Q6004V4TP - Littelfuse [Teccor]

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

4 Amp Sensitive & Standard Triacs

Lxx04xx & Qxx04xx Series

Description

Main Features

4 Amp bi-directional solid state switch series is designed

for AC switching and phase control applications such as

motor speed and temperature modulation controls, lighting

controls, and static switching relays.

Sensitive type devices guarantee gate control in Quadrants

I & IV needed for digital control circuitry.

Standard type devices normally operate in Quadrants I & III

triggered from AC line.

Symbol Value Unit

IT(RMS) 4 A

VDRM /VRRM 400 to 1000 V

IGT (Q1) 3 to 25 mA

Absolute Maximum Ratings — Sensitive Triacs (4 Quadrants)

Symbol Parameter Value Unit

IT(RMS)

RMS on-state current

(full sine wave)

Lxx04Ly / Lxx04Dy TC = 85°C 4 A

Lxx04Ry / Lxx04Vy TC = 75°C

ITSM

Non repetitive surge peak on-state current

(full cycle, TJ initial = 25°C)

f = 50 Hz t = 20 ms 33 A

f = 60 Hz t = 16.7 ms 40

I2t I2t Value for fusing tp = 8.3 ms 6.6 A2s

di/dt Critical rate of rise of on-state current

(IG = 50mA with ≤ 0.1μs rise time) f = 120 Hz TJ = 110°C 50 A/μs

IGTM Peak gate trigger current tp ≤ 10 μs TJ = 110°C 1. 2 A

PG(AV) Average gate power dissipation TJ = 110°C 0.3 W

Tstg Storage temperature range -40 to 150 °C

TJOperating junction temperature range -40 to 110 °C

Note: xx = voltage, y = sensitivity

Schematic Symbol

MT2

MT1

Applications

Typical applications are AC solid-state switches, power

tools, home/brown goods and white goods appliances.

Sensitive gate Triacs can be directly driven by

microprocessor or popular opto-couplers/isolators.

Internally constructed isolated packages are offered for

ease of heat sinking with highest isolation voltage.

Features & Beneﬁts

• RoHS Compliant

• Glass – passivated

junctions

• Voltage capability up to

1000 V

• Surge capability up to

55 A

• Electrically isolated

“L-Package” is UL

recognized for 2500Vrms

• Solid-state switching

eliminates arcing or

contact bounce that

create voltage transients

• No contacts to wear out

from reaction of switching

events

• Restricted (or limited) RFI

generation, depending on

activation point of

sine wave

• Requires only a small gate

activation pulse in each

half-cycle

Agency Approval

Agency Agency File Number

®L Package : E71639

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

4 Amp Sensitive & Standard Triacs

Lxx04xx & Qxx04xx Series

Electrical Characteristics (TJ = 25°C, unless otherwise speciﬁed) — Sensitive Triac (4 Quadrants)

Symbol Test Conditions Quadrant Lxx04x3 Lxx04x5 Lxx04x6 Lxx04x8 Unit

IGT VD = 12V RL = 60 Ω

I – II – III MAX. 35510 mA

IV 3 5 10 20

VGT ALL MAX. 1. 3 V

VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C ALL MIN. 0.2 V

IHIT = 100mA MAX. 5 10 10 15 mA

dv/dt VD = VDRM Gate Open TJ = 100°C 400V TYP. 25 25 30 35 V/μs

600V 15 15 20 25

(dv/dt)c (di/dt)c = 2.16 A/ms TJ = 110°C TYP. 0.5 1 1 1 V/μs

tgt IG = 2 x IGT PW = 15μs IT = 5.6 A(pk) TYP. 2.8 3.0 3.0 3.2 μs

Absolute Maximum Ratings — Standard Triacs

Symbol Parameter Value Unit

IT(RMS)

RMS on-state current

(full sine wave)

Qxx04Ly / Qxx04Dy TC = 95°C 4 A

Qxx04Ry / Qxx04Vy TC = 85°C

ITSM

Non repetitive surge peak on-state current

(full cycle, TJ initial = 25°C)

f = 50 Hz t = 20 ms 46 A

f = 60 Hz t = 16.7 ms 55

I2t I2t Value for fusing tp = 8.3 ms 12.5 A2s

di/dt Critical rate of rise of on-state current

(IG = 50mA with ≤ 0.1μs rise time) f = 120 Hz TJ = 125°C 50 A/μs

IGTM Peak gate trigger current tp ≤ 10 μs;

IGT ≤ IGTM

TJ = 125°C 1. 2 A

PG(AV) Average gate power dissipation TJ = 125°C 0.3 W

Tstg Storage temperature range -40 to 150 °C

TJOperating junction temperature range -40 to 125 °C

Note: xx = voltage, y = sensitivity

Electrical Characteristics (TJ = 25°C, unless otherwise speciﬁed) — Standard Triac

Symbol Test Conditions Quadrant Qxx04x3 Qxx04x4 Unit

IGT VD = 12V RL = 60 Ω

I – II – III MAX. 10 25 mA

IV TYP. 25 50

VGT I – II – III MAX. 1. 3 1. 3 V

VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C ALL MIN. 0.2 0.2 V

IHIT = 200mA MAX. 20 30 mA

dv/dt

VD = VDRM Gate Open TJ = 125°C

400V

MIN.

40 75

V/μs

600V 30 50

800V 40

VD = VDRM Gate Open TJ = 100°C 1000V 50

(dv/dt)c (di/dt)c = 2.16 A/ms TJ = 125°C TYP. 2 2 V/μs

tgt IG = 2 x IGT PW = 15μs IT = 5.6 A(pk) TYP. 2.5 3.0 μs

Note: xx = voltage, x = package

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

4 Amp Sensitive & Standard Triacs

Lxx04xx & Qxx04xx Series

Static Characteristics (TJ = 25°C, unless otherwise speciﬁed)

Symbol Test Conditions Value Unit

VTM ITM = 5.6A tp = 380 µs MAX. 1.60 V

IDRM

IRRM

VDRM = VRRM MAX.

Lxx04xy

TJ = 25°C 400-600V 5 μA

TJ = 110°C 400-600V 200 μA

Qxx04xy

TJ = 25°C 400-1000V 10 μA

TJ = 125°C 400-800V 2

TJ = 100°C 1000V 3

Thermal Resistances

Symbol Parameter Value Unit

Rθ(J-C) Junction to case (AC)

L/Qxx04Dy 3.5

°C/W

L/Qxx04Ly 3.6

L/Qxx04Ry 3.6

L/Qxx04Vy 6.0

Rθ(J-A) Junction to ambient

L/Qxx04Ly 50

°C/W

L/Qxx04Ry 45

L/Qxx04Vy 70

Note: xx = voltage, x = package, y = sensitivity

Figure 2: Normalized DC Gate Trigger Current for

All Quadrants vs. Junction Temperature

Junction Temperature (TJ)- ºC

110 12585603510-40-40-65

4.0

0.0

Ratio of

IGT

IGT (TJ = 25°C)

1.0

2.0

3.0

Figure 1: Deﬁnition of Quadrants

MT2 POSITIVE

(Positive Half Cycle)

MT2 NEGATIVE

(Negative Half Cycle)

MT1

MT2

+ I GT

REF QII

MT1

IGT

GATE

MT2

REF

MT1

MT2

REF

MT1

MT2

REF

QIV

QIII

ALL POLARITIES ARE REFERENCED TO MT1

(-)

IGT

GATE

(+)

IGT -

IGT

GATE

(-)

IGT

GATE

(+)

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

4 Amp Sensitive & Standard Triacs

Lxx04xx & Qxx04xx Series

Figure 3: Normalized DC Holding Current

vs. Junction Temperature

Junction Temperature (TJ)- ºC

Ratio of

IH (TJ = 25°C)

110 12585603510-40-40-65

4.0

0.0

1.0

2.0

3.0

Figure 4: Normalized DC Gate Trigger Voltage for

All Quadrants vs. Junction Temperature

Junction Temperature (TJ)- ºC

Ratio of

VGT

VGT (TJ = 25°C)

110 12585603510-40-40-65

2.0

0.0

0.5

1.0

1.5

RMS On-State Current (IT(RMS)) - Amps

5.04.02.0 3.01. 00.0

0.0

Average On-State

Power Dissipation (PD(AV)) - Watts

2.0

4.0

CURRENT WAVE FORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

3.0

1.0

Figure 5: Power Dissipation (Typical)

vs. RMS On-State Current

Figure 6: Maximum Allowable Case Temperature

vs. On-State Current

RMS On-State Current (IT(RMS)) - Amps

6345210

Maximum Allowable

Case Temperature (TC) - °C

110

Lxx04Ly

Lxx04Dy

CURRENT WAVE FORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

CASE TEMPERATURE: Measured as shown

on Dimensional Drawing

100

105

Lxx04Vyz

Lxx04Ry

LXX04Vy

Figure 8: Maximum Allowable Ambient Temperature

vs. On-State Current

RMS On-State Current [IT(RMS)] - Amps

2.01.01.2 1.41.6 1.80.6 0.80.40.20.0

120

100

Maximum Allowable

Ambient Temperature (T

A) - °C

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

FREE AIR RATING – NO HEATSINK

L/Qxx04Vy

Qxx04Ly

Qxx04Ry

Lxx04Ly

Figure 7: Maximum Allowable Case Temperature

vs. On-State Current

RMS On-State Current (IT(RMS)) - Amps

6345210

Maximum Allowable

Case Temperature (TC) - °C

110

Lxx04Ly

Lxx04Dy

CURRENT WAVE FORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

CASE TEMPERATURE: Measured as shown

on Dimensional Drawing

100

105

Lxx04Vyz

Lxx04Ry

LXX04Vy

Note: xx = voltage, y = sensitivity

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

4 Amp Sensitive & Standard Triacs

Lxx04xx & Qxx04xx Series

Figure 9: On-State Current vs. On-State Voltage (Typical)

Positive or Instantaneous

On-State Voltage (VT) - Volts

1.81.61.41.21.00.80.6

Positive or Instantaneous

On-State Current (IT) - Amps

TJ = 25°C

110 100 1000

Surge Current Duration – Full Cycles

100

Peak Surge (Non-repetitive) On-State Current

TSM

) – Amps

Qxx04Ry

Qxx04Ly

Qxx04Dy

Qxx04Vy

Lxx04Ry

Lxx04Ly

Lxx04Dy

Lxx04Vy

Figure 10: Surge Peak On-State Current vs. Number of Cycles

Supply Frequency: 60Hz Sinusoidal

Load: Resistive

RMS On-State [IT(RMS)]: Max Rated Value at

Speciﬁc Case Temperature

Notes:

1. Gate control may be lost during and immediately

following surge current interval.

2. Overload may not be repeated until junction

temperature has returned to steady-state

rated value.

Note: xx = voltage, y = sensitivity

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

4 Amp Sensitive & Standard Triacs

Lxx04xx & Qxx04xx Series

Soldering Parameters

Reﬂow Condition Pb – Free assembly

Pre Heat

- Temperature Min (Ts(min))150°C

- Temperature Max (Ts(max))200°C

- Time (min to max) (ts)60 – 180 secs

Average ramp up rate (Liquidus Temp)

(TL) to peak 5°C/second max

TS(max) to TL - Ramp-up Rate 5°C/second max

Reﬂow - Temperature (TL) (Liquidus) 217°C

- Temperature (tL)60 – 150 seconds

Peak Temperature (TP)260°C +0/-5

Time within 5°C of actual peak

Temperature (tp)20 – 40 seconds

Ramp-down Rate 5°C/second max

Time 25°C to peak Temperature (TP)8 minutes Max.

Do not exceed 280°C

Environmental Speciﬁcations

Test Speciﬁcations and Conditions

AC Blocking MIL-STD-750, M-1040, Cond A Applied

Peak AC voltage @ 125°C for 1008 hours

Temperature Cycling

MIL-STD-750, M-1051,

100 cycles; -40°C to +150°C; 15-min

dwell time

Temperature/

Humidity

EIA / JEDEC, JESD22-A101

1008 hours; 320V - DC: 85°C; 85%

rel humidity

High Temp Storage MIL-STD-750, M-1031,

1008 hours; 150°C

Low-Temp Storage 1008 hours; -40°C

Thermal Shock

MIL-STD-750, M-1056

10 cycles; 0°C to 100°C; 5-min dwell

time at each temperature; 10 sec (max)

transfer time between temperature

Autoclave

EIA / JEDEC, JESD22-A102

168 hours (121°C at 2 ATMs) and

100% R/H

Resistance to

Solder Heat MIL-STD-750 Method 2031

Solderability ANSI/J-STD-002, category 3, Test A

Lead Bend MIL-STD-750, M-2036 Cond E

Physical Speciﬁcations

Terminal Finish 100% Matte Tin-plated

Body Material UL recognized epoxy meeting ﬂammability

classication 94V-0

Terminal Material Copper Alloy

Design Considerations

Careful selection of the correct device for the application’s

operating parameters and environment will go a long way

toward extending the operating life of the Thyristor. Good

design practice should limit the maximum continuous

current through the main terminals to 75% of the device

rating. Other ways to ensure long life for a power discrete

semiconductor are proper heat sinking and selection of

voltage ratings for worst case conditions. Overheating,

overvoltage (including dv/dt), and surge currents are

the main killers of semiconductors. Correct mounting,

soldering, and forming of the leads also help protect

against component damage.

Time

Temperature

TS(max)

TS(min)

time to peak temperature

Preheat

eat

Ramp-upRamp-up

Ramp-down

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

4 Amp Sensitive & Standard Triacs

Lxx04xx & Qxx04xx Series

Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead

Dimension Inches Millimeters

Min Max Min Max

A 0.380 0.420 9.65 10.67

B 0.105 0.115 2.67 2.92

C 0.230 0.250 5.84 6.35

D0.590 0.620 14.99 15.75

E0.142 0.147 3.61 3.73

F0.110 0.130 2.79 3.30

G 0.540 0.575 13.72 14.61

H 0.025 0.035 0.64 0.89

J0.195 0.205 4.95 5.21

K0.095 0.105 2.41 2.67

L 0.060 0.075 1.52 1.91

M 0.085 0.095 2.16 2.41

N 0.018 0.024 0.46 0.61

O 0.178 0.188 4.52 4.78

P 0.045 0.060 1. 1 4 1.52

R 0.038 0.048 0.97 1.22

MEASURING POINT

MT2

MT1

.276

7. 01

.526

13.36

.320

8.13

GATE

AREA (REF.) 0.17 IN

NOTCH IN

GATE LEAD

TO ID.

NON-ISOLATED

TAB

Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab

Dimension Inches Millimeters

Min Max Min Max

A 0.380 0.420 9.65 10.67

B 0.105 0.115 2.67 2.92

C 0.230 0.250 5.84 6.35

D0.590 0.620 14.99 15.75

E0.142 0.147 3.61 3.73

F0.110 0.130 2.79 3.30

G 0.540 0.575 13.72 14.61

H 0.025 0.035 0.64 0.89

J0.195 0.205 4.95 5.21

K0.095 0.105 2.41 2.67

L 0.060 0.075 1.52 1.91

M 0.085 0.095 2.16 2.41

N 0.018 0.024 0.46 0.61

O 0.178 0.188 4.52 4.78

P 0.045 0.060 1. 1 4 1.52

R 0.038 0.048 0.97 1.22

MEASURING POINT AREA (REF.) 0.17 IN

MT2

MT1 GATE

.320

8.13

.526

13.36

.276

7. 01

Note: Maximum torque to

be applied to mounting tab

is 8 in-lbs. (0.904 Nm).

Note: Maximum torque to

be applied to mounting tab

is 8 in-lbs. (0.904 Nm).

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

4 Amp Sensitive & Standard Triacs

Lxx04xx & Qxx04xx Series

Dimensions — TO-251AA (V-Package) — V-PAK Through Hole

Dimension Inches Millimeters

Min Typ Max Min Typ Max

A 0.040 0.044 0.050 1.02 1. 11 1.27

B 0.235 0.242 0.245 5.97 6.15 6.22

C 0.350 0.361 0.375 8.89 9.18 9.53

D 0.205 0.208 0.213 5.21 5.29 5.41

E0.255 0.262 0.265 6.48 6.66 6.73

F0.027 0.031 0.033 0.69 0.80 0.84

G 0.087 0.090 0.093 2.21 2.28 2.36

H 0.085 0.092 0.095 2.16 2.34 2.41

I 0.176 0.180 0.184 4.47 4.57 4.67

J 0.018 0.020 0.023 0.46 0.51 0.58

K 0.038 0.040 0.044 0.97 1. 01 1. 12

L 0.018 0.020 0.023 0.46 0.52 0.58

P 0.042 0.047 0.052 1.06 1.20 1.32

Q 0.034 0.039 0.044 0.86 1. 0 0 1. 11

R 0.034 0.039 0.044 0.86 1. 0 0 1. 11

S 0.074 0.079 0.084 1.86 2.00 2.11

AREA: 0.040 IN

MEASURING POINT

GATE G

5.28

.208

5.34

.210

MT2

MT1

MT2

Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount

Dimension Inches Millimeters

Min Typ Max Min Ty p Max

A 0.040 0.043 0.050 1.02 1.09 1.27

B 0.235 0.243 0.245 5.97 6.16 6.22

C 0.106 0.108 0.113 2.69 2.74 2.87

D 0.205 0.208 0.213 5.21 5.29 5.41

E0.255 0.262 0.265 6.48 6.65 6.73

F0.027 0.031 0.033 0.69 0.80 0.84

G 0.087 0.090 0.093 2.21 2.28 2.36

H 0.085 0.092 0.095 2.16 2.33 2.41

I 0.176 0.179 0.184 4.47 4.55 4.67

J 0.018 0.020 0.023 0.46 0.51 0.58

K 0.038 0.040 0.044 0.97 1.02 1. 12

L 0.018 0.020 0.023 0.46 0.51 0.58

M 0.000 0.000 0.004 0.00 0.00 0.10

N 0.021 0.026 0.027 0.53 0.67 0.69

O 0° 0° 5° 0° 0° 5°

P 0.042 0.047 0.052 1.06 1.20 1.32

Q 0.034 0.039 0.044 0.86 1. 0 0 1. 11

.118

.063

1.60

.071

1.80

.264

6.71

.264

6.71

.181

4.60

GATE

MT2

MT1

MT2

MEASURING POINT

5.28

.208

5.34

.210

: 0.040 IN

AREA

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

4 Amp Sensitive & Standard Triacs

Lxx04xx & Qxx04xx Series

Packing Options

Part Number Marking Weight Packing Mode Base Quantity

L/Q004L/Ry/TP L/Qxx04L/Ry 2.2 g Bulk 500

L/Qxx04LyTP L/Qxx04Ly 2.2 g Tube 500 (50 per tube)

L/Qxx04DyRP L/Qxx04Dy 0.3 g Embossed Carrier 2500

L/Qxx04DyTP L/Qxx04Dy 0.3 g Tube Pack 750 (75 per tube)

L/Qxx04VyTP L/Qxx04Vy 0.4 g Tube Pack 750 (75 per tube)

Note: xx = Voltage; y = Sensitivity

Product Selector

Part Number

Voltage Gate Sensitivity Quadrants

Type Package

400V 600V 800V 1000V I – II – III IV

Lxx04L3 X X 3 mA 3 mA Sensitive Triac TO-220L

Lxx04D3 X X 3 mA 3 mA Sensitive Triac TO-252 D-PAK

Lxx04R3 X X 3mA 3mA Sensitive Triac TO-220R

Lxx04V3 X X 3 mA 3 mA Sensitive Triac TO-251 V-PAK

Lxx04L5 X X 5 mA 5 mA Sensitive Triac TO-220L

Lxx04D5 X X 5 mA 5 mA Sensitive Triac TO-252 D-PAK

Lxx04R5 X X 5mA 5mA Sensitive Triac TO-220R

Lxx04V5 X X 5 mA 5 mA Sensitive Triac TO-251 V-PAK

Lxx04L6 X X 5 mA 10 mA Sensitive Triac TO-220L

Lxx04D6 X X 5 mA 10 mA Sensitive Triac TO-252 D-PAK

Lxx04R6 X X 5mA 10mA Sensitive Triac TO-220R

Lxx04V6 X X 5 mA 10 mA Sensitive Triac TO-251 V-PAK

Lxx04L8 X X 10 mA 20 mA Sensitive Triac TO-220L

Lxx04D8 X X 10 mA 20 mA Sensitive Triac TO-252 D-PAK

Lxx04R8 X X 10mA 20mA Sensitive Triac TO-220R

Lxx04V8 X X 10 mA 20 mA Sensitive Triac TO-251 V-PAK

Qxx04L3 X X 10 mA Standard Triac TO-220L

Qxx04D3 X X 10 mA Standard Triac TO-252 D-PAK

Qxx04V3 X X 10 mA Standard Triac TO-251 V-PAK

Qxx04R3 X X 10mA Standard Triac TO-220R

Qxx04L4 X X X X 25 mA Standard Triac TO-220L

Qxx04D4 X X X X 25 mA Standard Triac TO-252 D-PAK

Qxx04R4 X X X X 25mA Standard Triac TO-220R

Qxx04V4 X X X X 25 mA Standard Triac TO-251 V-PAK

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

4 Amp Sensitive & Standard Triacs

Lxx04xx & Qxx04xx Series

0.512 (13.0) Arbor

Hole Dia.

XXXXXX

Gate MT1

MT2

0.63

(16.0)

0.157

(4.0)

0.64

(16.3)

12.99

(330.0)

0.524

(13.3)

0.315

(8.0)

0.059 DIA

(1.5)

*Cover tape

Direction of Feed

Dimensions

are in inches

(and millimeters).

TO-252 Embossed Carrier Reel Pack (RP) Speciﬁcations

Meets all EIA-481-2 Standards

Part Marking SystemPart Numbering System

Q 60 04 L 4

DEVICE TYPE

L : Sensitive Triac

Q : Standard Triac

LEAD FORM DIMENSIONS

xx : Lead Form Option

CURRENT RATING

SENSITIVITY & TYPE

Sensitive Triac:

3 : 3 mA (QI, II, III, IV)

5 : 5 mA (QI, II, III, IV)

6 : 5 mA (QI, II, III)

10 mA (QIV)

8 : 10 mA (QI, II, III)

20 mA (QIV)

Standard Triac:

3 : 10 mA (QI, II, III)

4 : 25 mA (QI, II, III)

PACKAGE TYPE

L : TO-220 Isolated

R : TO-220 Non-Isolated

V : TO-251 (V-Pak)

D : TO-252 (D-Pak)

VOLTAGE RATING

40 : 400V

60 : 600V

80 : 800V

K0 : 1000V

04 : 4A

Q6004R4

Q6004L4

L6004V4

YMLDD ®

TO-251AA &

TO-252AA

(V and D Packages)