DIONICS, INC. Phone: (516) 997-7474 Fax: (516) 997-7479 Website: www.dionics-usa.com 65 Rushmore Street Westbury, NY 11590 OPTO-ISOLATED PHOTOVOLTAIC ISO-GATETM MOSFET DRIVERS DIG-11-06-030 DIG-11-06-150 DIG-11-08-050 DIG-12-06-025 Features: 3/4 Completely Isolated Voltage Signal Generation 3/4 Dielectrically Isolated 3/4 Logic Circuit Compatibility 3/4 High Open Circuit Voltage 3/4 High Operating Temperature 3/4 Fast Response Time 3/4 High Isolation Resistance 3/4 Excellent Input/Output Linearity 3/4 Self Limiting Gate Voltage DIG-12-08-010 DIG-12-08-045 DIG-12-06-100 DIG-12-06-250 Applications: 3/4 Gate Drive For MOS devices 3/4 Gate Drive For SCR 3/4 Solid-State Relays 3/4 Interface Between Logic Circuits & External Loads 3/4 A.T.E. (Automatic Test Equipment) 3/4 Switching Equipment 3/4 Isolation Amplifiers 3/4 Load Control From Microprocessor I/O Ports 3/4 Thermocouple Open Detectors Description: The photovoltaic MOSFET driver is a State-of- the-Art, optically coupled floating power source used primarily to control MOSFETs when electrical isolation between input and output is required. The ISO-GATETM is a state-of-the-art optoisolator incorporating DIONICS' photovoltaic (PV) diode arrays and an infrared LED. The diode array is a unique I.C. consisting of series-connected photovoltaic diodes. The diodes are completely isolated from each other and from their common substrate by means of SiO2 Dielectric Isolation (DI). These photovoltaic output chips are electrically isolated but optically coupled to the LED. The typical input circuit to the LED is a limiting resistor connected in series with the LED. When activated, the LED emits infrared light towards the photovoltaic diode array, which then responds by generating an open circuit voltage (Voc). This Voc is floating and is therefore completely isolated. The Voc value depends on the LED input drive and load impedance. DIONICS, Inc offers a wide variety of package styles including low-cost plastic Mini-DIP's, high reliability TO-5 metal cans, 8-pin ceramic side brazed DIP's and ceramic chip carriers for hybrid manufacturers. Other custom packages and custom designs are also available. o o Group I: DIG-11-06-030; DIG-11-06-150; DIG-11-08-050. Group II: DIG-12-06-025; DIG-12-06-100; DIG-12-06-250; DIG-12-08-010; DIG-12-08-045. Package Layout: Pin Designation DIG-12 08-045 xxxx 0.250 DIG-11 06-030 xxxx 0.380 0.025 0.070 0.185 0.020 0.185 0.020 0.250 0.380 0.025 0.070 Pin Number 1 2 3 4 5 6 7 8 Group I Group II Input + Input + Input Input Not Connected Not Connected Not Connected Not Connected Not Connected Output1+ Output + Output1Not Connected Output2+ Output Output2- 08/2004 Group I and Group II Equivalent Circuits: 1 LED 1 8 PV 8 PV LED 2 7 2 7 3 6 3 6 PV 4 5 Group I Group II Absolute Maximum Ratings (Ta = 250C) Steady State 100 mA LED Forward Current Peak 10% Duty Cycle 250 mA LED Forward Current If = 20mA 1.7V* LED Forward Voltage 100A LED Reverse Current Vr = 3V 5V LED Reverse Voltage 20V Output Forward Voltage If = 10A 10 sec Lead Soldering Time At 2600C -50 to 1250C Storage Temperature Power Dissipation 150 mW * Note: DIG-12-06-100 and DIG-12-06-250 are rated @ 3.4 V Max. Individual Channel Electrical Characteristics (Ta =250C) MODEL NUMBERS DIG 12-08-010 12-06-025 12-08-045 12-06-100 12-06-250 11-06-030 11-08-050 11-06-150 Unit Parameter Symbol Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Open Circuit Voltage Voc Iled = 2mA 8.0 6.5 8.0 6.0 6.0 5.5 9.0 6.0 V Iled = 10mA 8.0 9.0 6.5 7.5 8.5 9.0 6.5 7.0 6.5 7.3 6.0 6.5 7.5 10.0 6.5 7.0 V Iled = 30mA 9.0 10.0 7.0 6.3 9.5 10.0 7.5 7.8 7.5 8.0 6.5 7.0 8.5 11.0 7.5 8.0 V Short Circuit Current Isc Iled = 2mA 0.5 1.0 1.0 2.0 3.0 1.1 2.0 3.0 A Iled = 10mA 1.35 3.0 3.0 6.0 4.0 8.0 8.0 12.0 12.5 25.0 1.0 7.0 4.0 13.0 10.0 18.0 A Iled = 30mA 4.0 9.0 9.0 20.0 12.0 25.0 30.0 40.0 37.5 75.0 3.5 20.0 12.0 40.0 30.0 55.0 A Turn-On Time If = 50 mA; C = 10pF P.W = 100us; s Ton - 3.0 - 10.0 - 8.0 - 3.0 - 3.0 - 8.0 - 5.0 - 3.0 - -100 - -80 - -100 - -80 - -80 - -40 - -50 - -40 mV/0C f =1kHz; Rs = 10M Temp. Coefficient (Channels in Series) Isolation Voltage Viso Iiso = 50A @ 2 sec Operating Temp. 2500 Top -500C To 2500 +1000C -500C To +800C (Channels in Series) Turn-Off Time Toff If = 50 mA; C = 10pF The Photovoltaic array stops generating current within one microsecond of the trailing edge P.W = 100us; of LED current the discharge time is solely dependent upon discharge circuitry and capacitive load. f =1kHz; Rs = 10M VDC Typical Applications 1. Power MOSFET Photovoltaic SPST N/O DC Relays Output - 8 PV Input + 1 LED 7 Rs 6 Input - 2 PV DIG-12-06-250 5 Enh. Output + 2. Power MOSFET SPDT Photovoltaic SPST N/O AC-DC Relays: Output 8 PV Input + 1 Enh. LED 7 6 Rs Input - 2 PV DIG-12-06-250 5 Enh. Output 3. Power MOSFET Photovoltaic SPST N/O Relays With High Speed Turn-Off: Output - 8 PV Input + 1 T.O Cir LED Enh. 7 6 T.O Cir Input - 2 PV DIG-12-06-250 5 Enh. R D1 Output + 4. Power MOSFET Photovoltaic SPST N/O Relays With Opto-Transitor for High Speed Turn-Off: Controller Input Output - 8 Input + 1 LED PV Input - 2 DIG-11-06-150 6 Enh. Output + 5. Open Thermocouple Detector: Input + 1 LED 8 PV Thermo Couple Input - Open Thermo Couple Output 2 DIG-11-06-030 6 V Ref 6. Isolation Amplifier: Vin 0.5V LM324 +10V LM324 27 Ohm + + - VOut - 7 1 5 100K 1M LED PV 8 PV 2 6 1M 50K