DATA S H E E T MINIATURE SIGNAL RELAY EC2 SERIES COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE DESCRIPTION The EC2 series has reduced mounting space but sustained high-performance of NEC EA2 series. Furthermore, it complies with 2500 V surge-voltage requirement of Bellcore specification. FEATURES TM Compact and light weight TM 2 form c contact arrangement TM Low power consumption TM Reduced mounting space : 15 mm x 7.5 mm TM High-breakdown voltage of coil to contacts : 1500 Vac, 2500 V (rise time : 2 s, fall time : 10 s) TM Capable of High-power switching : 700 Vac, 4.2 A, 4 times in case of accident TM UL recognized (E73266), CAS certified (LR46266) APPLICATIONS Electronic switching systems, PBX, terminal equipment, telephone systems. For Right Use of Miniature Relays DO NOT EXCEED MAXIMUM RATINGS. Do not use relays under exceeding conditions such as over ambient temperature, over voltage and over current. Incorrect use could result in abnormal heating, damage to related parts or cause burning. READ CAUTIONS IN THE SELECTION GUIDE. Read the cautions described in NEC's "Miniature Relays" (ER0046EJ) when you choose relays for your application. Document No. ER0002EJ4V0DS00 (4th edition) Date Published June 1999 M Printed in Japan (c) 1994(1996) EC2 SERIES PAD LAYOUT (bottom view) 9.4(0.37) MAX. 0.25 (0.01) 3.2 (0.13) 0.5 (0.02) 5.08 2.54 2.54 2.54 (0.20)(0.10)(0.10)(0.10) 2.54 (0.10) Note. General tolerance : + - 0.2 ( + - 0.008) Dimensions in show basic size. NJ type : Leads-2.8 mm (0.11) 5 x 2.54 (0.1) Note. General tolerance : + - 0.1 ( + - 0.004) MARKINGS SAFETY STANDARD AND RATING UL Recognized (UL508) File No E73266 CSA Certificated (CSA C22.2 No 14) File No LR46266 30 Vdc, 2A (Resistive) 110 Vdc, 0.3A (Resistive) 125 Vdc, 0.5A (Resistive) Standard type 1 2 10- 0.8 (0.31) 2.54 (0.10) 4 x 2.54 (0.1) 5.08 (0.20) Double coil latch 2 x 2.54(0.1) 8- 0.8 (0.31) 7.5 (0.30) MAX. 15.0 (0.59) MAX. 2.54(0.1) Non-latch and Single coil latch EC2-5 Spacing : UL114, UL478 JAPAN 5 9206 q Part number 3 (pin No. 1, 12) TUV Certificate (EN60255 / IEC60255) No. R 9751153 (Nonlatch and Single-coil-latch) Creepage and clearance of coil to contact is more than 2 mm. (According EN60950) y UL, CSA Marking Basic insulation class w Manufacturer 4 e Country of origin r Date code UL recognized, t Index mark of relay direction CSA certified type 1 2 5 EC2-5NU JAPAN 6 9206 3 4 PIN CONFIGURATIONS (bottom view) 1 3 4 5 1 3 4 5 R S Index mark of relay direction 12 10 9 8 Non-latch type (not energized position) 3 4 5 6 S 12 10 9 8 Single coil latch type (reset position) S : Coil polarity of set (operate) R : Coil polarity of reset (release) 2 1 DATA SHEET ER0002EJ4V0DS00 R 12 10 9 8 7 Double coil latch type (reset position) 2 x 2.54(0.1) Unit : mm (inch) 2.54(0.1) OUTLINE DRAWING AND DIMENSIONS EC2 SERIES PART NUMBER SYSTEM E C 2 - 9 S NU Nil : Standard type NU : UL recognized, CSA certified type NJ : Trimed leads type NP : Silver-palladium alloy contact (with gold alloy overlay) UL recognized, CSA certified type Latch type Nil : Non-latch type S : Single coil latch type T : Double coil latch type Nominal coil voltage 3, 4.5, 5, 6, 9, 12, 24 V EC2 series PERFORMANCE CHARACTERISTICS Contact Form 2 Form c Contact Material Silver alloy with gold alloy overlay Contact Ratings (UL / CSA Rating) Maximum Switching Power 60 W, 125 VA Maximum Switching Voltage 220 Vdc, 250 Vac Maximum Switching Current 2A Maximum Carrying Current 2A Minimum Contact Ratings 10 mVdc, 10 A 1 Initial Contact Resistance 50 m typ. (Initial) Nominal Operating Power Non-Latch Type 140 mW (3 to 12 V), 200 mW (24 V) Single Coil Latch Type 100 mW Single Coil Latch Type 140 mW Operate Time (Excluding Bounce) Approx. 2 ms Release Time (Excluding Bounce) Approx. 1 ms without diode Insulation Resistance 1000 M at 500 Vdc Between Open Contacts Breakdown Voltage Between Adjacent Contacts Between Coil and Contact 1000 Vac (for one minute) 1500 V surge (10 x 160 s 2) 1500 Vac (for one minute) 2500 V surge, (2 x 10 s 3) Double Coil 1000 Vac (for one minute) Latch type 1500 V surge (10 x 160 s 2) Shock Resistance 735 m / s 2 (75 G) (misoperating) 980 m / s 2 (100 G) (destructive failure) Vibration Resistance 10 to 55 Hz double amplitude of 3 mm (20 G) (misoperating) 10 to 55 Hz, double amplitude of 5 mm (30 G) (Destructive failure) Ambient Temperature -40 to 85C Coil Temperature Rise 18 degrees at nominal coil voltage (140 mW) No-load Running specifications Weight Load 1 x 108 4 operations (Non-latch type) 1 x 107 operations (latch type) 50 Vdc, 0.1 A (resistive) 1 x 106 operations at 85C, 2 Hz 10 Vdc, 10 mA (resistive) 1 x 106 operations at 85C, 2 Hz Approx. 1.9 g 1 This value is reference value in the resistance load. Minimum capacity changes depending on switching frequency and environment temperatur and the load. 2 rise time : 10 s, fall time : 160 s 3 rise time : 2 s, fall time : 10 s 4 This shows a number of operation where it can be running by which a fatal defect is not caused, and a number of operation by whicha steady characteristic is maintained is 1 x 107 times. DATA SHEET ER0002EJ4V0DS00 3 EC2 SERIES PRODUCT LINEUP Non-latch Type at 20C Coil Resistance () 10 % Nominal Coil Voltage (Vdc) 3 Must Operate Voltage (Vdc) 64.3 Must Release Voltage (Vdc) 2.25 0.3 4.5 145 3.38 0.45 5 178 3.75 0.5 6 257 4.5 0.6 9 579 6.75 0.9 12 1028 9 1.2 24 2880 18 2.4 Single-Coil Latch Type at 20C Nominal Coil Voltage (Vdc) Coil Resistance () 10 % Must Operate Voltage (Vdc) Must Release Voltage (Vdc) 90 2.25 2.25 4.5 202.5 3.38 3.38 5 250 3.75 3.75 6 360 4.5 4.5 9 810 6.75 6.75 12 1440 9 9 24 5760 18 18 3 Double-Coil Latch Type (Can not be driven by revese polarity for reverse operation.) Nominal Coil Voltage (Vdc) 3 4.5 5 6 9 12 24 Note 4 Must Operate Voltage (Vdc) Coil Resistance () 10 % at 20C Must Release Voltage (Vdc) S 64.3 2.25 - R 64.3 - 2.25 S 145 3.38 - R 145 - 3.38 S 178 3.75 - R 178 - 3.75 S 257 4.5 - R 257 - 4.5 S 579 6.75 - R 579 - 6.75 S 1028 R 1028 - 9 S 4114 R 4114 - 18 9 - 18 - Test by pulse voltage S : Set coil (pin No.1... + , pin No.5... - ) R : Reset coil (pin No.10... + , pin No.6... - ) The latch type relays should be initalized at appointed position before using, and should be enegized to specific polanity by a bone polabity to avoid wrong operation. Any special coil requirement, please contact NEC for availability. DATA SHEET ER0002EJ4V0DS00 EC2 SERIES TYPICAL PERFORMANCE DATA SWITCHING CAPACITY 1 0.5 0.4 0.3 50 Coil Temperarure Rise (C) DC Load (resistive) AC Load (resistive) 2 Switching Current (A) COIL TEMPERATURE RISE 0.273 A 0.2 40 30 20 10 0 30 100 100 200 300 400 250 V 200 Applied Power (mW) 220 V Switching Voltage (V) Operate Time or Bounce Time at Operate (ms) OPERATE TIME Operate Time 3 Bounce Time Operate 2 1 0 100 200 300 400 500 RELEASE TIME WITHOUT DIODE 2 RELEASE TIME WITH DIODE Release Time 1 Bounce Time at Release 0 100 200 300 400 500 Release Time or Bounce Time at Release (ms) Release Time or Bounce Time at Release (ms) Applied Power (mW) 3 Release Time 2 Bounce Time at Release 1 0 Applied Power (mW) 100 200 300 400 500 Applied Power (mW) RUNNING SPECIFICATIONS (Noload) Sample : EE2-5 n=10 Load : None 1000 Operate Voltage Release Voltage Contact Resistance(m) Operate Voltage or Release Voltage(V) 5 4 3 2 1 0 1 Temperature : 85C Drive : 5 Vdc, 10 Hz 5% duty 2 3 4 10 6 Number of Operations(x10 operations) 500 Make contact Break contact 300 200 100 50 30 20 10 0 DATA SHEET ER0002EJ4V0DS00 1 2 3 5 10 6 Number of Operations(x10 operations) 5 EC2 SERIES BREAKDOWN VOLTAGE Sample : EC2-5 (a) Between Open Contacts (n = 10 pcs) (a) Between Adjacent Contacts 10 Appearance Appearance 10 5 0 (n = 10 pcs) 0.5 1.0 5 0 1.5 2.0 3.0 2.5 Breakdown voltage (kV) Breakdown voltage (kV) (a) Between Coil and Contacts (n = 25 pcs) Appearance 10 5 0 1.5 2.5 2.0 Breakdown voltage (kV) +40 +30 +20 +10 0 -10 -20 -30 -40 Max. Min. II III IV V VI +40 +30 +20 +10 0 -10 -20 -30 -40 Max. Min. I Layout ON ON Layout I OFF Layout II III IV V VI Layout ON OFF ON OFF Layout III ON OFF ON OFF ON OFF Layout V 6 OFF II 2.54 2.54 I Drift of Release Voltage (%) Drift of Operate Voltage (%) MAGNETIC INTERFERENCE Layout IV Sample Layout VI DATA SHEET ER0002EJ4V0DS00 Mounting Layout (mm) EC2 SERIES PACKAGE Dimensions of Relay Tube (Unit : mm) 35 pieces / Tube Material : Polyvinyl chloride (auti-static treated) 543 + -1 15.5 + - 0.3 (4.8) (0.5 t) 11.9 + - 0.3 (2.4) ( ) Reference Outline of Package Rubber stopper (Red) Rubber stopper (Green) Index Mark GUIDE TO APPLICATIONS 1. When connecting coils, refer to the pin configuration to prevent misoperation or malfunction. 2. The latch type relay should be initialized at the appointed position (set or reset position) when using, and should be energized or deenergized to the specified polarity to avoid wrong operations by reversed contact state. 3. Soldering should be done at 250 C within 10 sec. 4. Ultrasonic cleaning is not recommended to keep reliable contact performance. Alcohol based solvents are available as proper solvents. 5. Minimum contact load of the relay is 10 mV, 10 A. This value is a reference value in the resistance load. Minimum capacity changes depending on swiching frequency and environment temperature and the load. DATA SHEET ER0002EJ4V0DS00 7 EC2 SERIES No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its electronic components, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC electronic component, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and antifailure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product.