PolarHVTM HiPerFET Power MOSFET IXFB 100N50P VDSS ID25 RDS(on) trr N-Channel Enhancement Mode Avalanche Rated Fast Intrinsic Diode Symbol Test Conditions VDSS TJ = 25 C to 150 C 500 V VDGR TJ = 25 C to 150 C; RGS = 1 M 500 V VGSS Continuous 30 V VGSM Transient 40 V ID25 IDRMS IDM TC = 25 C External lead current limit TC = 25 C, pulse width limited by TJM 100 75 250 A A A IAR TC = 25 C 100 A EAR TC = 25 C 100 mJ EAS TC = 25 C 5 J dv/dt IS IDM, di/dt 100 A/s, VDD VDSS, TJ 150 C, RG = 2 20 V/ns PD Maximum Ratings 1250 W -55 ... +150 150 -55 ... +150 C C C 300 260 C C 30..120/7.5...2.7 N/lb TJ TJM Tstg TL TSOLD 1.6 mm (0.062 in.) from case for 10 s Plastic body for 10 s FC Mounting force PLUS264TM (IXFB) G Weight 10 g Characteristic Values Min. Typ. Max. BVDSS VGS = 0 V, ID = 3 mA 500 VGS(th) VDS = VGS, ID = 8 mA 3.0 IGSS VGS = 30 VDC, VDS = 0 IDSS VDS = VDSS VGS = 0 V RDS(on) VGS = 10 V, ID = 0.5 ID25, Note 1 (c) 2006 IXYS All rights reserved TJ = 125 C S D = Drain TAB = Drain Features l l l International standard packages Fast recovery diode Unclamped Inductive Switching (UIS) rated Low package inductance - easy to drive and to protect Advantages l l l Symbol Test Conditions (TJ = 25 C, unless otherwise specified) (TAB) D G = Gate S = Source l TC = 25 C = 500 V = 100 A 49 m 200 ns Plus 264TM package for clip or spring Space savings High power density V 5.0 V 200 nA 25 2000 A A 49 m DS99496E(01/06) IXFB 100N50P Symbol Test Conditions Characteristic Values (TJ = 25 C, unless otherwise specified) Min. Typ. Max. gfs VDS = 20 V; ID = 0.5 ID25, Note 1 50 80 S 20 nF 1700 pF 140 pF 36 ns 29 ns 110 ns 26 ns 240 nC 96 nC 78 nC Ciss VGS = 0 V, VDS = 25 V, f = 1 MHz Coss Crss td(on) tr VGS = 10 V, VDS = 0.5 VDSS, ID =0.5 ID25 td(off) RG = 1 (External) tf Qg(on) Qgs VGS = 10 V, VDS = 0.5 VDSS, ID = 0.5 ID25 Qgd PLUS264TM (IXFB) Outline 0.10 C/W RthJC C/W 0.13 RthCS Source-Drain Diode Characteristic Values (TJ = 25 C, unless otherwise specified) Min. Typ. Max. Symbol Test Conditions IS VGS = 0 V 100 A ISM Repetitive 250 A VSD IF = IS, VGS = 0 V, Note 1 1.5 V trr IF = 25A, -di/dt = 100 A/s 200 ns QRM IRM VR = 100V 0.6 6.0 C A Notes: 1. Pulse test, t 300 s, duty cycle d 2 % IXYS reserves the right to change limits, test conditions, and dimensions. IXYS MOSFETs and IGBTs are covered by 4,835,592 one or moreof the following U.S. patents: 4,850,072 4,881,106 4,931,844 5,017,508 5,034,796 5,049,961 5,063,307 5,187,117 5,237,481 5,381,025 5,486,715 6,162,665 6,259,123 B1 6,306,728 B1 6,404,065 B1 6,534,343 6,583,505 6,683,344 6,710,405B2 6,710,463 6,727,585 6,759,692 6,771,478 B2 IXFB 100N50P Fig. 1. Output Characteristics @ 25C Fig. 2. Extended Output Characteristics @ 25C 100 220 V GS = 10V 8V 90 180 80 160 70 7V 60 I D - Amperes I D - Amperes V GS = 10V 9V 200 50 40 6V 30 8V 140 120 100 7V 80 60 20 40 10 20 5V 0 6V 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 0 2 4 6 8 100 18 20 22 24 26 2.5 R DS(on) - Normalized I D - Amperes 16 V GS = 10V 2.8 70 60 50 6V 40 30 2.2 1.9 I D = 100A 1.6 I D = 50A 1.3 1 20 5V 0.7 10 0.4 0 0 1 2 3 4 5 6 7 8 9 10 -50 11 -25 0 25 50 75 100 125 150 125 150 T J - Degrees Centigrade V DS - Volts Fig. 5. R DS(on) Normalized to ID = 50A Value vs. Drain Current Fig. 6. Maximum Drain Current v s. Case Temperature 90 3 V GS = 10V 2.8 External Lead Current Limit 80 TJ = 125C 2.6 70 2.4 2.2 I D - Amperes R DS(on) - Normalized 14 3.1 V GS = 10V 8V 7V 80 12 Fig. 4. R DS(on) Normalized to ID = 50A Value v s. Junction Temperature Fig. 3. Output Characteristics @ 125C 90 10 V DS - Volts V DS - Volts 2 1.8 1.6 60 50 40 30 1.4 TJ = 25C 20 1.2 10 1 0.8 0 0 20 40 60 80 100 120 I D - Amperes (c) 2006 IXYS All rights reserved 140 160 180 200 220 -50 -25 0 25 50 75 T J - Degrees Centigrade 100 IXFB 100N50P Fig. 8. Transconductance Fig. 7. Input Admittance 160 150 135 140 120 120 g f s - Siemens I D - Amperes 105 100 TJ = 125C 25C - 40C 80 60 TJ = - 40C 25C 125C 90 75 60 45 40 30 20 15 0 0 4 4.5 5 5.5 6 6.5 7 7.5 0 20 40 60 V GS - Volts Fig. 9. Forward Voltage Drop of Intrinsic Diode 100 120 140 160 180 225 250 Fig. 10. Gate Charge 300 10 V DS = 250V 9 250 I D = 50A 8 I G = 10mA 7 200 V GS - Volts I S - Amperes 80 I D - Amperes 150 100 TJ = 125C 6 5 4 3 2 TJ = 25C 50 1 0 0 0.4 0.6 0.8 1 1.2 1.4 1.6 0 25 50 V SD - Volts 75 100 125 150 175 200 Q G - NanoCoulombs Fig. 12. Forward-Bias Safe Operating Area Fig. 11. Capacitance 100,000 1,000 RDS(on) Limit C iss 25s 10,000 I D - Amperes Capacitance - PicoFarads f = 1 MHz C oss 1,000 100s 100 1ms 10ms 10 DC TJ = 150C C rss TC = 25C 100 1 0 5 10 15 20 25 30 35 40 V DS - Volts IXYS reserves the right to change limits, test conditions, and dimensions. 10 100 V DS - Volts 1000 IXFB 100N50P Fig. 13. Maximum Transient Thermal Resistance R (th)JC - C / W 1.000 0.100 0.010 0.001 0.0001 0.001 0.01 0.1 Pulse W idth - Seconds (c) 2006 IXYS All rights reserved 1 10