c 2004 cosmo ELECTRONICS CORPORATION
http://www.cosmo-ic.com
94
1. Anode
2. Cathode
3. NC
4. MAIN TERMINAL
5. SUBSTRATE DO NOT
CONNECT
6. MAIN TERMINAL
For 115/240 Vac (rms) Application:
1. Solenoid/Valve Controls
2. Lighting Controls
3. Static Power Switches
4. ACMotor Drives
5. Temperature Controls
6. E.M. Contactors
7. ACMotor Starters
8. Solid State Relays
9. Available package : DIP/ SMD/ H.
(For Package Dimension please refer to page 82 )
Absolute Maximum Ratings (Ta=25°C)
Electro-optical Characteristics (Ta=25°C)
UL 1577 (File No.E169586) VDE 0884 / 0860 / 0805 (File No.101347)
TOLERANCE :+ 0.2mm
Schematic : Top View
Parameter Symbol Rating Unit
Input Forward current IF50 mA
Peak forward current IFM 1
Reverse voltage VR6
Power dissipation PD70 mW
Output Off-State Output Terminal voltage VDRM 600 Vpeak
Peak Repetitive Surget Current ITSM 1
Power dissipation PD300 mW
Total power dissipation Ptot 330 mW
Isolation voltage 1 minute Viso 5000 Vrms
Operating temperature Topr -40 to +80 °C
Storage temperature Tstg -40 to +125 °C
Soldering temperature 10 seconds Tsol 260 °C
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Input Forward voltage VFIF =10mA — 1.2 1.5 V
Reverse Leakage Current IRVR =4V — — 10 UA
Output Peak Blocking Current IDRM VDRM =Rated — 60 500 nA
ON-State Voltage VTM ITM =100mA — 1.8 3 V
Critical rate of rise of OFF-state dV/dt 600 — — V/uS
voltage
Transfer Holding Current IH—100 — uA
charac- Inhibit Voltage (MT1-MT2 Voltage VINH IF=15mA — 5 20 V
teristics above which device not trigger.)
Leakage in Inhibited State IDRM2 IF =Rated IFT, Rated VDRM, Off State — — 500 uA
Isolation resistance Riso DC500V 5x1010 1011 — ohm
Minimum trigger current IFT Main Terminal Voltage=3V — — 15 mA
Outside Dimension : Unit (mm)
KMOC3061
Zero Crossing Optoisolators Triac Driver
Output (600V Volts Peak)
A
V
A
Fig.2 Inhibit Voltage versus
Temperature
Ta,AMBIENT TEMPERATURE (°C)
V INH, NORMALIZED
Fig.1 On-State Characteristics
VTM,ON-STATE VOLTAGE (VOLTS)
ITM,ON-STATE CURRENT (mA)
Fig.3 Leakage with LED Off versus
Temperature
Ta,AMBIENT TEMPERATURE (°C)
IDRM1,PEAK BLOCKING CURRENT (nA)
Fig.5 Trigger Current versus
Temperature
Ta,AMBIENT TEMPERATURE (°C)
IFT , NORMALIZED
Fig.4 IDRM2 ,Leakage in Inhibit State
versus Temperature
Ta,AMBIENT TEMPERATURE (°C)
IDRM2 NORMALIZED
KMOC3061
c 2004 cosmo ELECTRONICS CORPORATION
http://www.cosmo-ic.com
95
