944-120-6000 - AMPHENOL FIBER OPTICS

Amphenol

One Piece FC Connectors & Adapters

SPECIFICATIONS

Connector Loss: 9/125 µm fibre, 0.19 dB typical

62.5/125 µm fibre, 0.21 dB typical

50/125 µm fibre, 0.14 dB typical

Return Loss: PC: Polish dependant

APC: -65dB max -68dB typical

Durability:<

0.11dB after 500 mating cycles

Operating Temperature:

-40°C to +85°C

Intermateability: Mechanically and optically intermateable

with NTT FC type products and conform

to JIS C 5970.

Amphe nol Australia P ty Ltd A.C.N. 008 730 925

2 Fiveways Blvd, Keysborough, 3173 Australia

Tel: +61 3 87 96 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http:// www.a mphenol.com.a u

IS: 0401

PART NO DESCRIPTION FIBRE

TYPE

944-601-5006 FC/PC, Singlemode 126µm, Zirconia PC ferrule SM

944-601-5306 FC/PC, Singlemode 126µm , Zirconia PC ferrule, High Performance Boot SM

944-601-5010 FC/PC, Multimode 128µm, Zirconia PC ferrule MM

944-611-5106 FC Connector Singlemode 126µm Zirconia PC ferrule Tunable High

Performance Boot SM

944-120-6000 FC Adapter, Flange Mount, Zirconia Ceramic Alignment Sleeve SM/MM

944-125-6003 FC Adapter, D-Hole, Feed Through, Zirconia Ceramic Alignment Sleeve SM/MM

954-944-5001 SC/FC Converting Adapter, Zirconia Ceramic Alignment Sleeve SM/MM

944-120-1014 FC Adapter, Captivated Dust Cap SM/MM

944-603-5006 FC/APC , Singlemode 126µm, Zirconia stepped ferrule SM

944-603-5606 FC/APC , Singlemode 126µm, Zirconia pre angled stepped ferrule SM

944-125-6004 FC/APC Adapter D-Hole Feed Through Zirconia Ceramic Alignment Sleeve SM/MM

NOTES

• All connectors available in with 125µm ferrules

• All connectors are supplied with 900µm and 3.0mm boots

• All adapters available with phosphor bronze alignment sleeves.

• Technical drawings available on request.

Amphenol

SPECIFICATIONS

Insertion Loss: 9/125 µm fibre , 0.3 dB maximum

62.5/125 µm fibre, 0.3 dB maximum

Return Loss: 9/125 µm, 50 dB typical

Durability: <0.2 dB change typical (500 matings)

Operating Temperature:

-40°C to +85 °C

The LC connector range is Bellcore, ANSI/EIA/TIA and

IEC compliant. The LC is an inherently reliable, simple

and well designed fibre optic interconnect product.

Small Form Factor (SFF) Connectors & Adapters

Amphe nol Australia P ty Ltd A.C.N. 008 730 925

2 Fiveways Blvd, Keysborough, 3173 Australia

Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au, http://www.amphenol.com.au

IS: 0401

MT-RJ Connectors & Adapters

SPECIFICATIONS

Insertion Loss: 9/125 µm fibre, 0.3 dB typical

62.5/125 µm fibre, 0.3 dB typical

Return Loss: 9/125 µm, 40 dB typical

Operating Temperature:

-40°C to +75 °C

Performance: Performance compliant with

ISO/IEC 11801, TIA/EIA 568A and

draft Detail Specification for Optical

Fibre Connectors.

FEATURES

• Half the size of duplex SC and ST style connectors

• Installable in conventional RJ-45 faceplates and has RJ-45 type latching mechanism

• Singlemode and multimode versions for existing and future network applications

• Single ferrule reduces the time and complication of assembly since both fibres can be installed and polished at the

same time.

• Allows for increased port density

• Rugged design, meets or exceeds industry standards, with no exposed fibres

LC Connectors & Adapters

FEATURES

• Audible latch to indicate proper mating

• Pull proof

• Well suited to high density application and easily duplexed

• Fits an RJ-45 footprint

Amphenol

SPECIFICATIONS

Insertion Loss: 9/125 µm fibre , 0.3 dB maximum

62.5/125 µm fibre, 0.3 dB maximum

Return Loss: Default Polish 9/125 µm, < 50 dB max

Ultra Polish 9/125 µm, < 55 dB max

Durability: <0.1 dB change typical (500 matings)

Operating Temperature:

-40°C to +75 °C

APPLICATIONS

CATV

Active device termination

Telecommunication networks

Small Form Factor (SFF) Connectors & Adapters

Amphe nol Australia P ty Ltd A.C.N. 008 730 925

2 Fiveways Blvd, Keysborough, 3173 Australia

Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au, http://www.amphenol.com.au

IS: 0401

MU Connectors & Adapters

FEATURES

• Free floating ferrule is independent of the backbone, so that a pull on the cable will not cause the ferrule to break

contact with a second ferrule in a connection

• Push-Pull mating

• The MU connector features a precision screw machined body and UL rated plastic housing and boot for

consistent performance and durability.

• Available in singlemode or multimode.

• Fully mateable with NTT-MU type products

• Tunable zirconia ceramic ferrule

• NTT and JIS compliant

SUPPORTING PRODUCT

• Adaptors

Simplex Patch Panel and Board mount

Duplex Patch Panel and Board mount

8-port Patch Panel and Board mount

• Hybrid Adaptors

MU-LC Adapter

MU-SC Adapter

• MU Backplane Connectors (MU-B)

• MU Backplane con nec tor housings

MU duplex printed circuit board housing

MU 8-port printed circuit board housing

MU duplex backpanel housing (2.4 or 3.2 mm thickness)

MU 8-port backpanel housing (2.4 or 3.2 mm thickness)

• MU Tools

A variety of tools are available to assist in the removal of MU connectors

MU duplex printed circuit board housing cleaning tool

MU 8-port printed circuit board housing cleaning tool

Amphenol

SPECIFICATIONS

Connector Loss: 9/125 µm fibre, 0.19 dB typical

62.5/125 µm fibre, 0.15 dB typical

Return Loss: PC < -55 dB

APC < -65 dB

Durability: < 0.20dB change after 500

mating cycles

Operating Temperature:

-40°C to +85 °C

Intermateability: Mechanically and optically

intermateable with NTT SC type

products and conform to JIS C 5973.

One Piece SC Connectors & Adapters

Amphe nol Australia P ty Ltd A.C.N. 008 730 925

2 Fiveways Blvd, Keysborough, 3173 Australia

Tel: +61 3 87 96 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http:// www.a mph enol.com.au

IS: 0401

PART NO DESCRIPTION FIBRE

TYPE

954-101-5006 SC/PC , Singlemode 126µm, Zirconia PC ferrule SM

954-101-5306 SC/PC , Singlemode 126µm, Zirconia PC ferrule, High Performance Boot SM

954-101-5010 SC/PC , M ultimode 128µm, Zirconia PC ferrule MM

954-101-5011 SC/PC , M ultimode 144µm, Zirconia PC ferrule MM

954-122-5002 SC A dapter, Multimode, Phosphor Bronze Alignment Sleeve MM

954-120-5000 SC A dapter, Zirconia Ceramic Alignm ent Sleeve SM /M M

954-120-5001 SC A dapter, Phosphor Bronze Alignm ent Sleeve SM /M M

954-944-5000 SC/FC C onverting Adapter, Phosphor Bronze Alignm en t Sleeve SM /M M

954-944-5001 SC/FC C onverting A dapter, Zirconia Ceramic Alignment S leeve SM /M M

954-953-5000 SC/ST C onverting Adapter, Zirconia Ceramic Alignm en t Sleeve SM /M M

954-953-5001 SC/ST C onverting Adapter, Phosphor Bronze Alignm ent S leeve SM /M M

954-103-5006 SC/AP C , Singlemode, 126µm , Zirconia ferrule SM

954-103-5606 SC/AP C , Singlemode, 126µm , Zirconia ferrule, Pre angled SM

954-120-5109 SC/AP C A dapter, Singlem ode, Zirconia Ceram ic Alignment sleeve SM

NOTES

• All connectors are available with 125µm ferrules

• All connectors are supplied with 900µm and 3.0mm boots

• Technical drawings available on request

Amphenol

SPECIFICATIONS

Connector Loss: 9/125 µm fibre, 0.19 dB typical

62.5/125 µm fibre, 0.21 dB typical

50/125 µm fibre, 0.14 dB typical

Durability: < 0.20dB change after 500

mating cycles

Operating Temperature:

-40°C to +85 °C

Intermateability: Conform to ANSI X3T9.3 SC

specifications and are intermateable.

SC Duplex Connecto rs & Adapters

Amphe nol Australia P ty Ltd A.C.N. 008 730 925

2 Fiveways Blvd, Keysborough, 3173 Australia

Tel: +61 3 87 96 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http:// www.a mphenol.com.a u

IS: 0401

PART NO DESCRIPTION FIBRE TYPE

954-101-5206 SC Duplex Connector S/mode 126∝m Zirconia PC Ferrule SM

954-101-5210 SC Duplex Connector M/mode 128∝m Zirconia PC Ferrule MM

954-101-5211 SC Duplex Connector M/mode 144∝m Zirconia PC Ferrule MM

954-122-5210 SC Duplex Adapter M/mode Phosphor Bronze Alignment Sleeve MM

954-953-5210 SC/ST Duplex Adapter M/mode Phosphor Bronze Alignment Sleeve MM

954-120-5200 SC Duplex Adapter S/mode Zirconia Ceramic Alignment Sleeve SM/MM

954-122-5201 SC Duplex Adapter S/mode Phosphor Bronze Alignment Sleeve SM/MM

954-953-5200 SC/ST Duplex Adapter S/mode Zirconia Ceramic Alignment Sleeve SM/MM

NOTES

• All connectors available with 125µm ferrules

• All connectors supplied with 3.0mm boots

• Technical drawings available on request

Amphenol

SPECIFICATIONS

Connector Loss: 9/125 µm fibre, 0.19 dB typical

62.5/125 µm fibre, 0.13 dB typical

50/125 µm fibre, 0.14 dB typical

100/140 µm fibre, 0.10 dB typical

Durability: < 0.10dB change after 1000 mating

cycles

Operating Temperature:

-40°C to +85 °C

Intermateability: Optically and mechanically

compatible with AT&T ST, STII

connectors and their functional

equivalents.

ST® Compatible Connectors & Adapters

Amphe nol Australia P ty Ltd A.C.N. 008 730 925

2 Fiveways Blvd, Keysborough, 3173 Australia

Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au, http://www.amphenol.com.au

ST® and ST II ® are registered trademarks of AT&T

IS: 0401

PART NO DESCRIPTI ON FI BRE

TYPE

953-101-5006 ST Connector, Singlemode 126µm, Zirco nia PC ferrule , Ye llow SM

953-101-5008 ST Connector, Singlemode 128µm, Zirco nia PC ferrule , Bl ue SM

953-101-5010 ST Connector, Multimode 128µm, Zirconia PC ferrule , Bl ack MM

953-101-5011 ST Connector, Multimode 144µm, Zirconi a PC fe rrule, Grey MM

953-122-5000 ST Adapter, Polymer Body , Phosphor Bronze Alignm ent Sleeve, Beige SM/MM

953-120-5000 ST Adapter, Polymer Body , Zi rc onia Cera mic Alignmen t Sl eeve, Blac k SM/MM

954-953-5000 SC-ST Converting Adapter, Zirconia Ceramic Alignment Sleeve SM/MM

954-953-5001 SC-ST Converting Adapter, Phosphor Bronze Alignment Sleeve SM/MM

NOTES

• Connector body and coupling nut are precision molded from a flame retardant, glass filled polymer.

• The connector body is colour coded to indicate singlemode or multimode and ferrule size

• All connectors available with 125µm ferrules

• All connectors are supplied with 900µm and 3.0mm boots

• Technical drawings available on request

Amphenol

SPECIFICATIONS

Connector Loss: 62.5/125 µm fibre, 0.35 dB typical

Durability: < 0.03dB change after 500

mating cycles

Operating Temperature:

-40°C to +85 °C

Intermateability: Optically and mechanically

compatible with AT&T ST, STII

connectors and their functional

equivalents.

ST® Compatible (s/steel ferrule) Connectors & Adapters

Amphe nol Australia P ty Ltd A.C.N. 008 730 925

2 Fiveways Blvd, Keysborough, 3173 Australia

Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au ht tp://www.amph enol.com.au

ST® and STII® are trade mark s of AT&T

IS: 0401

NOTES

• All connectors are supplied with 900µm and 3.0mm boots

• Custom hole sizes can be drilled to accommodate non standard fibres

• Technical drawings can be supplied on request

PART NO DESCRIPTION FIBR E

TYPE

953-102-5001 ST connector, polymeric body & Coupling Nut 128µm S/steel ferrule MM

953-102-5002 ST connector, polymeric body & Coupling Nut 144µm S/steel ferrule MM

953-102-5003 ST connector, polymeric body & Coupling Nut 231µm S/steel ferrule MM

953-102-5004 ST connector, polymeric body & Coupling Nut 436µm S/steel ferrule MM

951-102-5005 ST connector, polymeric body & Coupling Nut 641µm S/steel ferrule MM

953-102-5301 ST c onnector, metal body & Coupling Nut 128µm S/steel ferrule MM

953-102-5302 ST c onnector, metal body & Coupling Nut 144µm S/steel ferrule MM

953-102-5303 ST c onnector, metal body & Coupling Nut 231µm S/steel ferrule MM

Amphenol

SPECIFICATIONS

Connector Loss: 9/125 µm fibre, 0.19 dB typical

62.5/125 µm fibre, 0.13 dB typical

50/125 µm fibre, 0.14 dB typical

100/140 µm fibre, 0.10 dB typical

Durability: < 0.10dB after 1000 mating cycles

Operating Temperature:

-40°C to +85 °C

Intermateability: Optically and mechanically

compatible with AT&T ST, STII

connectors and their functional

equivalents.

ST II® Compatible Co nnectors & Adap ters

Amphe nol Australia P ty Ltd A.C.N. 008 730 925

2 Fiveways Blvd, Keysborough, 3173 Australia

Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info

henol . com.au htt

://www.am

henol.com.au

ST® and STII® are trade mark s of AT&T

IS: 0401

PART NO DESCRIPTION FIBRE TYPE

953-101-5306 ST Connector, Singlemode 126µm, Zirconia PC ferrule, Die Cast SM

953-101-5308 ST Connector, Singlemode 128µm, Zirconia PC ferrule, Die Cast SM

953-101-5310 ST Connector, Multimode 128µm, Zirconia PC ferrule, Die Cast MM

953-101-5311 ST Connector, Multimode 144µm, Zirconia PC ferrule, Die Cast MM

953-120-5003 ST Adapter, Di e Cast, Zirconia Ceramic Alignment Sleeve MM

953-122-5003 ST Adapter, Di e Cast, Phosphor Bronze Alignment Sleeve SM/MM

953-1061 ST Dust Cap and Chain -

NOTES

• All connectors available with 125µm ferrules

• Connectors supplied with 900µm and 3.0mm boots

• Technical drawing available on request