Agilent Technologies Oscilloscopes and Generators 500 MHz Oscilloscopes The right answer for your applications, from digital to RF. c 54610B Is the IndustryOs Lowest-Cost 500 MHz Scope c 54615B Offers 250 MHz Single-Shot Bandwidth c 54616B/C Offers 500 MHz Single-Shot Bandwidth and a Sample Rate of 2 GSa/s If you need the bandwidth to handle demanding applications, but want a troubleshooting and debugging scope thatOs ideal for your lab, AgilentOs 500 MHz scopes in the HP 54600 Series are sure to offer a solution. Many scopes offer good sample rate performance at fast sweep speeds but run into trouble as you slow the sweep down. But no matter how slowly you sweep the HP 54615B, 54616B or 54616C, they can still detect glitches as narrow as 1 ns when utilizing peak detect. Vertical Sensitivity: 2 mV/Div to 5 V/div (2.0% ). Input Res./Capacitance: 1 M1/21% / ~9 pf or 501/2 selectable. Time Base Range: 1 ns/div to 5 s/div. Modes: Main, Delayed and XY. Cursors/Measurements: X, Y, DX, DY/14 automatic measurements. Other: Optional GPIB/IEEE, parallel interface and measurement storage modules. 54616C has a color LCD. Stock No. Mfr.Os Type Channels Sample Rate/ Real Time Bandwidth Record Length Trigger Modes Glitch Capture Warranty EACH 835-0003 835-0004 835-0005 835-0006 54610B 54615B 54616B 54616C 2 2 2 2 20 MSa/s 1 GSa/s 2 GSa/s 2 GSa/s 500 MHz 500 MHz 500 MHz 500 MHz 4K 5K 5K 5K Edge/Video Edge/Video Edge/Video Edge/Video 50 ns 1 ns 1 ns 1 ns 3 years 3 years 3 years 3 years 4995.00 5695.00 6695.00 7695.00 100 MHz Oscilloscopes Easily see whatOs happening in your mixed analog and digital designs! c Unique 2 + 16-Channel MSO and 2- or 4Channel Models c 2 MB of MegaZoom Deep Memory Per Channel c Patented High-Definition Display System c Flexible Triggering Including I2C c 100-MHz, 200 MSa/s If you work with both analog and digital components, Agilent Technologies 54600-Series oscilloscopes can help you easily see more of what's going on in your designs. The unique 2 + 16-channel mixed signal oscilloscope (MSO) models and the traditional 2 and 4 channel models are optimized with just the capabilities you need for verifying and debugging designs that include A/Ds, D/As, DSPs and embedded 8-or 16-bit micro-controllers. These scopes give you the tools you need to solve your mixed analog and digital engineering challenges more easily. Vertical Sensitivity: 1 mV/div to 5 V/div (2.0% full scale). Input Res./Capacitance: 1 M1/21% / ~14 pf. Time Base Range: 5 ns/div to 50 s/div. Modes: Main, Delayed, Roll and XY. Cursors/ Measurements: X, Y, DX, DY /14 automatic measurements. Other: High resolution fast graphic display (255 1000 pixels, 32 levels). Standard floppy disk drive, RS-232 and parallel ports. Optional GPIB/IEEE interface. Trigger Modes: Edge/Pattern/Pulse/TV/Sequence/I 2C/Duration. Stock No. Mfr.Os Type Channels Sample Rate/ Real Time Bandwidth Record Length Glitch Capture Warranty EACH 835-0094 835-0095 835-0096 54622A 54622D 54624A 2 2+16 Logic 4 200 MSa/s 200 MSa/s 200 MSa/s 100 MHz 100 MHz 100 MHz 2M 2M 2M 5 ns 5 ns 5 ns 3 years 3 years 3 years 2995.00 4495.00 4495.00 HP 81101A 50 MHz Programmable Pulse Generator HP 81104A 80 MHz Pulse/Pattern Generator c c c c c c c c c c c c c c c c c c c 1 MHz to 50 MHz Frequency Range 1 Channel 5 ns-200 ms Variable Transition Time Up to 10 Vpp into 50 Ohms (20 Vpp into Open) Fully SCPI Programmable Graphical Display, Store/Recall Settings Preset TTL/ECL Levels 3 Years Standard Warranty 8.9 cm High, Full Rack Width The HP 81101A 50 MHz programmable pulse generator is a highly accurate one-channel pulse generator. It provides clean, accurate pulses with excellent repeatability, and timing changes are free of glitches and drop outs, even at the maximum frequency of 50 MHz. The pulse generator also features fast, variable transition time and flexible amplitude and duty cycle. This pulse generator generates all of the standard pulses needed to test current logic technologies (CMOS, TTL, ECL, etc). You can save test settings and program the HP 81101A for automated test routines. In addition, the HP 81101As programs can be used on other pulse/pattern generators in the HP 81100 family. 16 1 MHz to 80 MHz Frequency Range 1 or 2 Output Channels Analog Channel Addition with 2 Channels 3 ns-200 ms Variable Transition Times Up to 10 Vpp into 50 Ohms (20 Vpp into Open) Fully SCPI Programmable Graphical Display, Store/Recall Settings Preset TTL/ECL Levels 3 Years Standard Warranty 8.9 cm High, Full Rack Width The HP 81104A 80 MHz pulse/pattern generator generates all the standard pulses and digital patterns needed to test current logic technologies (CMOS, TTL, LVDS, ECL etc.) With the optional second channel, multi-level and multi-timing signals up to 60 MHz can be obtained using the internal channel addition feature. Pragmatically Channel 2 can be added to channel 1 internally. In this case the second output is disabled. The additional fixed delay on the second channel is typ. 2.5 ns. The HP 81104A is highly accurate providing clean, accurate pulses, free of glitches and drop outs even at the maximum frequency of 80 MHz. The HP 81101A features a clear graphical display, autoset, help, store/recall. Preset TTL/ECL levels, selectable units (such as current/voltage, width/duty-cycle), and load compensation. Values can be entered , exceeding the specified range, to fully exploit the hardware limits. The User Interface includes warning messages, error messages, help key and non-volatile memory for nine settings. The HP 81104A features a clear graphical display, autoset, help, store/recall. Preset TTL/ECL levels, selectable units (such as current/voltage, width/duty-cycle), and load compensation. Values can be entered , exceeding the specified range, to fully exploit the hardware limits. The User Interface includes warning messages, error messages, help key and non-volatile memory for nine settings. Level parameters can be entered as voltage or current, as high and low level, or as offset and amplitude. The output provides continuous pulses, double pulses or bursts (single or double pulses.) One input (BNC connector at rear panel) is used for clock input or alternatively for PLL. Level parameters can be entered as voltage or current, as high and low level, or as offset and amplitude. The output provides continuous pulses, double pulses or bursts (single or double pulses.) One input (BNC connector at rear panel) is used for clock input or alternatively for PLL. 835-0102. 81101A............................................................................................................................................. EACH 835Q0104. 81101A/UN2. Rear-panel connectors (instead of front) ................................................................EACH 835-0105. 81101A/81104A OPT.1CP. Rack mount and handle kit ..................................................................EACH 835-0106. 81101A/81104A OPT.1CN. Handle kit .............................................................................................EACH 835-0107. 81101A/81104A OPT.1CM. Rack mount kit ....................................................................................EACH 835-0108. 81101A/81104A OPT.1CR. Rack slide kit........................................................................................EACH 835-0109. 81101A/81104A OPT.UFJ. 1 MH SRAM memory card ...................................................................EACH 835-0103. 81104A............................................................................................................................................. EACH 835-0110. 81104A/UN2. Rear-panel connectors (instead of front)..................................................................EACH 835-0105. 81101A/81104A OPT.1CP. Rack mount and handle kit ..................................................................EACH 835-0106. 81101A/81104A OPT.1CN. Handle kit .............................................................................................EACH 835-0107. 81101A/81104A OPT.1CM. Rack mount kit ....................................................................................EACH 835-0108. 81101A/81104A OPT.1CR. Rack slide kit........................................................................................EACH 835-0109. 81101A/81104A OPT.UFJ. 1 MH SRAM memory card ...................................................................EACH 6220.00 6200.00 87.00 60.80 39.47 132.27 163.20 5397.71 5200.00 87.00 60.80 39.47 132.27 163.20 33120A Function Generators Clean, stable waveforms N and if you donOt like ours, make your own. c 10 Standard Waveforms, with Sine and Square to 15 MHz c Clean Signals: THD Less Than 0.04% and Flatness as Low as 0.1 dB c Build Arbitrary Waveforms with 40 MSa/s Speed and Storage for Four 16,000-Point Waveforms The 33120A function/arb generator offers you the rock-solid stability of digital synthesis at a price even your accounting department will feel good about. And not only do you get better performance, you get arbitrary waveforms available for the first time in this price range. Just imagine the ways you could use complex custom waveforms (with 12-bit resolution), from simulating heartbeats and vibrations to testing circuits in ways never before possible at this price. Sweep and modulation expand your test options without expanding your equipment list. Plus, you get full programmability using Standard Commands for Programmable Instruments (SCPI) with standard HP-IB and RS-232. The 33120A is another example of uncompromising T and M performance within your budget. Features. Standard Waveforms: Sine, square, triangle, ramp, noise, sin(x)/x, exponential rise and fall, cardiac, DC volts. Arbitrary: Waveform N 8 to 16,000 points; NV memory N four waveforms; Amplitude resolution N 12 bits; Sample rate N 40 MSa/s. Frequency: Sine N 100 Hz to 15 MHz; Square N 100 Hz to 15 MHz; Triangle N 100 Hz to 100 kHz; Ramp N 100 Hz to 100 kHz. Output into 50 W: 50 mVp-p to 10 Vp-p 1%. Modulation: AM, FM, FSK, burst. Total Harmonic Distortion: <0.04%. Flatness: As low as 0.1 dB. Warranty: 3 years. 835-0042. 33120A ........................................................................EACH 1795.00 972 b ALLIED 835-0044. 34811A/ABNE..............................................................EACH 1795.00 Letter OQO In Stock Number Indicates Direct Factory Shipment To You