Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays SCHRACK
1
Power Relay 430 3 mm
n1 pole 16 A, 1 NO contact
nSafety mains isolation
nContact gap > 3 mm
nDC- and AC-coil
n4 kV / 8 mm coil-contact, reinforced insulation (VDE 0700)
nPCB mounting or quick connect terminals
nMounting brackets or snap mounting
nVersion with arc blow magnet for high DC-loads
nProduct in accordance to IEC60335-1
Applications
Domestic appliances, industrial appliances, industrial controls
F0256-B
Approvals
VREG.-Nr. C820, ZE214024
Technical data of approved types on request
Contact data
Contact configuration 1NO
Contact set bifurcated contact
Type of interruption full disconnection
Rated voltage / max. switching voltage AC 250 / 400 VAC
Rated current 16 A
Maximum breaking capacity AC 4000 VA
Limiting making capacity, max 4 s, duty factor 10% 25 A
Contact material AgCu3, AgCdO
Contact gap > 3 mm
Rated frequency of operation with / without load 15 / 300 min-1
Contact ratings
Type Contact Load Ambient Cycles
temp. [°C]
IEC 61810
0430 .4 .. 0 NO 16 A, 250 VAC, cosϕ=1 70°C 50x103
0430 .4 .. 1 NO 16 A, 250 VAC, cosϕ=1 70°C 50x103
Coil data
Rated coil voltage range DC coil 6...110 VDC
AC coil 6...240 VAC
Operative range to IEC 61810 2
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ohm mW
09 12 7.8 0.6 145+10% 993
10 24 15.6 1.2 580+10% 993
11 48 31.2 2.4 2200+10% 1047
13 110 71.5 5.5 13000+10% 931
Coil versions, AC-coil 50Hz
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VAC VAC VAC Ohm VA
23 24 18 3.6 145+10% 1.8
25 60 45 9.0 950+10% 1.8
26 110 83 16.0 3100+10% 1.8
27 230 175 35.0 11400+10% 1.8
28 240 185 36.0 13000+10% 1.8
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
2
SCHRACK
Power Relay 430 3 mm (Continued)
PCB layout / terminal assignment
Bottom view on solder pins
Dimensions
S0448-AE
S0449-CB
S0449-CH
S0448-AF
Snap mounting
Insulation
Dielectric strength coil-contact circuit 4000 Vrms
open contact circuit 2000 Vrms
Clearance / creepage coil-contact circuit W8 / 8 mm
Material group of insulation parts IIIa
Tracking index of relay base PTI 250
Insulation to IEC 61810-1
Type of insulation coil-contact circuit reinforced
open contact circuit full disconnection 3 mm
Rated insulation voltage 250 V
Pollution degree 3
Rated voltage system 230 / 400 V
Overvoltage category III
Other data
Mechanical endurance > 2.5x105cycles
Material
RoHS - Directive 2002/95/EC compliant as per product date code 0349
Environment
Ambient temperature range -20...+70°C
Shock resistance (destruction) 100 g
Category of protection RT I - dust protected
Processing
Mounting pcb, mounting brackets, snap mounting, DIN rail
Resistance to soldering heat 270°C / 10 s
Relay weight 32 g
Packaging unit 50 pcs
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays SCHRACK
3
Power Relay 430 3 mm (Continued)
Product key Typical product key 0430 2 5 09 1 100
Type
0430 Power relay 430 3 mm
Mounting
0PCB version 2snap mounting
1mounting brackets 5DIN-rail mounting
Contact design
4arc blowing magnet
5standard
Coil
Coil code: please refer to coil versions table
Contact material
0AgCu 3 1AgCdO
Version
100 standard
Other types on request
Product key Version Cont-material Cont.configuration Coil Coil Part number
0430 25 0911 00 snap mounting AgCdO 1 NO contact DC-coil 12 VDC 1-1415404-1
0430 25 1011 00 1.0mm plate 24 VDC 1-1415404-3
0430 25 2811 00 AC-coil 240 VAC 1-1415404-6
Dimensions
S0449-AD
Mounting brackets DIN-rail mount
S0449-CK
