-15-17-19-21-23-25 (same as connector size) Finish 7: olive-drab cadmium plating 6: electroless nickel plating Military standard Series HE308 - 35 Type of backshell 35: band backshell accepting heat shrink moulded piece Size of backshell 09-11-13-15-17-19-21-23-25 (same as connector size) Cabling chamber length 10-20-25-30 Refer to page 7 - Dimension F (mm) Rear side diameter Refer to page 7 - Dimension Z (1/32 of inch) Finish 7: olive-drab cadmium plating 6: electroless nickel plating Military standard 11 - 11 15 - 10 7 - 08 M -7 M 12 014 Note: Dashes are required in the P/N Amphenol designation - Backshells for JT (MIL-DTL-38999 series II) connectors Series JT Type of backshell SA: screened clamping braid backshell accepting heat shrink moulded piece SRD: straight cable clamp RPD: straight backshell for potting RPC: 75 angled backshell for potting Size of backshell 08-10-12-14-16-18-20-22-24 (same as connector size) Finish 014: olive-drab cadmium plating 023: electroless nickel plating 18 SA BACKSHELLS <<< HOW TO ORDER Amphenol designation - Backshells for TV-CTV (MIL-DTL-38999 series III) and RNJ LP connectors Series TV Type of backshell NSA: screened clamping braid backshell accepting heat shrink moulded piece SRD: straight cable clamp NSD: backshell for heat shrink moulded piece Size of backshell 09-11-13-15-17-19-21-23-25 (same as connector size) Finish 014: olive-drab cadmium plating 023: electroless nickel plating Series TV 35 Type of backshell 35: aluminium straight band backshell accepting heat shrink moulded piece B35: bronze straight band backshell accepting heat shrink moulded piece SBC: aluminium right angled band backshell accepting heat shrink moulded piece Size of backshell 09-11-13-15-17-19-21-23-25 (same as connector size) Cabling chamber length 10-20-25-30 For straight versions only - Refer to page 7 - Dimension F (mm) Rear side diameter Refer to pages 7 - Dimension Z (1/32 of inch) Finish 014: olive-drab cadmium plating 023: electroless nickel plating Blank: for bronze version 11 NSA 11 014 10 08 014 Amphenol designation - 3309 Double band backshells for LJT (MIL-DTL-38999 series I / HE308), JT (MIL-DTL-38999 series II) and TV-CTV (MIL-DTL-38999 series III) connectors Backshells Series 3309 Type of backshell 80: Straight double band backshell 82: Right angled double band backshell Size of backshell 01-02-03-04-05-06-07-08-09 for LJT and JT connectors - Refer to page 9 11-12-13-14-15-16-17-18-19 for TV-CTV connectors - Refer to page 9 Finish 012: olive-drab cadmium plating 018: electroless nickel plating 80 02 012 8500 012 Pipes Series Pipe - Refer to page 10 Finish 012: olive-drab cadmium plating 018: electroless nickel plating 3309 19 BACKSHELLS <<< TORQUES VALUES FOR REAR ACCESSORIES E118/A According to the MIL-C-85049 standard The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. Realisation: wanagen:studios - Steven Kilgallon For more information, please visit our website: www.amphenol-socapex.com