LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
D2-kV ESD Protection for:
− LM224K, LM224KA
− LM324K, LM324KA
− LM2902K, LM2902KV, LM2902KAV
DWide Supply Ranges
− Single Supply ...3 V to 32 V
(26 V for LM2902)
− Dual Supplies . . . +1.5 V to +16 V
(+13 V for LM2902)
DLow Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
DCommon-Mode Input Voltage Range
Includes Ground, Allowing Direct Sensing
Near Ground
DLow Input Bias and Offset Parameters
Input Offset Voltage ...3 mV Typ
A Versions ...2 mV Typ
Input Offset Current ...2 nA Typ
Input Bias Current...20 nA Typ
A Versions . . . 15 nA Typ
DDifferential Input Voltage Range Equal to
Maximum-Rated Supply Voltage ...32 V
(26 V for LM2902)
DOpen-Loop Differential Voltage
Amplification . . . 100 V/mV Typ
DInternal Frequency Compensation
description/ordering information
These devices consist of four independent
high-gain frequency-compensated operational
amplifiers that are designed specifically to operate
from a single supply over a wide range of voltages.
Operation from split supplies also is possible if the
difference between the two supplies is 3 V to 32 V
(3 V to 26 V for the LM2902), and VCC is at least
1.5 V more positive than the input common-mode
voltage. The low supply-current drain is
independent of the magnitude of the supply
voltage.
Applications include transducer amplifiers, dc amplification blocks, and all the conventional
operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For
example, the LM124 can be operated directly from the standard 5-V supply that is used in digital systems and
provides the required interface electronics, without requiring additional ±15-V supplies.
Copyright 2010, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN−
1IN+
VCC
2IN+
2IN−
2OUT
4OUT
4IN−
4IN+
GND
3IN+
3IN−
3OUT
LM124 . . . D, J, OR W PACKAGE
LM124A ...J OR W PACKAGE
LM224, LM224A, LM224K, LM224KA ...D OR N PACKAGE
LM324, LM324K . . . D, N, NS, OR PW PACKAGE
LM324A . . . D, DB, N, NS, OR PW PACKAGE
LM324KA . . . D, N, NS, OR PW PACKAGE
LM2902 . . . D, N, NS, OR PW PACKAGE
LM2902K . . . D, DB, N, NS, OR PW PACKAGE
LM2902KV, LM2902KAV . . . D OR PW PACKAGE
(TOP VIEW)
3 2 1 20 19
910111213
4
5
6
7
8
18
17
16
15
14
4IN+
NC
GND
NC
3IN+
1IN+
NC
VCC
NC
2IN+
LM124, LM124A . . . FK PACKAGE
(TOP VIEW)
1IN−
1OUT
NC
3IN− 4IN−
2IN−
2OUT
NC
NC − No internal connection
3OUT 4OUT
On products compliant to MIL-PRF-38535, all parameters are
tested unless otherwise noted. On all other products,
production processing does not necessarily include testing
of all parameters.
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010
2POST OFFICE BOX 655303 DALLAS, TEXAS 75265
ORDERING INFORMATION{
TA
VIOmax
AT 25°C
MAX
TESTED
VCC
PACKAGE}ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP (N)
Tube of 25
LM324N LM324N
PDIP (N) Tube of 25 LM324KN LM324KN
Tube of 50 LM324D
Reel of 2500 LM324DR LM324
SOIC (D) Reel of 2500 LM324DRG3
LM324
SOIC
(D)
Tube of 50 LM324KD
LM324K
7mV
30 V
Reel of 2500 LM324KDR LM324K
7 mV 30 V Reel of 2000 LM324NSR LM324
SOP (NS) Tube of 50 LM324KNS
LM324K
SOP
(NS)
Reel of 2000 LM324KNSR LM324K
Tube of 90 LM324PW
L324
TSSOP (PW)
Reel of 2000 LM324PWR L324
TSSOP (PW) Tube of 90 LM324KPW
L324K
0°Cto70°C
Reel of 2000 LM324KPWR L324K
0°C to 70°C
PDIP (N)
Tube of 25 LM324AN LM324AN
PDIP (N) Tube of 25 LM324KAN LM324KAN
Tube of 50 LM324AD
LM324A
SOIC (D)
Reel of 2500 LM324ADR LM324A
SOIC (D) Tube of 50 LM324KAD
LM324KA
Reel of 2500 LM324KADR LM324KA
3mV
30 V
Reel of 2000 LM324ANSR LM324A
3 mV 30 V SOP (NS) Tube of 50 LM324KANS
LM324KA
SOP
(NS)
Reel of 2000 LM324KANSR LM324KA
SSOP (DB) Reel of 2000 LM324ADBR LM324A
Tube of 90 LM324APW
L324A
TSSOP (PW)
Reel of 2000 LM324APWR L324A
TSSOP (PW) Tube of 90 LM324KAPW
L324KA
Reel of 2000 LM324KAPWR L324KA
PDIP (N)
Tube of 25
LM224N LM224N
PDIP (N) Tube of 25 LM224KN LM224KN
5mV
30 V
Tube of 50 LM224D
LM224
5 mV 30 V
SOIC (D)
Reel of 2500 LM224DR LM224
SOIC (D) Tube of 50 LM224KD
LM224K
25°Cto85°C
Reel of 2500 LM224KDR LM224K
−25°C to 85°C
PDIP (N)
Tube of 25 LM224AN LM224AN
PDIP (N) Tube of 25 LM224KAN LM224KAN
3mV
30 V
Tube of 50 LM224AD
LM224A
3 mV 30 V
SOIC (D)
Reel of 2500 LM224ADR LM224A
SOIC (D) Tube of 50 LM224KAD
LM224KA
Reel of 2500 LM224KADR LM224KA
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010
3
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
ORDERING INFORMATION (CONTINUED)
TA
VIOmax
AT 25°C
MAX
TESTED
VCC
PACKAGEORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP (N)
Tube of 25 LM2902N LM2902N
PDIP (N) Tube of 25 LM2902KN LM2902KN
Tube of 50 LM2902D
LM2902
SOIC (D)
Reel of 2500 LM2902DR LM2902
SOIC (D) Tube of 50 LM2902KD
LM2902K
Reel of 2500 LM2902KDR LM2902K
Reel of 2000 LM2902NSR LM2902
26 V SOP (NS) Tube of 50 LM2902KNS
LM2902K
7 mV
26
V
SOP
(NS)
Reel of 2000 LM2902KNSR LM2902K
−40°C to 125°C
SSOP (DB)
Tube of 80 LM2902KDB
L2902K
40 C
to
125 C
SSOP (DB) Reel of 2000 LM2902KDBR L2902K
Tube of 90 LM2902PW
L2902
TSSOP (PW)
Reel of 2000 LM2902PWR L2902
TSSOP (PW) Tube of 90 LM2902KPW
L2902K
Reel of 2000 LM2902KPWR L2902K
32 V
SOIC (D) Reel of 2500 LM2902KVQDR L2902KV
32 V TSSOP (PW) Reel of 2000 LM2902KVQPWR L2902KV
2mV
32 V
SOIC (D) Reel of 2500 LM2902KAVQDR L2902KA
2 mV 32 V TSSOP (PW) Reel of 2000 LM2902KAVQPWR L2902KA
CDIP (J) Tube of 25 LM124J LM124J
CFP (W) Tube of 25 LM124W LM124W
5 mV 30 V LCCC (FK) Tube of 55 LM124FK LM124FK
55°C to 125°C
5
mV
30
V
SOIC (D)
Tube of 50 LM124D
LM124
−55°C to 125°CSOIC (D) Reel of 2500 LM124DR LM124
CDIP (J) Tube of 25 LM124AJ LM124AJ
2 mV 30 V CFP (W) Tube of 25 LM124AW LM124AW
LCCC (FK) Tube of 55 LM124AFK LM124AFK
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
symbol (each amplifier)
+
IN−
IN+
OUT
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010
4POST OFFICE BOX 655303 DALLAS, TEXAS 75265
schematic (each amplifier)
To Other
Amplifiers
6-µA
Current
Regulator
VCC
OUT
GND
IN−
IN+
100-µA
Current
Regulator
50-µA
Current
Regulator
COMPONENT COUNT
(total device)
Epi-FET
Transistors
Diodes
Resistors
Capacitors
1
95
4
11
4
6-µA
Current
Regulator
ESD protection cells - available on LM324K and LM324KA only
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010
5
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
LM2902 ALL OTHER
DEVICES UNIT
Supply voltage, VCC (see Note 1) ±13 or 26 ±16 or 32 V
Differential input voltage, VID (see Note 2) ±26 ±32 V
Input voltage, VI (either input) −0.3 to 26 −0.3 to 32 V
Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C,
VCC 15 V (see Note 3) Unlimited Unlimited
D package 86 86
DB package 96 96
Package thermal impedance, θJA (see Notes 4 and 5) N package 80 80 °C/W
Package
thermal
impedance,
θJA
(see
Notes
4
and
5)
NS package 76 76
C/W
PW package 113 113
FK package 5.61
Package thermal impedance, qJC (see Notes 6 and 7) J package 15.05 °C/W
Package
thermal
impedance,
qJC
(see
Notes
6
and
7)
W package 14.65
C/W
Operating virtual junction temperature, TJ150 150 °C
Case temperature for 60 seconds FK package 260 °C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds J or W package 300 300 °C
Storage temperature range, Tstg −65 to 150 −65 to 150 °C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
2. Differential voltages are at IN+, with respect to IN−.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
6. Maximum power dissipation is a function of TJ(max), qJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ(max) − TC)/qJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
7. The package thermal impedance is calculated in accordance with MIL-STD-883.
ESD protection
TEST CONDITIONS TYP UNIT
Human-Body Model LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV ±2 kV
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010
6POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONST
A
LM124
LM224
LM324
LM324K UNIT
TEST
CONDITIONS
TA
MIN TYP §MAX MIN TYP §MAX
UNIT
V
Input offset voltage
V
CC
= 5 V to MAX
,
25°C 3 5 3 7
mV
VIO Input offset voltage
V
CC =
5
V
to
MAX
,
VIC = VICRmin, VO = 1.4 V Full range 7 9 mV
I
Input offset current
V14V
25°C 2 30 2 50
nA
IIO Input offset current VO = 1.4 V Full range 100 150 nA
I
Input bias current
V14V
25°C −20 −150 −20 −250
nA
IIB Input bias current VO = 1.4 V Full range −300 −500 nA
25°C
0 to 0 to
V
Common-mode
V5VtoMAX
25°C
0
to
VCC − 1.5
0
to
VCC − 1.5
V
VICR
Common
-
mode
input voltage range VCC = 5 V to MAX
Full range
0 to 0 to V
input
voltage
range
Full range
0
to
VCC − 2
0
to
VCC − 2
RL = 2 k25°C VCC − 1.5 VCC − 1.5
V
Hi
g
h-level RL = 10 k25°C
V
VOH
High
-
level
output voltage
VMAX
RL = 2 kFull range 26 26 V
pg
VCC = MAX RL 10 kFull range 27 28 27 28
VOL
Low-level
output voltage RL 10 kFull range 5 20 5 20 mV
A
Large-signal
differential voltage
V
CC
= 15 V
,
V
O
= 1 V to 11 V
,
25°C 50 100 25 100
V/mV
AVD differential voltage
amplification
V
CC =
15
V
,
V
O =
1
V
to
11
V
,
RL 2 kFull range 25 15
V/mV
CMRR Common-mode
rejection ratio VIC = VICRmin 25°C 70 80 65 80 dB
k
Supply-voltage
rejection ratio
25°C
65
100
65
100
dB
kSVR rejection ratio
(VCC /VIO)
25°C 65 100 65 100 dB
VO1/V
O2
Crosstalk
attenuation f = 1 kHz to 20 kHz 25°C 120 120 dB
VCC = 15 V,
V1V
Source
25°C −20 −30 −60 −20 −30 −60
CC
VID = 1 V,
VO = 0
Source
Full range −10 −10
mA
IOOutput current VCC = 15 V,
V1V
Sink
25°C 10 20 10 20
mA
O
p
CC
VID = −1 V,
VO = 15 V
Sink
Full range 5 5
VID = −1 V, VO = 200 mV 25°C 12 30 12 30 µA
IOS
Short-circuit
output current
VCC at 5 V,
GND at −5 V
VO = 0, 25°C±40 ±60 ±40 ±60 mA
Supply current
VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2
ICC
Supply current
(four amplifiers) VCC = MAX,
VO = 0.5 VCC, No load Full range 1.4 3 1.4 3 mA
All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for
testing purposes is 26 V for LM2902 and 30 V for the others.
Full range is −55°C to 125°C for LM124, −25°C to 85°C for LM224, and 0°C to 70°C for LM324.
§All typical values are at TA = 25°C.
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010
7
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
TEST CONDITIONS
T
LM2902 LM2902V
UNIT
PARAMETER TEST CONDITIONSTA
MIN TYP §MAX MIN TYP §MAX UNIT
V5Vt
Non-A-suffix 25°C 3 7 3 7
V
Input offset voltage
VCC = 5 V to
MAX
,
Non
-
A
-
suffix
devices Full range 10 10
mV
VIO Input offset voltage
MAX
,
VIC = VICRmin,
V14V
A-suffix 25°C 1 2 mV
IC ICR
VO = 1.4 V
A
-
suffix
devices Full range 4
VIO/TInput offset voltage
temperature drift RS = 0 Full range 7µV/°C
I
Input offset current
V14V
25°C 2 50 2 50
nA
IIO Input offset current VO = 1.4 V Full range 300 150 nA
IIO/TInput offset current
temperature drift Full range 10 pA/°C
I
Input bias current
V14V
25°C −20 −250 −20 −250
nA
IIB Input bias current VO = 1.4 V Full range −500 −500 nA
25°C
0 to 0 to
V
Common-mode
V5VtoMAX
25°C
0
to
VCC − 1.5
0
to
VCC − 1.5
V
VICR
Common
-
mode
input voltage range VCC = 5 V to MAX
Full range
0 to 0 to V
input
voltage
range
Full range
0
to
VCC − 2
0
to
VCC − 2
RL = 2 k25°C
V
Hi
g
h-level RL = 10 k25°C VCC − 1.5 VCC − 1.5
V
VOH
High
-
level
output voltage
VMAX
RL = 2 kFull range 22 26 V
pg
VCC = MAX RL 10 kFull range 23 24 27
VOL
Low-level
output voltage RL 10 kFull range 5 20 5 20 mV
A
Large-signal
differential voltage
V
CC
= 15 V
,
V
O
= 1 V to 11 V
,
25°C 25 100 25 100
V/mV
AVD differential voltage
amplification
V
CC =
15
V
,
V
O =
1
V
to
11
V
,
RL 2 kFull range 15 15
V/mV
CMRR Common-mode
rejection ratio VIC = VICRmin 25°C 50 80 60 80 dB
k
Supply-voltage
rejection ratio
25°C
50
100
60
100
dB
kSVR rejection ratio
(VCC /VIO)
25°C 50 100 60 100 dB
VO1/V
O2
Crosstalk
attenuation f = 1 kHz to 20 kHz 25°C 120 120 dB
VCC = 15 V,
V1V
S
25°C −20 −30 −60 −20 −30 −60
CC
VID = 1 V,
VO = 0
Source Full range −10 −10
mA
IOOutput current VCC = 15 V,
V1V
Sink
25°C 10 20 10 20
mA
CC
VID = −1 V,
VO = 15 V
Sink
Full range 5 5
VID = −1 V, VO = 200 mV 25°C 30 12 40 µA
IOS
Short-circuit
output current
VCC at 5 V,
GND at −5 V
VO = 0, 25°C±40 ±60 ±40 ±60 mA
Supply current
VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2
ICC
Supply current
(four amplifiers) VCC = MAX,
VO = 0.5 VCC, No load Full range 1.4 3 1.4 3 mA
All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for
testing purposes is 26 V for LM2902 and 32 V for LM2902V.
Full range is −40°C to 125°C for LM2902.
§All typical values are at TA = 25°C.
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS066TSEPTEMBER 1975 − MARCH 2010
8POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONST
A
LM124A LM224A LM324A,
LM324KA UNIT
PARAMETER
TEST
CONDITIONS
T
A
MIN TYP §MAX MIN TYP §MAX MIN TYP §MAX
UNIT
V
Input offset voltage
V
CC
= 5 V to 30 V, 25°C 2 2 3 2 3
mV
VIO Input offset voltage
VCC
=
5
V
to
30
V
,
VIC = VICRmin, VO = 1.4 V Full range 445mV
I
Input offset current
V14V
25°C 10 2 15 2 30
nA
IIO Input offset current VO = 1.4 V Full range 30 30 75 nA
I
Input bias current
V14V
25°C −50 −15 −80 −15 −100
nA
IIB Input bias current VO = 1.4 V Full range −100 −100 −200 nA
V
Common-mode input
V30 V
25°C0 to
VCC − 1.5
0 to
VCC − 1.5
0 to
VCC − 1.5
V
VICR
Common-mode
input
voltage range VCC = 30 V
Full range 0 to
VCC − 2
0 to
VCC − 2
0 to
VCC − 2
V
RL = 2 k25°C VCC − 1.5 VCC − 1.5 VCC − 1.5
VOH High-level output voltage
V30 V
RL = 2 kFull range 26 26 26 V
VOH
High level
output
voltage
VCC = 30 V RL 10 kFull range 27 27 28 27 28
V
VOL Low-level output voltage RL 10 kFull range 20 5 20 5 20 mV
A
Lar
g
e-si
g
nal differential V
CC
= 15 V, V
O
= 1 V to 11 V, 25°C 50 100 50 100 25 100
V/mV
AVD
Large-signal
differential
voltage amplification
VCC
=
15
V
,
VO
=
1
V
to
11
V
,
RL 2 kFull range 25 25 15 V/mV
CMRR Common-mode rejection ratio VIC = VICRmin 25°C 70 70 80 65 80 dB
kSVR
Supply-voltage rejection ratio
(VCC /VIO)25°C 65 65 100 65 100 dB
VO1/V
O2 Crosstalk attenuation f = 1 kHz to 20 kHz 25°C 120 120 120 dB
VCC = 15 V,
V1V
Source 25°C −20 −20 −30 −60 −20 −30 −60
VID = 1 V,
VO = 0
Source
Full range −10 −10 −10
mA
IOOutput current VCC = 15 V,
V1V
Sink
25°C 10 10 20 10 20
mA
VID = −1 V,
VO = 15 V
Sink
Full range 5 5 5
VID = −1 V, VO = 200 mV 25°C 12 12 30 12 30 µA
IOS Short-circuit output current VCC at 5 V, GND at −5 V,
VO = 0 25°C±40 ±60 ±40 ±60 ±40 ±60 mA
Supply current
VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2 0.7 1.2
ICC
Supply current
(four amplifiers) VCC = 30 V, VO = 15 V,
No load Full range 1.4 3 1.4 3 1.4 3 mA
All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified.
Full range is −55°C to 125°C for LM124A, −25°C to 85°C for LM224A, and 0°C to 70°C for LM324A.
§All typical values are at TA = 25°C.
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010
9
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
operating conditions, VCC = ±15 V, TA = 25°C
PARAMETER TEST CONDITIONS TYP UNIT
SR Slew rate at unity gain RL = 1 M, CL = 30 pF, VI = ±10 V (see Figure 1) 0.5 V/µs
B1Unity-gain bandwidth RL = 1 M, CL = 20 pF (see Figure 1) 1.2 MHz
VnEquivalent input noise voltage RS = 100 , VI = 0 V, f = 1 kHz (see Figure 2) 35 nV/Hz
VO
+
RL
CL
VI
VCC+
VCC−
Figure 1. Unity-Gain Amplifier
VO
+
100
VCC+
VCC−
RS
900
VI = 0 V
Figure 2. Noise-Test Circuit
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
5962-7704301VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
5962-9950403V9B ACTIVE XCEPT KGD 0 100 TBD Call TI N / A for Pkg Type
5962-9950403VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
77043012A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
7704301CA ACTIVE CDIP J 14 1 TBD Call TI Call TI
7704301DA ACTIVE CFP W 14 1 TBD Call TI Call TI
77043022A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
7704302CA ACTIVE CDIP J 14 1 TBD Call TI Call TI
7704302DA ACTIVE CFP W 14 1 TBD Call TI Call TI
JM38510/11005BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
LM124ADR OBSOLETE SOIC D 14 TBD Call TI Call TI
LM124AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
LM124AJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
LM124AJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
LM124AWB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
LM124D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM124DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM124DR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM124DRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM124FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
LM124J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
LM124JB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
LM124N OBSOLETE PDIP N 14 TBD Call TI Call TI
LM124W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
LM124WB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
LM224AD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM224ADE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224ADG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224ADR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM224ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM224D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224DE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224DR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224DRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224DRG3 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM
LM224DRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KAD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KADE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KADG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KADR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KADRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 3
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM224KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KAN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM224KANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM224KD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KDE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM224KN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM224KNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM224N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM224NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM2902D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902DE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902DR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902DRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902DRG3 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM
LM2902DRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 4
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM2902KAVQDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KAVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KAVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KAVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDB ACTIVE SSOP DB 14 80 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDBE4 ACTIVE SSOP DB 14 80 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDBG4 ACTIVE SSOP DB 14 80 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM2902KNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM2902KNSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KNSRE4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KNSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 5
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM2902KPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KVQDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902KVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM2902NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM2902NSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902NSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
LM2902PWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902PWRE4 ACTIVE TSSOP PW 14 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 6
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM2902PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM
LM2902PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2902QN OBSOLETE PDIP N 14 TBD Call TI Call TI
LM324AD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADBLE OBSOLETE SSOP DB 14 TBD Call TI Call TI
LM324ADBR ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM324ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM324ANSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ANSRE4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 7
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM324APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
LM324APWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324DE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324DR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324DRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324DRG3 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM
LM324DRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KADE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KADG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KADR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KADRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 8
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM324KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM324KANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM324KANSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KANSRE4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KANSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KAPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KDE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 9
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM324KNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM324KNSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KNSRE4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KNSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324KPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM324NE3 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU SN N / A for Pkg Type
LM324NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM324NSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324NSRE4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324NSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 10
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM324PWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM
LM324PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM324Y OBSOLETE DIESALE Y 0 TBD Call TI Call TI
M38510/11005BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF LM124, LM124-SP, LM124M, LM2902 :
PACKAGE OPTION ADDENDUM
www.ti.com 28-Aug-2012
Addendum-Page 11
Catalog: LM124, LM124
Automotive: LM2902-Q1
Enhanced Product: LM2902-EP
Military: LM124M, LM124M
Space: LM124-SP, LM124-SP
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Enhanced Product - Supports Defense, Aerospace and Medical Applications
Military - QML certified for Military and Defense Applications
Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
LM124DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM224ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM224ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM224DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM224DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM224KADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM224KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2902DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2902DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2902DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2902DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2902KAVQPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM2902KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2902KNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM2902KPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM2902KVQPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM2902NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM2902PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 1
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
LM2902PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM2902PWRG3 TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM2902PWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM324ADBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1
LM324ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324ADRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324ANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM324APWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM324APWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM324APWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM324DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324KADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324KANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM324KAPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM324KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM324KNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM324KPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM324NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM324PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM324PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM324PWRG3 TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM324PWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 2
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM124DR SOIC D 14 2500 367.0 367.0 38.0
LM224ADR SOIC D 14 2500 367.0 367.0 38.0
LM224ADR SOIC D 14 2500 333.2 345.9 28.6
LM224DR SOIC D 14 2500 367.0 367.0 38.0
LM224DRG4 SOIC D 14 2500 367.0 367.0 38.0
LM224KADR SOIC D 14 2500 367.0 367.0 38.0
LM224KDR SOIC D 14 2500 367.0 367.0 38.0
LM2902DR SOIC D 14 2500 333.2 345.9 28.6
LM2902DR SOIC D 14 2500 367.0 367.0 38.0
LM2902DRG4 SOIC D 14 2500 333.2 345.9 28.6
LM2902DRG4 SOIC D 14 2500 367.0 367.0 38.0
LM2902KAVQPWR TSSOP PW 14 2000 367.0 367.0 35.0
LM2902KDR SOIC D 14 2500 367.0 367.0 38.0
LM2902KNSR SO NS 14 2000 367.0 367.0 38.0
LM2902KPWR TSSOP PW 14 2000 367.0 367.0 35.0
LM2902KVQPWR TSSOP PW 14 2000 367.0 367.0 35.0
LM2902NSR SO NS 14 2000 367.0 367.0 38.0
LM2902PWR TSSOP PW 14 2000 364.0 364.0 27.0
LM2902PWR TSSOP PW 14 2000 367.0 367.0 35.0
LM2902PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 3
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM2902PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0
LM324ADBR SSOP DB 14 2000 367.0 367.0 38.0
LM324ADR SOIC D 14 2500 367.0 367.0 38.0
LM324ADRG4 SOIC D 14 2500 367.0 367.0 38.0
LM324ANSR SO NS 14 2000 367.0 367.0 38.0
LM324APWR TSSOP PW 14 2000 367.0 367.0 35.0
LM324APWR TSSOP PW 14 2000 364.0 364.0 27.0
LM324APWRG4 TSSOP PW 14 2000 367.0 367.0 35.0
LM324DR SOIC D 14 2500 333.2 345.9 28.6
LM324DR SOIC D 14 2500 367.0 367.0 38.0
LM324DRG4 SOIC D 14 2500 333.2 345.9 28.6
LM324DRG4 SOIC D 14 2500 367.0 367.0 38.0
LM324KADR SOIC D 14 2500 367.0 367.0 38.0
LM324KANSR SO NS 14 2000 367.0 367.0 38.0
LM324KAPWR TSSOP PW 14 2000 367.0 367.0 35.0
LM324KDR SOIC D 14 2500 367.0 367.0 38.0
LM324KNSR SO NS 14 2000 367.0 367.0 38.0
LM324KPWR TSSOP PW 14 2000 367.0 367.0 35.0
LM324NSR SO NS 14 2000 367.0 367.0 38.0
LM324PWR TSSOP PW 14 2000 364.0 364.0 27.0
LM324PWR TSSOP PW 14 2000 367.0 367.0 35.0
LM324PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0
LM324PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 4
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE
4040065 /E 12/01
28 PINS SHOWN
Gage Plane
8,20
7,40
0,55
0,95
0,25
38
12,90
12,30
28
10,50
24
8,50
Seating Plane
9,907,90
30
10,50
9,90
0,38
5,60
5,00
15
0,22
14
A
28
1
2016
6,50
6,50
14
0,05 MIN
5,905,90
DIM
A MAX
A MIN
PINS **
2,00 MAX
6,90
7,50
0,65 M
0,15
0°ā8°
0,10
0,09
0,25
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated