New Product VT2080S, VIT2080S Vishay General Semiconductor Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.46 V at IF = 5 A FEATURES TMBS (R) TO-220AB * Trench MOS Schottky technology TO-262AA * Low forward voltage drop, low power losses K * High efficiency operation * Solder bath temperature 275 C max. 10 s, per JESD 22-B106 * AEC-Q101 qualified 2 3 1 1 VT2080S 2 VIT2080S 3 * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC * Halogen-free according to IEC 61249-2-21 definition PIN 1 PIN 2 PIN 1 PIN 2 PIN 3 CASE PIN 3 K TYPICAL APPLICATIONS For use in high frequency DC/DC converters, switching power supplies, freewheeling diodes, OR-ing diode, and reverse battery protection. PRIMARY CHARACTERISTICS IF(AV) 20 A VRRM 80 V IFSM 150 A VF at IF = 20 A 0.70 V TJ max. 150 C MECHANICAL DATA Case: TO-220AB and TO-262AA Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL VT2080S VIT2080S UNIT Maximum repetitive peak reverse voltage VRRM 80 V Maximum average forward rectified current (fig. 1) IF(AV) 20 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 150 A dV/dt 10 000 V/s TJ, TSTG - 55 to + 150 C Voltage rate of change (rated VR) Operating junction and storage temperature range Document Number: 89240 Revision: 30-Nov-10 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product VT2080S, VIT2080S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL IF = 5 A IF = 10 A TA = 25 C IF = 20 A Instantaneous forward voltage per diode VF (1) IF = 5 A IF = 10 A TA = 125 C IF = 20 A VR = 80 V Reverse current per diode TA = 25 C TA = 125 C IR (2) TYP. MAX. UNIT 0.52 - 0.61 - 0.80 0.92 0.46 - 0.54 - 0.70 0.78 30 700 A 20 35 mA V Notes (1) Pulse test: 300 s pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance VT2080S VIT2080S 1.8 RJC UNIT C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N TO-220AB VT2080S-M3/4W TO-262AA VIT2080S-M3/4W (1) TO-220AB VT2080SHM3/4W TO-262AA VIT2080SHM3/4W (1) UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.88 4W 50/tube Tube 1.45 4W 50/tube Tube 1.88 4W 50/tube Tube 1.45 4W 50/tube Tube Note (1) AEC-Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 89240 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 30-Nov-10 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product VT2080S, VIT2080S Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) Instantaneous Reverse Current (mA) Average Forward Current (A) 24 Resistive or Inductive Load 20 16 12 8 4 0 0 25 75 50 100 150 175 10 TA = 125 C 1 TA = 100 C 0.1 TA = 25 C 0.01 0.001 20 30 40 50 60 80 70 90 100 Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics D = 0.5 D = 0.3 Transient Thermal Impedance (C/W) Percent of Rated Peak Reverse Voltage (%) 18 D = 0.8 D = 0.2 16 14 D = 0.1 D = 1.0 12 10 8 T 6 4 2 D = tp/T tp 0 0 4 8 12 16 20 24 10 Junction to Case 1 0.1 0.01 0.1 1 10 100 Average Forward Current (A) t - Pulse Duration (s) Fig. 2 - Forward Power Dissipation Characteristics Fig. 5 - Typical Transient Thermal Impedance 10 000 Junction Capacitance (pF) 100 Instantaneous Forward Current (A) TA = 150 C Case Temperature (C) 20 Average Power Loss (W) 125 100 TA = 150 C TA = 125 C 10 TA = 100 C 1 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 1000 100 TA = 25 C 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 10 0.1 1 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Junction Capacitance Document Number: 89240 Revision: 30-Nov-10 100 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product VT2080S, VIT2080S Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) 0.105 (2.67) 0.095 (2.41) 0.035 (0.90) 0.028 (0.70) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) TO-262AA 0.185 (4.70) 0.175 (4.44) 0.411 (10.45) MAX. 30 (TYP.) (REF.) 0.250 (6.35) MIN. 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) K 0.950 (24.13) 0.920 (23.37) 1 PIN 2 0.510 (12.95) 0.470 (11.94) 0.350 (8.89) 0.330 (8.38) 3 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.104 (2.65) 0.096 (2.45) www.vishay.com 4 0.401 (10.19) 0.381 (9.68) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.022 (0.56) 0.014 (0.35) 0.205 (5.20) 0.195 (4.95) For technical questions within your region, please contact one of the following: Document Number: 89240 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 30-Nov-10 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000