Heat Shrink Specifications: Approval category Standard Approval bodies Shrink ratio Shrink temperature Minimum operating temperature Maximum operating temperature : : : : : : : UL224 CSA, LR54949 UL 2:1 100C -55C 135C Specification Table Material Colour Dielectric Strength (kV/mm) Irradiated polyolefin Polyolefin Irradiated polyolefin Black 20 Unshrunk Diameter Fully Shrunk Diameter 1.6 0.8 3.2 1.6 4.8 2.4 SP48/RL/BLACK 6.4 3.2 SP64/RL/BLACK 9.5 4.7 12.7 6.3 19 9.5 1.6 0.8 SP16/1.2/BLACK 2.4 1.2 SP24/1.2/BLACK 3.2 1.6 4.8 2.4 6.4 3.2 9.5 4.7 12.7 6.3 19 9.5 SP190/1.2/BLACK 38.1 19 SP381/1.2/BLACK 50.8 25.4 SP508/1.2/BLACK 9.5 4.7 12.7 6.3 Flammability Rating External Length / Height (m) Reel Length (m) Part Number SP16/RL/BLACK 150 75 150 75 SP32/RL/BLACK SP95/RL/BLACK SP127/RL/BLACK 60 60 VW-1 SP190/RL/BLACK SP32/1.2/BLACK SP48/1.2BLACK SP64/1.2BLACK 1.2 - 5 SP95/1.2/BLACK SP127/1.2/BLACK SP95/5/BLACK SP127/5/BLACK Dimensions : Millimetres (Unless Specified) Page <1> 19/12/11 V1.1 Heat Shrink Specification Table Unshrunk Diameter Fully Shrunk Diameter Flammability Rating External Length / Height (m) 25.4 12.7 VW-1 5 Polyolefin 2.4 1.2 Irradiated polyolefin 6.4 3.2 Polyolefin 19 9.5 6.4 3.2 38.1 19 2.4 1.2 3.2 1.6 4.8 2.4 9.5 4.7 12.7 6.3 19 Material Colour Irradiated polyolefin Black Dielectric Strength (kV/mm) Clear Irradiated polyolefin Reel Length (m) Part Number SP254/5/BLACK SP24/1.2/CLEAR 1.2 - SP190/1.2/CLEAR SP64/5/CLEAR 5 - SP64/1.2/CLEAR SP381/5/CLEAR SP24/RL/CLEAR 150 150 SP32/RL/CLEAR SP48/RL/CLEAR SP95/RL/CLEAR 75 75 9.5 60 60 SP190/RL/CLEAR 38.1 19 30 30 SP381/RL/CLEAR 1.6 0.8 SP16/1.2/YELLOW 2.4 1.2 SP24/1.2/YELLOW 3.2 1.6 SP32/1.2/YELLOW 4.8 2.4 SP48/1.2/YELLOW 6.4 3.2 SP64/1.2/YELLOW 9.5 4.7 12.7 6.3 19 9.5 SP190/1.2/YELLOW 25.4 12.7 SP254/1.2/YELLOW 38.1 19 SP381/1.2/YELLOW Polyolefin 50.8 25.4 SP508/1.2/YELLOW Irradiated polyolefin 1.6 0.8 20 Polyolefin Yellow Irradiated polyolefin VW-1 1.2 5 - SP127/RL/CLEAR SP95/1.2/YELLOW SP127/1.2/YELLOW SP16/5/YELLOW Dimensions : Millimetres (Unless Specified) Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Pro-POWER is the registered trademark of the Group. (c) Premier Farnell plc 2011. Page <2> 19/12/11 V1.1