CLD-CT995.005 PRODUCT FAMILY DATA SHEET Cree(R) PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW PRODUCT DESCRIPTION FEATURES SMD LEDs is packaged in the industry * Size (mm):3.2 x 2.7 standard package. These LEDs have * Color and Typical Dominant Wavelength: Blue (470nm) Green (527nm) high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under architectural lighting application conditions. APPLICATIONS * Channel Letter * Architectural Lighting * Luminous Intensity (mcd) CLM4B-BKW:(450 - 900) CLM4B-GKW:(2240 - 4500) * Lead-Free * RoHS Compliant Its wide viewing angle makes these LEDs ideally suited for channel letter, or architectural lighting applications. The flat top emitting surface makes it easy for these LEDs to mate with WWW.CREE.COM/HB light pipes. Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW ABSOLUTE MAXIMUM RATINGS (TA = 25C) Items Color Symbol Absolute Maximum Rating Unit Blue/Green IF 35 mA Blue/Green IFP 100 mA Blue/Green VR 5 V Blue PD 133 mW Green PD 129.5 mW Operation Temperature Blue/Green Topr -40 ~ +100 C Storage Temperature Blue/Green Tstg -40 ~ +100 C Junction Temperature Blue/Green TJ 110 C Blue RTHJA 350 C/W Green RTHJA 450 C/W Blue RTHJS 200 C/W Green RTHJS 300 C/W Forward Current Peak Forward Current Note Reverse Voltage Power Dissipation Junction/Ambient Junction/Solder Point Note: Pulse width 0.1 msec, duty 1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25C) Characteristics Forward Voltage Reverse Current Dominant Wavelength Luminous Intensity Color Symbol Condition Unit Typical Maximum Blue VF IF = 30 mA V Minimum 3.1 3.8 Green VF IF = 30 mA V 3.0 3.7 Blue/Green IR VR = 5 V A 10 Blue D IF = 30 mA nm 460 470 475 Green D IF = 30 mA nm 520 527 535 Blue IV IF = 30 mA mcd 450 650 Green IV IF = 30 mA mcd 2240 3200 Note: Continuous reverse voltage can cause LED damage. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW INTENSITY BIN LIMIT (IF = 30 mA) Blue (CLM4B-BKW) Green (CLM4B-GKW) Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) Ua 450 560 Xb 2240 2800 Ub 560 710 Ya 2800 3550 Va 710 900 Yb 3550 4500 Tolerance of measurement of luminous intensity is 10%. COLOR BIN LIMIT (IF = 30 mA) Blue (CLM4B-BKW) Bin Code Min.(nm) Max.(nm) Green (CLM4B-GKW) Bin Code Min.(nm) Max.(nm) B3 460 465 G7 520 525 B23 462.5 467.5 G23 522.5 527.5 B4 465 470 G8 525 530 B45 467.5 472.5 G45 527.5 532.5 B5 470 475 G9 530 535 Tolerance of measurement of dominant wavelength is 1 nm. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW ORDER CODE TABLE* Luminous Intensity (mcd) Dominant Wavelength Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Blue CLM4B-BKW-CUaVa353 450 900 B3 460 B5 475 Blue CLM4B-BKW-CUbVa453 560 900 B4 465 B5 475 Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Green CLM4B-GKW-CXbYb793 2240 4500 G7 520 G9 535 Green CLM4B-GKW-CYaYb793 2800 4500 G7 520 G9 535 Luminous Intensity (mcd) Dominant Wavelength Notes: 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the "Cree LED Lamp Reliability Test Standards" document #1 for reliability test conditions. 3. Please refer to the "Cree LED Lamp Soldering & Handling" document #2 for information about how to use this LED product safely. #1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf #2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW REFLOW SOLDERING * * * The CLM4B-BKW GKW is rated as a MSL 5a product. The recommended floor life out of bag is 24hrs. The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO. : 13 Temperature Melting-point Pre-heat Soak Reflow Cooling Time Use all SMD besides LP6-NPP1-01-N1 Use only with CLM4B-BKW GKW Solder = Sn63-Pb37 Solder = Lead-free Solder Average ramp-up rate = 4C/s max. Average ramp-up rate = 4C/s max Preheat temperature = 150C ~200C Preheat temperature = 100C ~150C Preheat temperature = 150C ~200C Preheat 100s Preheat time = time 120s = max Preheat time = 100s max. Average ramp-up rate = 4C/s max max. Ramp-down rate = 6C/s Ramp-down rate =max 6C/s max. Peak temperature = 235C=max Peak temperature 230C Ramp-down rate = 6C/s max. max. Peak temperature = 250C max. Time within 5C of actual Peak Temperature = 10s max Time within 5C of actual Peak Temperature = 10s max. Duration above 217C is 45s max Duration above 183C is 80s max. Only use LP6-NPP1-01-N1 Time within 5C of actual Peak Temperature = 10s max. Duration above 217C is 80s max. [13] Solder = Low Lead-free Average ramp-up rate = 3C/s max. Preheat temperature = 130C ~170C Preheat time = 120s max. Ramp-down rate = 6C/s max. Peak temperature = 213C max. Time within 3C of actual Peak Temperature = 25s max. Duration above 200C is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details. 7.0 Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2.6 8 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW Document No.: CREE-05-005 Rev. NO. : 16 NOTES * pick up SMD products during the process of SMT production . If handling is necessary, it should take careful to pick up these The following twoismethods necessary : The packaging sizes of these SMD products areproducts. very small and the resin still softare after solidification. Users are required to handle with care. Never touch the resin surface of SMD products. * To avoid damaging the product's surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method necessary: Fig. 1a:isFor Small Top SMD Fig. 1b: For Mini side 0.8mm SMD For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products figure size for reference : a.) Circular Nozzle: inner diameter: O1.8mm+/-0.05mm, outer diameter: O2.3mm+/-0.05mm. b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED. Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of S All devices, equipment and machinery must be properly grounded. It is recommended to perform electrical test to screen out ESD failures at final inspection. It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED applicatio current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 9 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW PACKAGING * * * * * The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2000 pcs per reel. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10