AXK(5(S)/6(S)) For board-to-board Narrow pitch connectors (0.5mm pitch) P5K, P5KS Series FEATURES 1. The product lineup consists of 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 8.0 mm, and 9.0 mm mated heights. * P5K 4. 6m m m 8m 5. Socket Type P5K Header * P5KS P5KS 5. 0m m m 4m 5. Socket Header Note: The external appearance and PC board pattern differs between the P5K and P5KS series. RoHS compliant Mated height 3 mm, 3.5 mm 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 8 mm, 9 mm Suction face Notes The external appearance and PC board pattern differs for the P5K and P5KS series. 2. Strong resistance to adverse environments! Utilizes " " construction for high contact reliability. 3. Even with a low profile, the effective mating length has been extended to ensure that there for insertion. P5K Header P5K Socket APPLICATIONS Digital devices, such as laptop, digital still cameras and digital video cameras With long effective mating lengths, even if the connection is not perfect, the electrical connection is more than enough for normal operations. Effective mating length Type P5K P5KS 4. Automatic mounting 1) Suction area for automatic mounting machines is employed. Effective mating length 0.65 mm 1.0 mm ORDERING INFORMATION 1. P5K (3.0 mm and 3.5 mm) AXK 7 Y G 5: Narrow Pitch Connector P5K Socket 6: Narrow Pitch Connector P5K Header Number of pins (2 digits) Mated height <Socket> 1: For mated height 3.0 mm and 3.5 mm <Header> 2: For mated height 3.5 mm 3: For mated height 3.0 mm Functions 4: Without positioning bosses Surface treatment (Contact portion / Terminal portion) 7: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface (Ni barrier product) Contact portion <Socket> Y: V notch type product <Header> Y: V notch type product Packing G: 1,500 pieces embossed tape and plastic reel x 2 Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ ACCTB22E 201303-T AXK(5(S)/6(S)) 2. P5KS (4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 8.0 mm and 9.0 mm) AXK 7 Y G 5S: Narrow Pitch Connector P5KS Socket 6S: Narrow Pitch Connector P5KS Header Number of pins (2 digits) Mated height <Socket> 0: For mated height 4.0 mm, 5.0 mm and 6.0 mm 2: For mated height 4.5 mm, 5.5 mm and 6.5 mm 3: For mated height 7.0 mm, 8.0 mm and 9.0 mm <Header> 4: For mated height 4.0 mm, 4.5 mm and 7.0 mm 5: For mated height 5.0 mm, 5.5 mm and 8.0 mm 6: For mated height 6.0 mm, 6.5 mm and 9.0 mm Functions 3: With positioning boss and direction for protection from reverse mating 4: Without positioning boss/with direction for protection from reverse mating 7: With positioning boss/without direction for protection from reverse mating 8: Without positioning boss and direction for protection from reverse mating Surface treatment (Contact portion / Terminal portion) 7: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface (Ni barrier product) Contact portion <Socket> Y: V notch type product <Header> Y: V notch type product Packing G: 1,500 pieces embossed tape and plastic reel x 2 Socket: Mated heights 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm Header: Mated heights 4.0 mm, 4.5 mm, 7.0 mm 1,000 pieces plastic reel x 2 Socket: Mated heights 7.0 mm, 8.0 mm, 9.0 mm Header: Mated heights 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 8.0 mm, 9.0 mm Note: Models with mating directionality to prevent reverse insertion have less than 100 pin contacts. Models without mating directionality to prevent reverse insertion have over 100 pin contacts. PRODUCT TYPES 1. P5K Part No. Product name Mated height 3.0 mm P5K 3.5 mm Packing No. of pins Socket Header 20 22 30 40 50 60 70 80 100 120 20 22 30 34 40 AXK520147YG AXK522147YG AXK530147YG AXK540147YG AXK550147YG AXK560147YG AXK570147YG AXK580147YG AXK500147YG AXK5A2147YG AXK520147YG AXK522147YG AXK530147YG AXK534147YG AXK540147YG AXK620347YG AXK622347YG AXK630347YG AXK640347YG AXK650347YG AXK660347YG AXK670347YG AXK680347YG AXK600347YG AXK6A2347YG AXK620247YG AXK622247YG AXK630247YG AXK634247YG AXK640247YG 50 60 70 80 100 120 AXK550147YG AXK560147YG AXK570147YG AXK580147YG AXK500147YG AXK5A2147YG AXK650247YG AXK660247YG AXK670247YG AXK680247YG AXK600247YG AXK6A2247YG Inner carton (1 reel) Outer carton 1,500 pieces 3,000 pieces Notes: 1. Regarding ordering units: During production: Please make orders in 1 reel units. Samples for mounting confirmation: Available in units of 50 pieces. Please contact our sales office. Samples: Small lot orders are possible. 2. The standard type comes without positioning bosses. ACCTB22E 201303-T Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ AXK(5(S)/6(S)) 2. P5KS Part No. Product name Mated height 4.0 mm P5KS 4.5 mm 5.0 mm 5.5 mm P5KS 6.0 mm 6.5 mm Packing No. of pins Socket Header 20 24 30 34 40 50 60 70 80 100 120 160 20 24 30 34 36 40 50 60 70 80 100 120 160 20 AXK5S20047YG AXK5S24047YG AXK5S30047YG AXK5S34047YG AXK5S40047YG AXK5S50047YG AXK5S60047YG AXK5S70047YG AXK5S80047YG AXK5S00047YG AXK5SA2077YG AXK5SA6077YG AXK5S20247YG AXK5S24247YG AXK5S30247YG AXK5S34247YG AXK5S36247YG AXK5S40247YG AXK5S50247YG AXK5S60247YG AXK5S70247YG AXK5S80247YG AXK5S00247YG AXK5SA2277YG AXK5SA6277YG AXK5S20047YG AXK6S20447YG AXK6S24447YG AXK6S30447YG AXK6S34447YG AXK6S40447YG AXK6S50447YG AXK6S60447YG AXK6S70447YG AXK6S80447YG AXK6S00447YG AXK6SA2477YG AXK6SA6477YG AXK6S20447YG AXK6S24447YG AXK6S30447YG AXK6S34447YG AXK6S36447YG AXK6S40447YG AXK6S50447YG AXK6S60447YG AXK6S70447YG AXK6S80447YG AXK6S00447YG AXK6SA2477YG AXK6SA6477YG AXK6S20547YG 24 30 34 40 50 60 70 80 100 20 24 30 34 40 50 60 70 80 100 20 30 40 50 60 70 80 100 20 30 40 50 60 70 80 100 130 AXK5S24047YG AXK5S30047YG AXK5S34047YG AXK5S40047YG AXK5S50047YG AXK5S60047YG AXK5S70047YG AXK5S80047YG AXK5S00047YG AXK5S20247YG AXK5S24247YG AXK5S30247YG AXK5S34247YG AXK5S40247YG AXK5S50247YG AXK5S60247YG AXK5S70247YG AXK5S80247YG AXK5S00247YG AXK5S20047YG AXK5S30047YG AXK5S40047YG AXK5S50047YG AXK5S60047YG AXK5S70047YG AXK5S80047YG AXK5S00047YG AXK5S20247YG AXK5S30247YG AXK5S40247YG AXK5S50247YG AXK5S60247YG AXK5S70247YG AXK5S80247YG AXK5S00247YG AXK5SA3277YG AXK6S24547YG AXK6S30547YG AXK6S34547YG AXK6S40547YG AXK6S50547YG AXK6S60547YG AXK6S70547YG AXK6S80547YG AXK6S00547YG AXK6S20547YG AXK6S24547YG AXK6S30547YG AXK6S34547YG AXK6S40547YG AXK6S50547YG AXK6S60547YG AXK6S70547YG AXK6S80547YG AXK6S00547YG AXK6S20647YG AXK6S30647YG AXK6S40647YG AXK6S50647YG AXK6S60647YG AXK6S70647YG AXK6S80647YG AXK6S00647YG AXK6S20647YG AXK6S30647YG AXK6S40647YG AXK6S50647YG AXK6S60647YG AXK6S70647YG AXK6S80647YG AXK6S00647YG AXK6SA3677YG Panasonic Corporation Automation Controls Business Division Inner carton (1 reel) Outer carton 1,500 pieces 3,000 pieces Socket: 1,500 pieces Header: 1,000 pieces Socket: 3,000 pieces Header: 2,000 pieces industrial.panasonic.com/ac/e/ ACCTB22E 201303-T AXK(5(S)/6(S)) Part No. Product name Mated height 7.0 mm P5KS 8.0 mm 9.0 mm Packing No. of pins Socket Header 20 30 40 50 60 70 80 100 20 30 40 50 60 70 80 100 20 30 40 50 60 70 80 100 AXK5S20347YG AXK5S30347YG AXK5S40347YG AXK5S50347YG AXK5S60347YG AXK5S70347YG AXK5S80347YG AXK5S00347YG AXK5S20347YG AXK5S30347YG AXK5S40347YG AXK5S50347YG AXK5S60347YG AXK5S70347YG AXK5S80347YG AXK5S00347YG AXK5S20347YG AXK5S30347YG AXK5S40347YG AXK5S50347YG AXK5S60347YG AXK5S70347YG AXK5S80347YG AXK5S00347YG AXK6S20447YG AXK6S30447YG AXK6S40447YG AXK6S50447YG AXK6S60447YG AXK6S70447YG AXK6S80447YG AXK6S00447YG AXK6S20547YG AXK6S30547YG AXK6S40547YG AXK6S50547YG AXK6S60547YG AXK6S70547YG AXK6S80547YG AXK6S00547YG AXK6S20647YG AXK6S30647YG AXK6S40647YG AXK6S50647YG AXK6S60647YG AXK6S70647YG AXK6S80647YG AXK6S00647YG Inner carton (1 reel) Outer carton Socket: 1,000 pieces Header: 1,500 pieces Socket: 2,000 pieces Header: 3,000 pieces 1,000 pieces 2,000 pieces Notes: 1. Regarding ordering units: During production: Please make orders in 1 reel units. Samples for mounting confirmation: Available in units of 50 pieces. Please contact our sales office. Samples: Small lot orders are possible. 2. The standard type comes without positioning bosses (However, mated heights of 4 mm or higher and 120 pins or more comes standard with bosses). Connectors with positioning bosses are available for on-demand production. ACCTB22E 201303-T Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ AXK(5(S)/6(S)) SPECIFICATIONS 1. Characteristics Item Electrical characteristics Rated current Rated voltage Breakdown voltage Insulation resistance 3mm, 3.5mm type 0.5A/terminal (Max. 10A) Contact resistance Mechanical characteristics Specifications 4mm, 4.5mm, 5mm, 7mm, 8mm, 9mm type 5.5mm, 6mm, 6.5mm type 0.5A/terminal (Max. 16A) 60V AC/DC 150V AC for 1 min. Min. 1000M Max. 60m Max. 80m Composite insertion force Composite removal force Max. 0.785N x no. of pins (initial) Contact holding force Min. 0.98N/pin contacts Ambient temperature -55C to +85C Max. peak temperature of 260C (on the surface of the PC board around the connector terminals) 300C within 5 sec., 350C within 3 sec. Conditions Detection current: 1mA Using 500V DC megger Based on the contact resistance measurement method specified by JIS C 5402. Min. 0.0588N x no. of pins Soldering heat resistance Measuring the maximum force. As the contact is axially pull out. No freezing at low temperatures Infrared reflow soldering Soldering iron Conformed to MIL-STD-202F, method 107G Thermal shock resistance (header and socket mated) 5 cycles, 5 cycles, insulation resistance min. 100M, contact resistance max. 60m insulation resistance min. 100M, contact resistance max. 80m Order 1 2 3 4 Environmental characteristics Humidity resistance (header and socket mated) Saltwater spray resistance (header and socket mated) Lifetime characteristics H2S resistance (header and socket mated) Insertion and removal life 120 hours, insulation resistance min. 100M, contact resistance max. 60m 24 hours, insulation resistance min. 100M, contact resistance max. 60m 48 hours, contact resistance max. 60m 120 hours, insulation resistance min. 100M, contact resistance max. 80m 24 hours, insulation resistance min. 100M, contact resistance max. 80m 48 hours, 50 times contact resistance max. 80m Temperature Time (C) (minutes) 30 -55 -30 Max. 5 +3 30 85 0 Max. 5 -55 -30 Bath temperature 402C, humidity 90 to 95% R.H. Bath temperature 352C, saltwarter concentration 51% Bath temperature 402C, gas concentration 31 ppm, humidity 75 to 80% R.H. Repeated insertion and removal speed of max. 200 times/hours P5K 3mm 30 pin contacts Socket: 0.17g Header: 0.09g P5KS 4mm 30 pin contacts Socket: 0.18g Header: 0.16g Unit weight 2. Material and surface treatment Part name Molded portion Mated height 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, 9mm Material Surface treatment Heat-resistant resin (UL94V-0) -- Contact/post Panasonic Corporation Copper alloy Contact portion: Ni plating on base, Au plating on surface Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal) The section close to the soldering portion has a nickel barrier. (The nickel base is exposed.) Automation Controls Business Division industrial.panasonic.com/ac/e/ ACCTB22E 201303-T AXK(5(S)/6(S)) DIMENSIONS (Unit: mm) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ P5K: Mated height 3mm, 3.5mm type * Socket CAD Data A B0.1 0.50.05 0.50.05 0.20.03 2.35 2.15 (0.9) Dimension table (mm) No. of pins 20 22 30 34 40 50 60 70 80 100 120 A 8.20 8.70 10.70 11.70 13.20 15.70 18.20 20.70 23.20 28.20 33.20 5 Suction face 1.44 B 4.50 5.00 7.00 8.00 9.50 12.00 14.50 17.00 19.50 24.50 29.50 4 5.8 (0.9) 0.170.03 (Terminal flatness) 0.1 General tolerance: 0.2 * Header CAD Data A B0.1 C D 0.50.05 0.20.03 0.50.05 (1.4) Dimension table (mm) No. of pins 20 22 30 34 40 50 60 70 80 100 120 A 8.20 8.70 10.70 11.70 13.20 15.70 18.20 20.70 23.20 28.20 33.20 Suction 1.44 face B 4.50 5.00 7.00 8.00 9.50 12.00 14.50 17.00 19.50 24.50 29.50 3.8 1.8 4.6 (1.4) 0.200.03 (Terminal flatness) 0.1 General tolerance: 0.2 Mated height 3.0 mm 3.5 mm C 2.40 2.90 * Socket and header are mated A +0.2 -0.1 Mated height 3.0 mm 3.5 mm A 3.00 3.50 Note: P5KS series (mated heights 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, and 9.0mm) cannot be mated to this type. ACCTB22E 201303-T Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ D 0.85 1.35 AXK(5(S)/6(S)) P5KS: Mated height 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, 9.0mm type * Socket CAD Data A B0.1 0.500.05 0.10 0.500.05 0.200.03 1.82 (Suction face) Dimension table (mm) No. of pins 20 24 30 34 36 40 50 60 70 80 100 A 8.20 9.20 10.70 11.70 12.20 13.20 15.70 18.20 20.70 23.20 28.20 C (1.10) 5.4 4.6 B 4.50 5.50 7.00 8.00 8.50 9.50 12.00 14.50 17.00 19.50 24.50 3.20 (1.10) 0.150.03 General tolerance: 0.2 Mated height 4.0 mm, 5.0 mm, 6.0 mm 4.5 mm, 5.5 mm, 6.5 mm 7.0 mm, 8.0 mm, 9.0 mm C 3.05 3.55 6.05 * Header CAD Data 0.10 C A 8.20 9.20 10.70 11.70 12.20 13.20 15.70 18.20 20.70 23.20 28.20 B 4.50 5.50 7.00 8.00 8.50 9.50 12.00 14.50 17.00 19.50 24.50 B0.1 A 0.200.03 General tolerance: 0.2 (1.1) No. of pins 20 24 30 34 36 40 50 60 70 80 100 2.8 1.72 (Suction face) 4.2 Dimension table (mm) 5.0 C (1.1) D 9 0.500.05 0.200.03 0. 0.500.05 Mated height 4.0 mm, 4.5 mm, 7.0 mm 5.0 mm, 5.5 mm, 8.0 mm 6.0 mm, 6.5 mm, 9.0 mm C 0.95 1.95 2.95 D 3.30 4.30 5.30 * Socket and header are mated A +0.2 -0.1 Note: P5K series (mated heights 3.0mm, 3.5mm) cannot be mated to this type. Panasonic Corporation Mated height 4.0 mm 4.5 mm 5.0 mm 5.5 mm 6.0 mm 6.5 mm 7.0 mm 8.0 mm 9.0 mm A 4.00 4.50 5.00 5.50 6.00 6.50 7.00 8.00 9.00 Automation Controls Business Division industrial.panasonic.com/ac/e/ ACCTB22E 201303-T AXK(5(S)/6(S)) P5KS: Mated height 4.0mm, 4.5mm for 120 pin contacts and 160 pin contacts types, 6.5mm for 130 pin contacts type * Socket A B0.1 0.500.05 0.200.03 Terminal flatness 0.10 1.82 (Suction face) CAD Data D (1.10) 4.6 No. of pins 120 130 160 A 32.50 35.00 42.50 B 29.50 32.00 39.50 C 32.00 34.50 42.00 3.20 5.4 (1.10) 0.45 0.150.03 3.000.08 C0.1 Mated height 4.0 mm 4.5 mm, 6.5 mm 0.500.05 dia. General tolerance: 0.2 D 3.05 3.55 * Header CAD Data A B0.10 0.10 C 31.00 33.50 41.00 2.80 Note 1) 0.200.03 0.500.05 dia. (1.10) B 29.50 32.00 39.50 2.100.08 A 32.50 35.00 42.50 0.45 No. of pins 120 130 160 1.72 (Suction face) 4.20 0.200.03 5.00 0.500.05 (1.10) D E C0.10 General tolerance: 0.2 Mated height 4.0 mm, 4.5 mm 6.5 mm D 3.30 5.30 E 0.95 2.95 * Socket and header are mated H+0.2 -0.1 ACCTB22E 201303-T Mated height 4.0 mm 4.5 mm 6.5 mm Panasonic Corporation H 4.00 4.50 6.50 Automation Controls Business Division Notes: 1. Inquiry separately for diagrams of the embossed tape and cautions for use. 2. Be sure to ask for proper specifications and drawings before actual use. industrial.panasonic.com/ac/e/ AXK(5(S)/6(S)) EMBOSSED TAPE DIMENSIONS (unit: mm, Common for respective contact type, socket and header) * Tape dimensions (Conforming to JIS C 0806:1990. However, some tapes have mounting hole pitches that do not comply with the standard.) Tape I Tape II A0.3 Taping reel D1 A0.3 C Label B C 12.0 Top cover tape 4 2 Pull out direction 4 2 1.75 380 dia. 1.75 Pull out direction * Plastic reel dimensions (Conforming to EIAJ ET-7200B) Embossed carrier tape Embossed mounting-hole 12.0 1.5+0.1 0 dia. 1.5+0.1 0 dia. Dimension table (mm) Suffix: G (1 reel, 1,500 pieces or 1,000 pieces embossed tape and plastic reel package) Type P5K Mated height No. of pins Type of taping A B C D Quantity per reel Socket and header are common 3.0mm, 3.5mm 20 to 50 60 to 70 80 to 100 120 Tape I Tape II Tape II Tape II 24.00 32.00 44.00 56.00 -- 28.40 40.40 52.40 11.50 14.20 20.20 26.20 25.40 33.40 45.40 57.40 1,500 pcs. Socket: 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm Header: 4.0mm, 4.5mm, 7.0mm 20 to 50 60 to 70 80 to 100 120 to 160 Tape I Tape II Tape II Tape II 24.00 32.00 44.00 56.00 -- 28.40 40.40 52.40 11.50 14.20 20.20 26.20 25.40 33.40 45.40 57.40 1,500 pcs. Socket: 7.0mm, 8.0mm, 9.0mm Header: 5.0mm, 5.5mm, 6.0mm, 6.5mm, 8.0mm, 9.0mm 20 to 50 60 to 70 80 to 100 130 Tape I Tape II Tape II Tape II 24.00 32.00 44.00 56.00 -- 28.40 40.40 52.40 11.50 14.20 20.20 26.20 25.40 33.40 45.40 57.40 1,000 pcs. P5KS Connector orientation with respect to direction of progress of embossed tape Type P5K Direction of tape progress Socket P5KS (Less than 100 contacts) Socket This corner is oriented on the C side. Header Socket This corner is oriented on the C side. Header Header This corner is oriented on the C side. Panasonic Corporation P5KS 120, 130, 160 contacts This corner is oriented on the C side. Automation Controls Business Division Note: There is no indication on this product regarding top-bottom or left-right orientation. industrial.panasonic.com/ac/e/ ACCTB22E 201303-T AXK(5(S)/6(S)) NOTES * P5K Socket * P5K Header Recommended PC board pattern (TOP VIEW) Recommended PC board pattern (TOP VIEW) B0.05 0.500.05 0.500.05 0.250.05 0.1250.05 0.750.05 0.1250.05 0.750.05 Metal mask thickness: When 150 m (Opening area ratio: 62%) 5.600.01 6.800.01 (1.10) Chamfered corner 0.1150.01 0.350.01 Recommended metal mask pattern Recommended metal mask pattern Metal mask thickness: When 120 m (Opening area ratio: 69%) Metal mask thickness: When 120 m (Opening area ratio: 78%) 6.800.01 (1.35) B0.01 0.500.01 0.500.01 0.230.01 4.100.01 B0.01 0.500.01 0.500.01 0.230.01 0.1150.01 0.350.01 0.1150.01 0.350.01 * See the dimension table on page 93 for more information on the B dimension of the socket and header. ACCTB22E 201303-T Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ 5.600.01 0.1150.01 0.350.01 (1.35) 2. Recommended PC board and metal mask patterns Connectors are mounted with high pitch density, intervals of 0.35 mm, 0.4 mm or 0.5 mm. In order to reduce solder and flux rise, solder bridges and other issues make sure the proper levels of solder is used. The figures to the right are recommended metal mask patterns. Please use them as a reference. B0.01 0.500.01 0.500.01 0.230.01 4.600.01 B0.01 0.500.01 0.500.01 0.230.01 (1.10) Mating state (1.55) Recommended metal mask pattern Metal mask thickness: When 150 m (Opening area ratio: 56%) 2.500.01 Recommended metal mask pattern (1.55) Chamfered corner 1.700.01 Chamfered corner (1.95) Chamfered corner 1.000.05 3.200.05 Chamfered corner MIN 6.800.05 Outline (top view) MIN 5.600.05 B0.05 0.500.05 0.500.05 0.250.05 (1.95) 1. Prevention of reverse mating Other than P5KS series 120, 130, 160 pin contacts type, the socket and header are protected from reverse mating by a molded resin key. Excessive mating force may damage the key, so be sure to match chamfered corners when mating. AXK(5(S)/6(S)) P5KS: Mated height 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, 9.0mm type * Socket 0.1150.01 0.350.01 0.1250.05 0.750.05 (1.65) 6.400.01 B0.01 0.500.01 0.500.01 0.230.01 (1.30) 3.800.01 6.400.01 Min. 6.400.05 0.250.05 (1.30) 0.500.05 Metal mask thickness: When 120 m (Opening area ratio: 76%) B0.01 0.500.01 0.500.01 0.230.01 2.400.05 0.500.05 Recommended metal mask pattern Metal mask thickness: When 150 m (Opening area ratio: 60%) 3.100.01 B0.05 Recommended metal mask pattern (1.65) Recommended PC board pattern (TOP VIEW) 0.1150.01 0.350.01 * See the dimension table on page 94 for more information on the B dimension. * Header 6.000.01 (1.90) (1.90) 0.1150.01 0.350.01 0.1250.05 0.750.05 2.200.01 B0.01 0.500.01 0.500.01 0.230.01 (1.50) 3.000.01 Min. 6.000.05 0.250.05 Metal mask thickness: When 120 m (Opening area ratio: 87%) 6.000.01 0.500.05 Recommended metal mask pattern Metal mask thickness: When 150 m (Opening area ratio: 69%) B0.01 0.500.01 0.500.01 0.230.01 2.000.05 B0.05 0.500.05 Recommended metal mask pattern (1.50) Recommended PC board pattern (TOP VIEW) 0.1150.01 0.350.01 * See the dimension table on page 94 for more information on the B dimension. P5KS: Mated height 4.0mm, 4.5mm for 120 pin contacts and 160 pin contacts types, 6.5mm for 130 pin contacts type * Socket B0.01 0.500.01 0.500.01 0.230.01 (1.50) 3.000.01 6.000.01 3.100.01 6.400.01 0.1250.05 0.50.05 B0.01 0.500.01 0.500.01 0.230.01 Min. 6.400.05 0.500.05 0.250.05 Metal mask thickness: When 120 m (Opening area ratio: 76%) (1.65) 3.000.05 (Positioning boss dimentions) 2.400.05 (Pattern dimensions) Recommended metal mask pattern Metal mask thickness: When 150 m (Opening area ratio: 60%) (1.65) B0.05 Recommended metal mask pattern (1.50) Recommended PC board pattern (TOP VIEW) C0.05 2-0.650.05 dia. (hole) 0.1150.01 0.350.01 0.1150.01 0.350.01 * See the dimension table on page 95 for more information on the B and C dimensions. * Header 2.200.01 B0.01 0.500.01 0.500.01 0.230.01 (1.50) 3.000.01 6.000.01 6.000.01 0.1250.05 0.500.05 B0.01 0.500.01 0.500.01 0.230.01 (1.90) 0.500.05 0.250.05 Metal mask thickness: When 120 m (Opening area ratio: 87%) Min. 6.000.05 2.100.05 (Positioning boss dimentions) 2.000.05 (Pattern dimensions) Recommended metal mask pattern Metal mask thickness: When 150 m (Opening area ratio: 69%) (1.90) B0.05 Recommended metal mask pattern (1.50) Recommended PC board pattern (TOP VIEW) C0.05 2-0.650.05 dia. (hole) 0.1150.01 0.350.01 0.1150.01 0.350.01 * See the dimension table on page 95 for more information on the B and C dimensions. Please refer to the latest product specifications when designing your product. Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ ACCTB22E 201303-T Notes on Using Narrow pitch Connectors Notes on Using Narrow pitch Connectors Regarding the design of devices and PC board patterns 1) When connecting several connectors together by stacking, make sure to maintain proper accuracy in the design of structure and mounting equipment so that the connectors are not subjected to twisting and torsional forces. 2) With mounting equipment, there may be up to a 0.2 to 0.3-mm error in positioning. Be sure to design PC boards and patterns while taking into consideration the performance and abilities of the required equipment. 3) Some connectors have tabs embossed on the body to aid in positioning. When using these connectors, make sure that the PC board is designed with positioning holes to match these tabs. 4) To ensure the required mechanical strength when soldering the connector terminals, make sure the PC board meets recommended PC board pattern design dimensions given. 5) For all connectors of the narrow pitch series, to prevent the PC board from coming off during vibrations or impacts, and to prevent loads from falling directly on the soldered portions, be sure to design some means to fix the PC board in place. Example) Secure in place with screws Screw Spacer Connector PC board Spacer When connecting PC boards, take appropriate measures to prevent the connector from coming off. 6) Notes when using a FPC. (1) When the connector is soldered to an FPC board, during its insertion and removal procedures, forces may be applied to the terminals and cause the soldering to come off. It is recommended to use a reinforcement board on the backside of the FPC board to which the connector is being connected. Please make the reinforcement board dimensions bigger than the outer limits of the recommended PC board pattern (should be approximately 1 mm greater than the outer limit). Material should be glass epoxy or polyimide, and the thickness should be between 0.2 and 0.3 mm. (2) Collisions, impacts, or turning of FPC boards, may apply forces on the connector and cause it to come loose. Therefore, make to design retaining plates or screws that will fix the connector in place. 7) The narrow pitch connector series is designed to be compact and thin. Although ease of handling has been taken into account, take care when mating the connectors, as displacement or angled mating could damage or deform the connector. Regarding the selection of the connector placement machine and the mounting procedures 1) Select the placement machine taking into consideration the connector height, required positioning accuracy, and packaging conditions. 2) Be aware that if the catching force of the placement machine is too great, it may deform the shape of the connector body or connector terminals. 3) Be aware that during mounting, external forces may be applied to the connector contact surfaces and terminals and cause deformations. ACCTB48E 201303-T 4) Depending on the size of the connector being used, self alignment may not be possible. In such cases, be sure to carefully position the terminal with the PC board pattern. 5) The positioning bosses give an approximate alignment for positioning on the PC board. For accurate positioning of the connector when mounting it to the PC board, we recommend using an automatic positioning machine. Panasonic Corporation Automation Controls Business Division 6) Excessive mounter chucking force may deform the molded or metal part of the connector. Consult us in advance if chucking is to be applied. industrial.panasonic.com/ac/e/ Notes on Using Narrow pitch Connectors Regarding soldering Terminal Soldering conditions Please use the reflow temperature profile conditions recommended below for reflow soldering. Please contact us before using a temperature profile other than that described below (e.g. lead-free solder). * Narrow pitch connectors (except P8 type) Upper limited (Solder heat resistance) Lower limited (Solder wettability) Temperature Peak temperature 260C 230C 180C 150C 4) Consult us when using a screenprinting thickness other than that recommended. 5) When mounting on both sides of the PC board and the connector is mounting on the underside, use adhesives or other means to ensure the connector is properly fixed to the PC board. (Double reflow soldering on the same side is possible.) 6) N2 reflow, conducting reflow soldering in a nitrogen atmosphere, increases the solder flow too greatly, enabling wicking to occur. Make sure that the solder feed rate and temperature profile are appropriate. Panasonic Corporation 25 sec. 70 sec. Time * Narrow pitch connector (P8) Table A Product name Soldering iron temperature SMD type connectors 300C within 5 sec. 350C within 3 sec. 2) Do not allow flux to spread onto the connector leads or PC board. This may lead to flux rising up to the connector inside. 3) Touch the soldering iron to the foot pattern. After the foot pattern and connector terminal are heated, apply the solder wire so it melts at the end of the connector terminals. Temperature 245C max. Apply the solder wire here Peak temperature 200C Preheating Terminal 60 to 120 sec. PC board foot pattern 220C 200C Preheating 60 to 120 sec. 155 to 165C Paste solder Peak temperature 2. Hand soldering 1) Set the soldering iron so that the tip temperature is less than that given in the table below. So ld iro erin n g 1. Reflow soldering 1) Measure the recommended profile temperature for reflow soldering by placing a sensor on the PC board near the connector surface or terminals. (The setting for the sensor will differ depending on the sensor used, so be sure to carefully read the instructions that comes with it.) 2) As for cream solder printing, screen printing is recommended. 3) To determine the relationship between the screen opening area and the PCboard foot pattern area, refer to the diagrams in the recommended patterns for PC boards and metal masks. Make sure to use the terminal tip as a reference position when setting. Avoid an excessive amount of solder from being applied, otherwise, interference by the solder will cause an imperfect contact. Small angle as possible up to 45 degrees Within 30 sec. Time For products other than the ones above, please refer to the latest product specifications. 7) The temperatures are measured at the surface of the PC board near the connector terminals. (The setting for the sensor will differ depending on the sensor used, so be sure to carefully read the instructions that comes with it.) 8) The temperature profiles given in this catalog are values measured when using the connector on a resin-based PC board. When performed reflow soldering on a metal board (iron, aluminum, etc.) or a metal table to mount on a FPC, make sure there is no deformation or discoloration of the connector beforehand and then begin mounting. 9) Consult us when using a screenprinting thickness other than that recommended. 10) Some solder and flux types may cause serious solder or flux creeping. Solder and flux characteristics should be taken into consideration when setting the reflow soldering conditions. Automation Controls Business Division PC board Pattern 4) Be aware that soldering while applying a load on the connector terminals may cause improper operation of the connector. 5) Thoroughly clean the soldering iron. 6) Flux from the solder wire may get on the contact surfaces during soldering operations. After soldering, carefully check the contact surfaces and clean off any solder before use. 7) For soldering of prototype devices during product development, you can perform soldering at the necessary locations by heating with a hot-air gun by applying cream solder to the foot pattern beforehand. However, at this time, make sure that the air pressure does not move connectors by carefully holding them down with tweezers or other similar tool. Also, be careful not to go too close to the connectors and melt any of the molded components. 8) If an excessive amount of solder is applied during manual soldering, the solder may creep up near the contact points, or solder interference may cause imperfect contact. 3. Solder reworking 1) Finish reworking in one operation. 2) For reworking of the solder bridge, use a soldering iron with a flat tip. To prevent flux from climbing up to the contact surfaces, do not add more flux. 3) Keep the soldering iron tip temperature below the temperature given in Table A. industrial.panasonic.com/ac/e/ ACCTB48E 201303-T Notes on Using Narrow pitch Connectors Handling Single Components 1) Make sure not to drop or allow parts to fall from work bench 2) Excessive force applied to the terminals could cause warping, come out, or weaken the adhesive strength of the solder. Handle with care. 3) Repeated bending of the terminals may cause terminals to break. 4) Do not insert or remove the connector when it is not soldered. Forcibly applied external pressure on the terminals can weaken the adherence of the terminals to the molded part or cause the terminals to lose their evenness. 5) Excessive prying-force applied to one end may cause product breakage and separation of the solder joints at the terminal. Excessive force applied for insertion in a pivot action as shown may also cause product breakage. Align the header and socket positions before connecting them. Cleaning flux from PC board 3) Since some powerful cleaning solutions may dissolve molded components of the connector and wipe off or discolor printed letters, we recommend aqua pura electronic parts cleaners. Please consult us if you wish to use other types of cleaning fluids. 4) Please note that the surfaces of molded parts may whiten when cleaned with alcohol. Handling the PC board Some connectors may change color slightly if subjected to ultraviolet rays during storage. This is normal and will not affect the operation of the connector. 3) When storing the connectors with the PC boards assembled and components alreeady set, be careful not to stack them up so the connectors are subjected to excessive forces. 4) Avoid storing the connectors in locations with excessive dust. The dust may accumulate and cause improper connections at the contact surfaces. 3) Before soldering, try not to insert or remove the connector more than absolutely necessary. 4) When coating the PC board after soldering the connector to prevent the deterioration of insulation, perform the coating in such a way so that the coating does not get on the connector. 5) There may be variations in the colors of products from different production lots. This is normal. 6) The connectors are not meant to be used for switching. 7) Be sure not to allow external pressure to act on connectors when assembling PCBs or moving in block assemblies. 1) To increase the cleanliness of the cleaning fluid and cleaning operations, prepare equipment for cleaning process beginning with boil cleaning, ultrasonic cleaning, and then vapor cleaning. 2) Carefully oversee the cleanliness of the cleaning fluids to make sure that the contact surfaces do not become dirty from the cleaning fluid itself. * Handling the PC board after mounting the connector When cutting or bending the PC board after mounting the connector, be careful that the soldered sections are subjected to excessive force. The soldered areas should not be subjected to force. Storage of connectors 1) To prevent problems from voids or air pockets due to heat of reflow soldering, avoid storing the connectors in areas of high humidity. When storing the connectors for more than six months, be sure to consider storage area where the humidity is properly controlled. 2) Depending on the connector type, the color of the connector may vary from connector to connector depending on when it is produced. Other Notes 1) These products are made for the design of compact and lightweight devices and therefore the thickness of the molded components has been made very thin. Therefore, be careful during insertion and removal operations for excessive forces applied may damage the products. 2) Dropping of the products or rough mishandling may bend or damage the terminals and possibly hinder proper reflow soldering. ACCTB48E 201303-T Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ Notes on Using Narrow pitch Connectors Regarding sample orders to confirm proper mounting When ordering samples to confirm proper mounting with the placement machine, connectors are delivered in 50piece units in the condition given right. Consult a sale representative for ordering sample units. Please refer to the latest product specifications when designing your product. Condition when delivered from manufacturing Reel Embossed tape amount required for the mounting Required number of products for sample production (Delivery can also be made on a reel by customer request.) (Unit 50 pcs.) Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ ACCTB48E 201303-T