Branche Connecteurs Offshore
■Underwater applications
■Explosion proof
■Hermetically sealed
9316 series
Summary
9316
1Introduction
2Presentation
3Technical characteristics
4Synopsis
5Part-numbering system
6-7 Arrangements
7Mechanical keyway
8Hermetic receptacles
9Plugs
9-10 Protective caps
11 Accessories
12 Mating and unmating dimensions - Mounting style
13 Thermo-shrink sleeves - Gaskets
14-15 Contacts and tooling
Introduction
9316
1
■Application
The 9316 connectors have been designed for signal or
power links down to 7500 meters and in explosive envi-
ronments.
They are available in the following types :
●Hermetically sealed receptacles and feedthrues,
●Explosion-proof (as per EN 50014).
●Waterproof, 150 bars (2175 psi) - 9316 series, (her-
metic receptacles only)
●Waterproof, 750 bars (10875 psi) - 9306 series,
(Consult us)
■Typical applications
●Underwater control systems,
●Wellheads
●Submarines,
●ROV,
●Platforms,
●Loading buoys,
●Mines.
The DEUTSCH 9316 series has been designed to withs-
tand the most severe environments in marine and off-
shore applications down to 1500 or 7500 metres under-
water.
A special care was taken concerning :
●Easy handling,
●Mechanical stress,
●Use in polluted environments.
●Use in hazardous areas.
We have particulary studied the mechanical strength,
the elastomers selection and the suitability of the
accessories for the most commonly used cables.
This series benefits from advanced technologies in glass
to metal sealing and resistance to high pressures.
The 9316 series cover most requirements for on board
or underwater use :
●Signal, control
●High frequency,
●Medium and high power.
To guarantee the quality of these products, DEUTSCH
is equiped with conventional and special testing faci-
lities dedicated to :
●Mechanical resistance,
●Ageing,
●Helium test,
●High pressure test.
Also, a specialized team is at customers disposal to
study and achieve the wiring and testing of the 9316
connectors in our facilities or on site.
■General points
■Design features
The shells are made of stainless steel. The coupling rings are made of marine bronze.
In all cases, connectors in the 9316 series are scoop-proof ; a keying system is available in each size.
The inserts include one part in thermo-setting plastic, and two parts in rubber silicone.
Contacts are crimp type (except for hermetic connectors and some power arrangements).
Hermetic receptacles and feedthrues are fitted whith ferro-nickel contacts sealed into a glass disc. They are pla-
ted with gold over nickel.
The hermetic connectors withstand the pressure given in both directions (safety factor : 2P). Sealing of all her-
metic connectors is tested by heli-test.
■Explosion-Proof connectors
The 9316 series (see shell types certified pages 4 and 5) meet the requirements of the relevant European stan-
dard EN 50014, EN 50018 and have received the following agreement :
L.C.I.E. certificate n° 98.E0009 U.
Protection mode : Explosion-Proof envelope (EN 50018),
Gas group : Groupe II B,
Temperature class : T6 (layout 121-901, see note page 7).
Presentation
9316
2
1Coupling ring to be tightened with a spanner,
2Anti-friction washer allowing a constant coupling torque,
3Plug/receptacle sealing granted by o’ring and anti-extrusion gasket,
4Shell keying system,
5Anti-rotation system with teeth at the rear of the plug, allowing
a secure tightening and clamping of the accessories,
6Rotation blocking screws after mating
Technical characteristics
9316
3
■Mechanical
Shell :Stainless steel AISI 316 L passivated
Coupling ring :Marine bronze UA9 NFE-C 321
Insert (plug/in line receptacle) :Thermo-setting resin, silicone elastomer
These inserts meet requirements of MIL-H 5606
Insert (hermetic receptacle) :Glass
Contact (plug/in line receptacle) :
Crimp type # 20, 16, 12 and coax : rear insertion and
front extraction
Crimp type and solder type size 8
Crimp, solder or terminal type size 6, 4, 0, 150 mm2, 300 mm2
Contact (hermetic receptacle) :Iron nickel (or copper, mode A810), solder or terminal
(size 0, 150 mm2)
Protection :Gold over nickel
Endurance :500 mating and unmating cycles
Contact retention force :After 10 insertion and extraction operations :
Size 20 : 7 daN mini
Size 16, 12, 8 : 11,2 daN mini
Hermeticity :Individual heli-test ; leakage inferior to 0,28 mm3/hour at 1 bar
differential pressure
■Climatics
Working temperature :Standard connectors : -55° C to + 125° C
Explosion proof connectors : -55° C to + 85° C
■Electrical
Dielectric withstanding voltage
At sea level :Service 1 : 1500 V A.C.
Service 2 : 2300 V A.C.
Power : see page 7
Insulation resistance :Superior to 5000 MΩat 25° C and 65 % relative humidity
Maximum current rating per contact :Size 20 : 5 A. max. Size 4 : 60/100 A. max.
Size 16 : 10 A. max. Size 0 : 120/200 A. max.
Size 12 : 17 A. max. 150 mm2:400 A. max.
Size 8 : 33 A. max. 300 mm2:600 A. max.
-20°C to +100°C (connector warming considered)
Explosion proof connectors HT : -20°C to +190°C (connector warming considered)
Synopsis
9316
4
ACCESSORIESPLUGSIN LINE RECEPTACLE
HERMETICALLY SEALED RECEPTACLES
Backnut
Straight for braid termination
and thermo-shrink boot
EEx
Straight for braid
termination and overmoulding
PROTECTIVE CAPS
PROTECTIVE CAPS
HERMETIC FEEDTHRU
02 A
25H
31H
51H
61H
07 B
07 BC
A
RE
CE
RM
CM
GM
Elbow for braid termination and
thermo-shrink boot
EEx
Elbow for braid
termination and overmoulding
Straight for braid
termination and double overmoulding
Standard plug
EEx
Square flange
Jam nut
EEx
Square flange
EEx
Jam nut
EEx
For plug
For plug with cable
Explosion proof plug
EEx
17 A
27 A
Plug quick release
37 A
For receptacle
25 B
For receptacle with cable
For receptacle explosion-proof
EEx
25 BC
45 BC
Part-numbering system
9316
5
9316 27 A 19 12 PN * ***
UNDERWATER
CONNECTOR KEYWAY
N : Normal
X : Special position
* : Other, consult us
MODIFICATION NUMBER
1A : Less accessory (types 02, 17,
27, 37)
A 108 : Plug inserts mirror marking
(mandatory for hermetic
feedthru)
A 810 : Hermetic receptacle, copper
contact, Availability see pages
10 and 11
A 5743: 1 A + A 108
PRESSURE RANGE
150 bars (2175 psi) : 16 .
750 bars (10875 psi) : 06*
(* Consult us)
SHELL TYPE
In line receptacle - EEx : 02
Plug : 17
Plug - EEx : 27
Plug quick release : 37
Square flange receptacle : 25
Jam nut receptacle - EEx : 31
Square flange receptacle - EEx : 51
Feedthru - EEx : 61
SEALED VERSION
02, 17, 27, 37, 51 : Type A
HERMETIC VERSION
25, 31, 51, 61 : Type H
ARRANGEMENTS
See pages 6 and 7
SHELL SIZE
9306 : Consult us
9316 : 07, 12, 19, 27, 37, 61, 121
--
SUFFIX FOR CONTACT
For arrangements with # 8 contacts
only (19-93, 37-19, 61-21) :
8: Power contacts
*: Coax contacts, (consult us)
CONTACT TYPE
P : Pin contact (receptacles)
S : Socket contact (plugs)
: Arrangements 121-901 and 121-905
*
*
MANUFACTURER
DEUTSCH
Arrangements
9316
6
Arrangement 07-0
7 contacts size 20
Service 1
Arrangement 07-93
3 contacts size 16
Service 2
Arrangement 12-0
12 contacts size 20
Service 1
Arrangement 19-0
19 contacts size 20
Service 1
Arrangement 19-12
12 contacts size 16
Service 1
Arrangement 19-93
3 contacts size 8 or coax
Service 2
Arrangement 27-0
27 contacts size 20
Service 1
Arrangement 27-2
14 contacts size 16
Service 2
Arrangement 37-2
24 contacts size 16
Service 1
Arrangement 37-3
12 contacts size 12
Service 1
Arrangement 37-19
13 contacts size 20
6 contacts size 8 or coax
Service 1
Arrangement 61-0
61 contacts size 20
Service 1
Arrangement 61-21
12 contacts size 8 or coax
service 1
Arrangement 12-93
3 contacts size 12
Service 2
Male insert receptacle front view or female insert plug, wiring side view.
Arrangement 19-7
7 contacts size 12
Service 2
Arrangement 37-0
37 contacts size 20
Service 1
Arrangement 121-0
121 contacts size 20
Service 1
Arrangement 61-14
37 contacts size 16
Service 1
Service 1 : Service voltage 250 VAC
Service 2 : Service voltage 650 VAC
Arrangements
9316
7
Male insert viewed from front face or female insert, wiring side view.
Arrangement 121-904 .
4 contacts size 0
Arrangement 121-901 .
1 x 300m2
Key Key
Key
Keying
position X
Normal
keying position
Arrangement 121-905 .
5 contacts size 4
U - V - W - Y - Z : Available
for some other shell sizes,
please consult us..
Hermetic receptacles not available
Modification A 810 (Hermetic, copper contact) only available
Modification A 810 (Hermetic, copper contact), available.
Nota : Voltage rating is test voltage. Other arrangements, consult us.
*
**
Arrangement 61-901 .
1 x 150 mm2
Arrangement 27-901 .
1 contacts size 0 Arrangement 61-903 .
3 contacts size 4 Arrangement 61-904
4 contacts size 4
Receptacle front view
Version Rating Service
A Sealed 3500 VRMS 1250 VAC 200 A
H Hermetic 3500 VRMS 1250 VAC 120 A
H... A810 2500 VRMS 750 VAC 200 A
Hermetic
Version Rating Service
A Sealed 5000 VRMS 2000 VAC 400 A
H Hermetic Not available
H... A810 5000 VRMS 2000 VAC 400 A
Hermetic
Version Rating Service
A Sealed 3500 VRMS 1250 VAC 100 A
H Hermetic 3500 VRMS 1250 VAC 60 A
H... A810 2500 VRMS 750 VAC 100 A
Hermetic
Version Rating Service
A Sealed 3500 VRMS 1250 VAC 100 A
H Hermetic 3500 VRMS 1250 VAC 60 A
H... A810 Not available
Hermetic
Version Rating Service
A Sealed 5000 VRMS 2000 VAC 600 A
H Hermetic
H... A810
Hermetic
Version Rating Service
A Sealed 3500 VRMS 1250 VAC 200 A
H Hermetic Not available
H... A810 2500 VRMS 750 VAC 200 A
Hermetic
Version Rating Service
A Sealed 3000 VRMS 1000 VAC 100 A
H Hermetic
H... A810
Hermetic
Not available
EExd T5 for current ≤600 A
Not available
■Mechanical keyway
Hermetic receptacles
9316
8
TYPE 25H TYPE 51H
TYPE 31H TYPE 61H
8,10 max. 7 to 61
10,10 max. 121 33,60 max. 7 to 61
48,60 max. 121
45,60 max. 7 to 61
62,60 max. 121 67,70 max.
13,20 max. 33,50 (# 7 to 61)
48,50 (# 121)
Ø 5,50 - 07-12-19
Ø 6,50 - 27-37-61-121
Countersinking Ø 8,60 - 07-12-19
Ø 10,60 - 27-37-61-121
66,10 max. 7 to 61
81,10 max. 121
28,10 max. 7 to 61
41,10 max. 121
28,10 max. 7 to 61
31,10 max. 121
8,10 max. 7 to 61
10,10 max. 121 8,10 max. 7 to 61
10,10 max. 121
Ø 5,50 - 07-12-19
Ø 6,50 - 27-37-61-121
134,10 max.
■Square flange - TYPES 25H - 51H
■Jam nut - TYPES 31H - 61H
A
Reference A F Reference
max.
9316-31H 07-**-P* 51,00 29 9316-61H 07-**-PP*
9316-31H 12-**-P* 52,00 31 9316-61H 12-**-PP*
9316-31H 19-**-P* 55,00 34 9316-61H 19-**-PP*
9316-31H 27-**-P* 69,00 41 9316-61H 27-**-PP*
9316-31H 37-**-P* 74,00 46 9316-61H 37-**-PP*
9316-31H 61-**-P* 80,00 53 9316-61H 61-**-PP*
9316-31H 121-**-P* 95,00 67 9316-61H 121-**-PP*
A
Reference B B1 C F G G 1 Reference
max. MAX. max.
9316-25H 07-**-P* 38,50 41,50 29,00 29 20,00 20,00 9316-51H 07-**-P*
9316-25H 12-**-P* 39,50 42,50 30,00 31 23,00 23,00 9316-51H 12-**-P*
9316-25H 19-**-P* 41,50 44,50 32,00 34 26,00 26,00 9316-51H 19-**-P*
9316-25H 27-**-P* 53,50 56,50 40,00 41 30,00 30,00 9316-51H 27-**-P*
9316-25H 37-**-P* 57,50 60,50 44,00 46 34,50 34,50 9316-51H 37-**-P*
9316-25H 61-**-P* 62,50 65,50 49,00 53 43,50 43,50 9316-51H 61-**-P*
9316-25H 121-**-P* 73,50 73,50 60,00 67 55,00 55,00 9316-51H 121-**-P*
Contact over passing
# 20 3,60 max.
# 16 5,30 max.
# 12 4,05 max.
# 8 8,75 max.
Coax. Consult us
Power data sheet
Contact
available on request
Contact over passing
# 20 3,60 max.
# 16 5,30 max.
# 12 4,05 max.
# 8 8,75 max.
Coax. consult us
Power data shee
Contacts
available on request
Contact over passing
# 20 3,60 max.
# 16 5,30 max.
# 12 5,60 max.
# 8 7,60 max.
Coax. consult us
Power data shee
Contacts
available on request
■In line receptacle -TYPE 02A
In line receptacle / Plugs
9316
9
STANDARD
17A EXPLOSION-PROOF
27A QUICK RELEASE
37A
214, 00 ±2 mm
78 max.
About 4 mm unlocking stroke
to release
■Plugs - TYPES 17A - 27A - 37A
Reference A L F
max. max.
9316-02 A 07-** P* 1A 31,20 92,50 29
9316-02 A 12-** P* 1A 33,20 92,50 31
9316-02 A 19-** P* 1A 36,20 92,50 34
9316-02 A 27-** P* 1A 43,20 92,50 41
9316-02 A 37-** P* 1A 48,20 92,50 46
9316-02 A 61-** P* 1A 55,20 92,50 53
9316-02 A 121-** P* 1A 69,20 122,50 67
Reference A A1 L
max. max. max.
9316 ** A 07-** S* 1A 42,20 51,00 72,20
9316 ** A 12-** S* 1A 44,20 53,00 72,20
9316 ** A 19-** S* 1A 47,20 56,00 72,20
9316 ** A 27-** S* 1A 54,20 63,00 72,20
9316 ** A 37-** S* 1A 59,20 68,00 72,20
9316 ** A 61-** S* 1A 66,20 75,00 72,20
9316 ** A 121-** S* 1A 80,20 88,00 87,20
Protection caps
9316
10
A
Reference A F G L1 Reference
max. mini. max.
9316-07 B 07 31,20 29 22,50 200 9316-07 BC 07
9316-07 B 12 33,20 31 25,50 200 9316-07 BC 12
9316-07 B 19 36,20 34 28,90 200 9316-07 BC 19
9316-07 B 27 43,20 41 33,70 200 9316-07 BC 27
9316-07 B 37 48,20 46 36,80 200 9316-07 BC 37
9316-07 B 61 55,20 53 44,50 200 9316-07 BC 61
9316-07 B 121 69,20 67 58,10 200 9316-07 BC 121
A
Reference A G L1 Reference
max. mini. max.
9316-25 B 07 42,20 30,40 200 9316-25 BC 07
9316-25 B 12 44,20 32,00 200 9316-25 BC 12
9316-25 B 19 47,20 34,80 200 9316-25 BC 19
9316-25 B 27 54,20 41,60 200 9316-25 BC 27
9316-25 B 37 59,20 47,80 200 9316-25 BC 37
9316-25 B 61 66,20 55,40 200 9316-25 BC 61
9316-25 B 121 80,20 71,20 200 9316-25 BC 121
Reference A G L1
max. mini. max.
9316-45 BC 07 42,20 30,40 200
9316-45 BC 12 44,20 32,00 200
9316-45 BC 19 47,20 34,80 200
9316-45 BC 27 54,20 41,60 200
9316-45 BC 37 59,20 47,80 200
9316-45 BC 61 66,20 55,40 200
9316-45 BC 121 80,20 71,20 200
WITHOUT FASTENING CABLE
25 B WITH FASTENING CABLE
25 BC
WITH FASTENING CABLE
54,20 max. 7 to 61
69,10 max. 121
54,20 max. 7 to 61
69,10 max. 121
WITHOUT FASTENING CABLE
07 B WITH FASTENING CABLE
07 BC
48,20 max. 7 to 61
63,20 max. 121
■Cap for plug - TYPES 07 B - 07 BC
■Cap for receptacle - TYPES 25 B - 25 BC
■Explosion-proof cap for receptacle - TYPE 45 BC
Reference G J L L1 P R
max. mini. max. max. max. max.
640-0337-07 34,90 16,45 72,00 54,25 30,30 72,20
640-0337-12 37,80 19,25 72,00 54,25 33,30 72,20
640-0337-19 42,60 22,25 72,00 54,25 36,30 72,20
640-0337-27 45,80 27,75 72,00 54,25 41,70 72,20
640-0337-37 53,80 31,05 72,00 54,25 45,00 72,20
640-0337-61 57,40 38,45 72,00 54,25 53,00 72,20
640-0337-95 69,70 45,30 86,00 67,00 60,60 87,20
Accessories
9316
11
A
RE
CE
RM
CM
GM
Ø for cable
Ø for cable
Ø for cable
Ø for cable
Ø for cable
* Consult us
* Consult us
* Valid for all types, all nuts
* Consult us
EExd
EExd
■Backnut
■Straight for braid termination and double overmoulding
■Elbow for braid termination and overmoulding
■Straight for braid termination and overmoulding
■Elbow for braid termination and thermo shrink boot
■Straight for braid termination and thermo shrink boot
Reference G L1 R
max. mini. max.
087-0004-07 24,50 4,80 72,20
087-0004-12 27,10 4,80 72,20
087-0004-19 30,80 4,80 72,20
087-0004-27 35,55 4,80 72,20
087-0004-37 38,70 4,80 72,20
087-0004-61 45,90 4,80 72,20
087-0004-95 56,90 4,80 87,20
Tightening
torque.
* mN
20
22
25
28
32
37
45
A
Reference G J J1 L L1 P R
max. mini. max. max. max. max. max.
640-0180-07 34,90 16,45 10,80 85,20 67,25 30,30 72,20
640-0180-12 37,80 19,25 12,80 85,20 67,25 33,30 72,20
640-0180-19 42,60 22,25 14,80 85,20 67,25 36,80 72,20
640-0180-27 45,80 27,75 17,80 85,20 67,45 41,70 72,20
640-0180-37 53,80 31,05 19,80 85,20 67,45 45,00 72,20
640-0180-61 57,40 38,45 22,80 85,20 67,45 53,00 72,20
640-0180-95 * * * * * * *
Reference G J L L1 P R T
mini. max. max. max. max. max.
640-0335-07 34,90 16,45 73,45 56,00 30,30 72,20 96,50
640-0335-12 37,80 19,25 76,40 58,95 33,30 72,20 98,05
640-0335-19 42,60 22,25 79,80 62,35 36,80 72,20 99,80
640-0335-27 45,80 27,75 85,45 67,80 41,70 72,20 102,95
640-0335-37 53,80 31,05 88,65 71,00 45,00 72,20 106,60
640-0335-61 57,40 38,45 96,35 78,70 53,00 72,20 108,60
640-0335-95 * * * * * * *
Reference G J L L1 P R T
max. mini. max. max. max. max. max.
640-0334-07 34,90 15,75 63,50 45,75 28,40 72,20 61,15
640-0334-12 37,80 18,55 66,20 48,45 31,20 72,20 62,20
640-0334-19 42,60 22,35 69,80 52,05 34,30 72,20 65,35
640-0334-27 45,80 24,90 74,80 57,05 38,30 72,20 67,55
640-0334-37 53,80 29,50 78,10 60,35 42,30 72,20 68,00
640-0334-61 57,40 37,40 85,35 67,60 49,40 72,20 72,10
640-0334-95 * * * * * *
Reference G J L L1 P R
max. mini. max. max. max. max.
640-0336-07 34,90 16,45 88,70 70,95 30,45 72,20
640-0336-12 37,80 19,25 88,70 70,95 33,45 72,20
640-0336-19 42,60 22,25 88,70 70,95 36,95 72,20
640-0336-27 45,80 27,75 91,90 73,95 41,85 72,20
640-0336-37 53,80 31,05 91,90 73,95 45,15 72,20
640-0336-61 57,40 38,45 95,00 77,05 53,15 72,20
640-0336-95 69,70 45,30 115,00 96,15 60,60 87,20
A
22 max.
Mating and unmating
Mounting style
9316
12
MATED
UNMATTED
IMPORTANT NOTE : The surface roughness on the equipments, should be 0.4 - 0.8 micron.
A bearing face of 1.6 micron max. is tolerated.
1 dia. Ø 4,8 stud shells 07 to 19
1 dia. Ø 5,8 stud shells 27 to 121
Ø M 5 Size 7 to 19
Ø M 6 Size 27 to 121
Assembly in smooth hole
(not EExd)
Chamfered
0,5 at 45° Chamfered
0,7 at 20°
4+ 0,2
-- 0
24 + 0,2
-- 0
Roughness
< 1,6 < 1,6
*Mini wall thickness 15
*for explosion-proof application
*EExd : ISO thread, F class, H6, 8 mm minimum.
Type 31H Type 61H
**
■Square flange receptacle - TYPES 25 - 51 H
■Jam nut receptacle and feedthru - TYPES 31 H - 61 H
Assembly in smooth
Assembly
in
Shell hole (Not EExd) tapped hole
P max. P mini. P1 max.
9316-31 H .20 5 -
9316-61 H ** .60 25 70
9316-61 H 121 50 25 60
Size
CFPich H Tightening
*** torque mN
07 24,50 29 150 30,30 70
12 25,00 31 150 32,30 75
19 26,50 34 150 35,30 80
27 33,00 41 200 42,30 90
37 35,50 46 200 47,30 100
61 38,50 53 200 54,30 120
121 46,00 67 250 68,30 145
±0,2 + 0
-- 0,2
Size
CG H
max. 25H 51H
07 29,00 20,00 20,40 20,00
12 30,00 23,00 23,40 23,00
19 32,00 26,00 26,40 26,00
27 40,00 30,00 30,40 30,00
37 44,00 34,50 34,90 34,50
61 49,00 43,50 43,90 43,50
121 60,00 55,00 55,40 55,00
+ 0
-- 0,2
±0,10 + 0,075
-- 0
Size
07 12 19 27 37 61 121
Tightening torque mN 50 55 60 60 70 80 110
Size
K
max.
7 to 61 33,20
121 48,20
Assembly in tapped hole
(EExd)
Accessories
9316
13
DEUTSCH recommends :
On hermetic or standard receptacles, lubrication of the coupling O'rings (inside the receptacles) after about 50
mating/unmating operations. We recommend silicon grease.
■Gaskets and counter - Gasket for shell and accessories
■Thermo-shrink sleeve
12 33456
Size O’ring for O’ring for O’ring for O’ring for Counter-gasket O’ring for O’ring for accessory
Type 61 H Types 31-61 H Type 25 H Type 51 H for receptacles receptacles stainless
07 103-0003-20-A817 103-0003-25-A817 103-0003-19-A817 103-0003-19-A817 103-0021-16 103-0003-16-A010 103-0003-17-A817
12 103-0003-21-A817 103-0003-26-A817 103-0003-20-A817 103-0003-20-A817 103-0021-17 103-0003-17-A010 103-0003-19-A817
19 103-0003-23-A817 103-0003-28-A817 103-0003-22-A817 103-0003-22-A817 103-0021-19 103-0003-19-A010 103-0003-21-A817
27 103-0003-28-A817 103-0003-34-A817 103-0003-25-A817 103-0003-25-A817 103-0021-23 103-0003-23-A010 103-0003-24-A817
37
103-0003-31-A817 103-0003-37-A817 103-0003-27-A817 103-0003-27-A817 103-0021-26 103-0003-26-A010 103-0003-26-A817
61
103-0003-35-A817 103-0003-41-A817 103-0003-33-A817 103-0003-33-A817 103-0021-30 103-0003-30-A010 103-0003-31-A817
121
103-0003-44-A817 103-0003-50-A817 103-0003-42-A817 103-0009-30-A817 103-0021-38 103-0003-38-A010 103-0003-38-A817
Size
Sleeve
reference
07 086-0104-06
12 086-0104-06
19 086-0104-06
27 086-0104-07
37 086-0104-07
61 086-0104-08
121 086-0104-08
Contacts and Tooling
9316
14
#Crimp barrel
Index Reference Type AWG wire Section mm2Ø sheath
contacts Ø mini.
047-0894-20 P
without 1,30 18 to 24 0,22 to 0,93
047-0893-20 S
047-1022-20 P
*0,49 26 to 30 0,055 to 0,15 1,52 to 2,54
047-1023-20 S
047-1024-20 P
*2,50 16 to 18 0,93 to 1,34
047-1025-20 S
047-0894-16 P
without 1,68 16 to 18 0,93 to 1,34
047-0893-16 S
047-1022-16 P
*1,30 18 to 24 0,22 to 0,93 2,66 to 3,42
047-1023-16 S
047-1024-16 P
*2,17 12 to 14 1,91 to 3,18
047-1025-16 S
047-0894-12 P
without 2,52 12 to 14 1,91 to 3,18
047-0893-12 S
047-1022-12 P
*1,30 18 to 24 0,22 to 0,93 3,80 to 4,95
047-1023-12 S
047-1024-12 P
*1,96 14 to 18 0,93 to 1,91
047-1025-12 S
047-0894-08 P
84,70810
047-0893-08 S
047-1329-08 P
87 3,46 10 5,30 4,30 to 5,50
047-1330-08 S
047-1325-08 P
88 4,52 8 8,98
047-1326-08 S
Standard contacts supplied with the connector
*: Special contacts, to be ordered separately
20
16
12
8
CONTACTS CABLE
Stripping length
4 to 5 mm
●
■Coaxial contacts and tooling
Please, consult us
●
●
●
●
Contacts and Tooling
9316
15
Reference Reference Reference Locator Reference Reference
057-0461-11 057-0503-21 057-0473-60
006-0893-20 057-0463-12 057-0591-32 057-0479-60
057-0461-11 057-0503-21 057-0472-60
057-0472-60
092-1057-16 057-0461-11 057-0503-21 057-0473-60 057-0478-60
057-0471-60
057-0471-60
092-1056-12 057-0461-11 057-0503-21 057-0473-60 057-0477-60
057-0472-60
Solder
047-1052-08 057-0474-60 057-0480-60
057-0585-11
CRIMPING TOOLCRIMPING TOOLCRIMPING TOOL EXTRACTION TOOLINSERTION TOOL
Rear insertion tool Front insertion tool
Connector
rear face
FILLER PLUGS
Notes
9316
Connecteurs Electriques Deutsch
17, rue Lavoisier z.i. n° 2 B.P. 117 27091 EVREUX CEDEX 9 (FRANCE)
Tél.: +33 (0)2 32 23 57 00 - Fax : +33 (0)2 32 23 58 00 - Telex : 770848F
Web : www.compagnie-deutsch.com - E-mail : bco@compagnie-deutsch.com
Printed in France by Connecteurs Electriques DEUTSCH /Evreux Réf.: CC 640-22 A Edition Octobre 1999
■Linear downhole mateable connectors
■Linear power wet mateable connectors
■Signal wet mateable connectors
■Splash zone mateable connectors
■Customized connectors and services
Other Products
