TVS Diodes Axial Leaded - 5 kW > TP5KP series TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Features Bi-directional Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit PPPM 5 kW PD 8.0 W IFSM 400 A VF 3.5 V TJ -55 to 150 C Storage Temperature Range TSTG -55 to 175 C Typical Thermal Resistance Junction to Lead RJL 8.0 C/W Typical Thermal Resistance Junction to Ambient RJA 40 C/W Peak Pulse Power Dissipation by 10/1000s Test Waveform (Fig.2) (Note 1) Steady State Power Dissipation on Infinite Heat Sink at TL=75C Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only (Note 3) Operating Junction Temperature Range Notes: 1. Non-repetitive current pulse per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. * Hi reliability application and automotive grade AEC Q101 qualified * Glass passivated chip junction in P600 package * 5 kW peak pulse capability at 10/1000s waveform, repetition rate (duty cycles):0.01% * Fast response time: typically less than 1.0ps from 0 Volts to VBR min * Excellent clamping capability * Typical failure mode is short from over-specified voltage or current * Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c * IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) * EFT protection of data lines in accordance with IEC 61000-4-4 * Low incremental surge resistance * Typical IR less than 2A when VBR min>12V * High temperature to reflow soldering guaranteed: 260C/10sec / 0.375", (9.5mm) lead length, 5 lbs., (2.3kg) tension * VBR @ TJ= VBR@25C x (1+T x (TJ - 25)) (T:Temperature Coefficient, typical value is 0.1%) * UL Recognized compound meeting flammability rating V-0 * Matte tin lead-free plated * Halogen free and RoHS compliant * Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Applications TVS Components are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. Functional Diagram Bi-directional Cathode Anode Uni-directional (c)2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/07/18 TVS Diodes Axial Leaded - 5 kW > TP5KP series Electrical Characteristics (T =25C unless otherwise noted) A Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) TP5KP11A TP5KP12A TP5KP13A TP5KP14A TP5KP15A TP5KP16A TP5KP17A TP5KP18A TP5KP20A TP5KP22A TP5KP24A TP5KP26A TP5KP28A TP5KP30A TP5KP33A TP5KP36A TP5KP40A TP5KP43A TP5KP45A TP5KP48A TP5KP51A TP5KP54A TP5KP58A TP5KP60A TP5KP11CA TP5KP12CA TP5KP13CA TP5KP14CA TP5KP15CA TP5KP16CA TP5KP17CA TP5KP18CA TP5KP20CA TP5KP22CA TP5KP24CA TP5KP26CA TP5KP28CA TP5KP30CA TP5KP33CA TP5KP36CA TP5KP40CA TP5KP43CA TP5KP45CA TP5KP48CA TP5KP51CA TP5KP54CA TP5KP58CA TP5KP60CA 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 Breakdown Voltage VBR (Volts) @ IT MIN MAX Test Current IT (mA) 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.00 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Maximum Clamping Voltage VC @ IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @ VR ( A) 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 280.2 256.3 237.2 219.8 209.0 196.2 184.8 174.7 157.4 143.7 131.1 121.1 112.3 105.4 95.7 87.8 79.1 73.5 70.2 65.9 61.9 58.6 54.5 52.7 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Agency Recognition X X X X X X X X X X X X X X X X X X X X X X X X I-V Curve Characteristics Bi-directional Uni-directional Ipp Vc VBR VR IR VF IT V Vc VBR VR IT IR Ipp PPPM VR VBR VC IR VF IR IT VR VBR Vc V Ipp Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional (c)2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/07/18 TVS Diodes Axial Leaded - 5 kW > TP5KP series Ratings and Characteristic Curves (T =25C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve 1000 PPPM-Peak Pulse Power (KW) Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS TJ initial = Tamb 100 5kW at 10/1000s, 25C 10 1 0.01 0.001 100 IPPM- Peak Pulse Current, % IRSM 150 75 50 25 0 25 50 75 100 125 150 tr=10sec Half Value IPPM IPPM ( ) 2 50 0 175 TJ=25C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 10/1000sec. Waveform as defined by R.E.A td 1.0 0 2.0 3.0 4.0 t-Time (ms) TJ - Initial Junction Temperature (C) Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance 100 100000 10000 Transient Thermal Impedance (C/W) Uni-direconal V=0V Cj (pF) 10 Figure 4 - Pulse Waveform Figure 3 - Peak Pulse Power Derating Curve Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 1 td-Pulse Width (ms) Time 0 0.1 Bi-direconal V=0V Uni-direconal V=VR 1000 100 Bi-direconal V=VR 10 1 1 10 100 VBR - Reverse Breakdown Voltage (V) 1000 10 1 0.1 0.01 0.1 1 10 100 1000 TP - Pulse Duration (s) (c)2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/07/18 TVS Diodes Axial Leaded - 5 kW > TP5KP series Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Figure 8 - Peak Forward Voltage Drop vs Peak Forward Current (Typical Values) 100 450 IF- Peak Forward Current(A) IFSM - Peak Forward Surge Current (A) 500 400 350 300 250 200 150 100 10 1 0.1 50 0.01 0 1 10 0.0 100 1.0 2.0 3.0 4.0 5.0 6.0 7.0 VF-Peak Forward Voltage(V) Number of Cycles at 60 Hz Soldering Parameters Pre Heat Lead-free assembly - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Average ramp up rate (Liquidus Temp (TA) to peak TS(max) to TA - Ramp-up Rate Reflow 3C/second max tp TP Ramp-up TL Temperature (T) Reflow Condition tL Critical Zone TL to TP Ts(max) Ts(min) Ramp-down ts Preheat 3C/second max - Temperature (TA) (Liquidus) 217C - Time (min to max) (ts) 60 - 150 seconds 25C t 25C to Peak Time (t) Peak Temperature (TP) 260+0/-5 C Time within 5C of actual peak Temperature (tp) 20 - 40 seconds Flow/Wave Soldering (Solder Dipping) Ramp-down Rate 6C/second max Peak Temperature : 265OC Time 25C to peak Temperature (TP) 8 minutes Max. Dipping Time : 10 seconds Do not exceed 260C Soldering : 1 time Physical Specifications Environmental Specifications Weight 0.07oz., 2.1g High Temp. Storage JESD22-A103 Case P600 molded plastic body over passivated junction. HTRB JESD22-A108 Polarity Color band denotes the cathode except Bipolar. Temperature Cycling JESD22-A104 Terminal Matte Tin axial leads, solderable per JESD22-B102. H3TRB JESD22-A101 RSH JESD22-B106 (c)2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/07/18 TVS Diodes Axial Leaded - 5 kW > TP5KP series Dimensions D C A A B Inches Dimensions Cathode Band (for Uni-directional products only) Millimeters Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.60 9.10 C 0.048 0.054 1.22 1.36 D 0.340 0.360 8.60 9.10 P600 Part Numbering System Part Marking System OPTION CODE: BLANK Reel Tape Cathode Band (for Uni-directional products only) TYPE CODE: A Uni-Directional (5% VBR Voltage Tolerance) CA Bi-Directional (5% VBR Voltage Tolerance) F TP5KP xxx XX X YYWW Trace Code Marking Littelfuse Logo VR VOLTAGE YY:Year Code WW: Week Code TP5KPXXX Product Type SERIES CODE Packing Options Part Number TP5KPxxxXX Component Package Quantity Packaging Option P600 800 Tape & Reel Packaging Specification EIA STD RS-296 Tape and Reel Specification Off Center either side 2.063+0.079/-0.039 (53.0+2.0/-1.0) 0.028(0.7) 2.56 (65.0) 0.047 (1.2) 0.394+/-0.020 (10.0+/-0.5) 13.0 (330.2) 0.236 (6.0) Dimensions are in inches/mm 3.0 (76.2) 0.68 (17.27) 2.75 (69.85) Recess Depth Max. 0.75 (19.05) Direction of Feed (c)2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/07/18