4N33SD - Fairchild Semiconductor

DESCRIPTION

The 4N29, 4N30, 4N31, 4N32, 4N33 have a gallium

arsenide infrared emitter optically coupled to a silicon

planar photodarlington.

GENERAL PURPOSE 6-PIN

PHOTODARLINGTON OPTOCOUPLERS

4N29 4N30 4N31 4N32 4N33

APPLICATIONS

• Low power logic circuits

• Telecommunications equipment

• Portable electronics

• Solid state relays

• Interfacing coupling systems of different potentials and impedances.

Parameter Symbol Value Units

TOTAL DEVICE TSTG -55 to +150 °C

Storage Temperature

Operating Temperature TOPR -55 to +100 °C

Lead Solder Temperature TSOL 260 for 10 sec °C

Total Device Power Dissipation @ TA= 25°C PD

250 mW

Derate above 25°C 3.3 mW/°C

EMITTER IF80 mA

Continuous Forward Current

Reverse Voltage VR3V

Forward Current - Peak (300 µs, 2% Duty Cycle) IF(pk) 3.0 A

LED Power Dissipation @ TA= 25°C PD

150 mW

Derate above 25°C 2.0 mW/°C

DETECTOR BVCEO 30 V

Collector-Emitter Breakdown Voltage

Collector-Base Breakdown Voltage BVCBO 30 V

Emitter-Collector Breakdown Voltage BVECO 5V

Detector Power Dissipation @ TA= 25°C PD

150 mW

Derate above 25°C 2.0 mW/°C

Continuous Collector Current IC150 mA

4/25/00 200038B

FEATURES

• High sensitivity to low input drive current

• Meets or exceeds all JEDEC Registered Specifications

• VDE 0884 approval available as a test option

-add option .300. (e.g., 4N29.300)

EMITTER

COLLECTOR

ANODE

CATHODE

6BASE

N/C

SCHEMATIC

ABSOLUTE MAXIMUM RATINGS (TA= 25°C Unless otherwise specified.)

4/25/00 200038B

GENERAL PURPOSE 6-PIN

PHOTODARLINGTON OPTOCOUPLERS

Parameter Test Conditions Symbol Min Typ Max Unit

EMITTER (IF= 10 mA) VF1.2 1.5 V

*Input Forward Voltage

*Reverse Leakage Current (VR= 3.0 V) IR0.001 100 µA

*Capacitance (VF= 0 V, f = 1.0 MHz) C 150 pF

DETECTOR (IC= 100 µA, IB= 0) BVCEO 30 60

V*Collector-Emitter Breakdown Voltage

*Collector-Base Breakdown Voltage (IC= 100 µA, IE= 0) BVCBO 30 100 V

*Emitter-Collector Breakdown Voltage (IE= 100 µA, IB= 0) BVECO 5.0 8 V

*Collector-Emitter Dark Current (VCE = 10 V, Base Open) ICEO 1 100 nA

DC Current Gain (VCE = 5.0 V, IC= 500 µA) hFE 5000

INDIVIDUAL COMPONENT CHARACTERISTICS

ELECTRICAL CHARACTERISTICS (TA= 25°CUnless otherwise specified.)

DC Characteristic Test Conditions Symbol Min Typ Max Units

*Collector Output Current(1,2) (4N32, 4N33) 50 (500)

(4N29, 4N30) (IF= 10 mA, VCE = 10 V, IB = 0) IC (CTR) 10 (100) mA (%)

(4N31) 5 (50)

*Saturation Voltage(2) (4N29, 4N30, 4N32, 4N33) (IF= 8.0 mA, IC= 2.0 mA) VCE(sat)

1.0 V

(4N31) 1.2

TRANSFER CHARACTERISTICS

Characteristic Test Conditions Symbol Min Typ Max Units

Input-Output Isolation Voltage(6)

(II-O 61 µA, Vrms, t = 1 min.) 5300 Vac(rms)

(4N29, 4N30, 4N31, 4N32, 4N33) VISO

*(4N32) VDC 2500 V

*(4N33) VDC 1500

Isolation Resistance(6) (VI-O = 500 VDC) RISO 1011 1

Isolation Capacitance(6) (VI-O = , f = 1 MHz) CISO 0.8 pf

ISOLATION CHARACTERISTICS

AC Characteristic Test Conditions Symbol Min Typ Max Units

Turn-on Time(3)

(IF= 200 mA, IC= 50 mA, VCC = 10 V) ton 5.0

Turn-off Time(3) (4N32, 4N33) (Fig.7) toff

100 µs

(4N29, 4N30, 4N31) 40

Bandwidth(4,5) BW 30 KHz

TRANSFER CHARACTERISTICS

4N29 4N30 4N31 4N32 4N33

GENERAL PURPOSE 6-PIN

PHOTODARLINGTON OPTOCOUPLERS

4/25/00 200038B

4N29 4N30 4N31 4N32 4N33

Fig. 6 Turn-Off Time vs. Input Current

IF - LED INPUT CURRENT (mA)

0.1 1 10 100

TOFF - TIME (µs)

100

1000

VCC = 10 V

RL = 100 1

RL = 1 k1

RL = 10 1

Fig. 3 Collector Current vs. Collector-Emitter Voltage

VCE- COLLECTOR -EMITTER VOLTAGE (V)

012345678910

IC - COLLECTOR CURRENT (NORMALIZED)

IF = 10 mA

IF = 5 mA

IF = 2 mA

IF = 1 mA

NORMALIZED TO:

IF = 1 mA

VCE = 5 V

Fig. 5 Turn-On Time vs. Input Current

IF - LED INPUT CURRENT (mA)

TON - TIME (µs)

0.1 1 10 100

0.1

100

1000

RL = 100 1

RL = 1 k1

RL = 10 1

VCC = 10 V

TA - AMBIENT TEMPERATURE (˚C)

ICEO - COLLECTOR-EMITTER DARK CURRENT (nA)

Fig. 4 Dark Current vs. Ambient Temperature

0 20406080100

0.01

0.1

100

1000

10000

VCE = 10 V

Fig. 1 Output Current vs. Input Current

IF - LED INPUT CURRENT (mA)

0.1 1 10 100

CTR - CURRENT TRANSFER RATIO (NORMALIZED)

0.1

NORMALIZED TO:

CTR @ IF = 10 mA

TA = 25˚C

VCE = 5 V

TA = 0˚C, 25˚C

TA = 70˚C

TA = 100˚C

TA = -55˚C

TA - AMBIENT TEMPERATURE (˚C)

Fig. 2 Current Transfer Ratio vs. Ambient Temperature

-80 -60 -40 -20 0 20 40 60 80 100 120

CTR - CURRENT TRANSFER RATIO (NORMALIZED)

0.1

NORMALIZED TO:

CTR @ IF = 10 mA

TA = 25˚C

VCE = 10 V

GENERAL PURPOSE 6-PIN

PHOTODARLINGTON OPTOCOUPLERS

4/25/00 200038B

4N29 4N30 4N31 4N32 4N33

INPUT OUTPUT

INPUT

90%

Test Circuit Waveforms

PULSE WIDTH

= 10 V

= 50 mA

= 200 mA

10%

off

OUTPUT PULSE

INPUT PULSE

<1 ms

Fig. 7 Switching Time Test Circuit and Waveforms

TYPICAL ELECTRO-OPTICAL CHARACTERISTIC CURVES

(25°C Free air temperature unless otherwise specified) (Cont.)

Notes

* Indicates JEDEC registered data.

1. The current transfer ratio(IC/IF) is the ratio of the detector collector current to the LED input current with VCE @ 10 V.

2. Pulse test: pulse width = 300µs, duty cycle 62.0% .

3. For test circuit setup and waveforms, refer to figure 7..

4. IFadjusted to IC= 2.0 mA and IC= 0.7 mA rms.

5. The frequency at which ICis 3dB down from the 1 KHz value.

6. For this test, LED pins 1 and 2 are common, and phototransistor pins 4,5 and 6 are common.

GENERAL PURPOSE 6-PIN

PHOTODARLINGTON OPTOCOUPLERS

4/25/00 200038B

4N29 4N30 4N31 4N32 4N33

Lead Coplanarity : 0.004 (0.10) MAX

0.270 (6.86)

0.240 (6.10)

0.350 (8.89)

0.330 (8.38)

0.300 (7.62)

TYP

0.405 (10.30)

MAX

0.315 (8.00)

MIN

0.016 (0.40) MIN

PIN 1

ID.

0.016 (0.41)

0.008 (0.20)

0.100 (2.54)

TYP

0.022 (0.56)

0.016 (0.41)

0.070 (1.78)

0.045 (1.14)

0.200 (5.08)

0.165 (4.18)

0.020 (0.51)

MIN

0.100 (2.54)

TYP

0.020 (0.51)

MIN

0.350 (8.89)

0.330 (8.38)

0.270 (6.86)

0.240 (6.10)

PIN 1

ID.

0.022 (0.56)

0.016 (0.41)

0.070 (1.78)

0.045 (1.14)

0.200 (5.08)

0.115 (2.92)

0.300 (7.62)

TYP

0° to 15°

0.154 (3.90)

0.100 (2.54)

SEATING PLANE

0.016 (0.40)

0.008 (0.20)

SEATING PLANE

0.016 (0.40)

0.008 (0.20)

0.070 (1.78)

0.045 (1.14)

0.350 (8.89)

0.330 (8.38)

0.154 (3.90)

0.100 (2.54)

0.200 (5.08)

0.115 (2.92)

0.004 (0.10)

MIN

0.270 (6.86)

0.240 (6.10)

0.400 (10.16)

TYP

0° to 15°

0.022 (0.56)

0.016 (0.41)

0.100 (2.54) TYP

NOTE

All dimensions are in inches (millimeters)

Call QT Optoelectronics for more information or the phone number of your nearest distributor.

United States 800-533-6786 • France 33 [0] 1.45.18.78.78 • Germany 49 [0] 89/96.30.51 • United Kingdom 44 [0] 1296 394499 • Asia/Pacific 603-7248193

www.qtopto.com

0.070 (1.78)

0.060 (1.52)

0.030 (0.76)

0.100 (2.54)

0.295 (7.49)

0.415 (10.54)

Package Dimensions (Surface Mount)Package Dimensions (Through Hole)

Package Dimensions (0.4”Lead Spacing) Recommended Pad Layout for

Surface Mount Leadform

GENERAL PURPOSE 6-PIN

PHOTODARLINGTON OPTOCOUPLERS

4/25/00 200038B

4N29 4N30 4N31 4N32 4N33

S .S Surface Mount Lead Bend

SD .SD Surface Mount; Tape and reel

W .W 0.4” Lead Spacing

300 .300 VDE 0884

300W .300W VDE 0884, 0.4” Lead Spacing

3S .3S VDE 0884, Surface Mount

3SD .3SD VDE 0884, Surface Mount, Tape & Reel

Option Order Entry Identifier Description

4.0 ± 0.1

Ø1.55 ± 0.05

User Direction of Feed

4.0 ± 0.1

1.75 ± 0.10

7.5 ± 0.1

16.0 ± 0.3

12.0 ± 0.1

0.30 ± 0.05

13.2 ± 0.2

4.85 ± 0.20

0.1 MAX 10.30 ± 0.20

9.55 ± 0.20

Ø1.6 ± 0.1

QT Carrier Tape Specifications (“D” Taping Orientation)

ORDERING INFORMATION

NOTE

All dimensions are in millimeters

Call QT Optoelectronics for more information or the phone number of your nearest distributor.

United States 800-533-6786 • France 33 [0] 1.45.18.78.78 • Germany 49 [0] 89/96.30.51 • United Kingdom 44 [0] 1296 394499 • Asia/Pacific 603-7248793

www.qtopto.com

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES

OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR

CORPORATION. As used herein:

1. Life support devices or systems are devices or systems

which, (a) are intended for surgical implant into the body,

or (b) support or sustain life, and (c) whose failure to

perform when properly used in accordance with

instructions for use provided in the labeling, can be

reasonably expected to result in a significant injury of the

user.

2. A critical component in any component of a life support

device or system whose failure to perform can be

reasonably expected to cause the failure of the life support

device or system, or to affect its safety or effectiveness.

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO

ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME

ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;

NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

4/25/00 200038B

GENERAL PURPOSE 6-PIN

PHOTODARLINGTON OPTOCOUPLERS