Oscilloscopes and Generators
972
b
ALLIED Letter ÒQÓ In Stock Number Indicates Direct Factory Shipment To You
500 MHz Oscilloscopes
The right answer for your applications, from digital to RF.
c
54610B Is the IndustryÕs Lowest-Cost 500 MHz Scope
c
54615B Offers 250 MHz Single-Shot Bandwidth
c
54616B/C Offers 500 MHz Single-Shot Bandwidth and a Sample Rate of 2 GSa/s
If you need the bandwidth to handle demanding applications, but want a troubleshooting and debugging scope thatÕs ideal for your lab, AgilentÕs 500 MHz scopes in
the HP 54600 Series are sure to offer a solution.
Many scopes offer good sample rate performance at fast sweep speeds but run into trouble as you slow the sweep down. But no matter how slowly you sweep the
HP 54615B, 54616B or 54616C, they can still detect glitches as narrow as 1 ns when utilizing peak detect.
Vertical Sensitivity: 2 mV/Div to 5 V/div (±2.0% ). Input Res./Capacitance: 1 M½±1% / ~9 pf or 50½ selectable. Time Base Range: 1 ns/div to 5 s/div. Modes:
Main, Delayed and XY. Cursors/Measurements: X, Y, DX, DY/14 automatic measurements. Other: Optional GPIB/IEEE, parallel interface and measurement storage
modules. 54616C has a color LCD.
Stock Mfr.Õs Sample Rate/ Record Trigger Glitch
Channels Bandwidth Warranty EACH
No. Type Real Time Length Modes Capture
835-0003 54610B 2 20 MSa/s 500 MHz 4 K Edge/Video 50 ns 3 years 4995.00
835-0004 54615B 2 1 GSa/s 500 MHz 5 K Edge/Video 1 ns 3 years 5695.00
835-0005 54616B 2 2 GSa/s 500 MHz 5 K Edge/Video 1 ns 3 years 6695.00
835-0006 54616C 2 2 GSa/s 500 MHz 5 K Edge/Video 1 ns 3 years 7695.00
16
Agilent
Technologies
HP 81101A 50 MHz Programmable Pulse Generator
c
1 MHz to 50 MHz Frequency Range
c
1 Channel
c
5 ns-200 ms Variable Transition Time
c
Up to 10 Vpp into 50 Ohms (20 Vpp into Open)
c
Fully SCPI Programmable
c
Graphical Display, Store/Recall Settings
c
Preset TTL/ECL Levels
c
3 Years Standard Warranty
c
8.9 cm High, Full Rack Width
The HP 81101A 50 MHz programmable pulse generator is a highly accurate one-channel pulse generator. It provides
clean, accurate pulses with excellent repeatability, and timing changes are free of glitches and drop outs, even at the
maximum frequency of 50 MHz. The pulse generator also features fast, variable transition time and flexible amplitude and
duty cycle.
This pulse generator generates all of the standard pulses needed to test current logic technologies (CMOS, TTL, ECL, etc).
You can save test settings and program the HP 81101A for automated test routines. In addition, the HP 81101As
programs can be used on other pulse/pattern generators in the HP 81100 family.
The HP 81101A features a clear graphical display, autoset, help, store/recall. Preset TTL/ECL levels, selectable units (such
as current/voltage, width/duty-cycle), and load compensation. Values can be entered , exceeding the specified range, to
fully exploit the hardware limits. The User Interface includes warning messages, error messages, help key and non-volatile
memory for nine settings.
Level parameters can be entered as voltage or current, as high and low level, or as offset and amplitude. The output
provides continuous pulses, double pulses or bursts (single or double pulses.) One input (BNC connector at rear panel) is
used for clock input or alternatively for PLL.
835-0102. 81101A............................................................................................................................................. EACH 6220.00
835Q0104. 81101A/UN2. Rear-panel connectors (instead of front) ................................................................EACH 6200.00
835-0105. 81101A/81104A OPT.1CP. Rack mount and handle kit ..................................................................EACH 87.00
835-0106. 81101A/81104A OPT.1CN. Handle kit .............................................................................................EACH 60.80
835-0107. 81101A/81104A OPT.1CM. Rack mount kit ....................................................................................EACH 39.47
835-0108. 81101A/81104A OPT.1CR. Rack slide kit ........................................................................................ EACH 132.27
835-0109. 81101A/81104A OPT.UFJ. 1 MH SRAM memory card ...................................................................EACH 163.20
HP 81104A 80 MHz Pulse/Pattern Generator
c
1 MHz to 80 MHz Frequency Range
c
1 or 2 Output Channels
c
Analog Channel Addition with 2 Channels
c
3 ns-200 ms Variable Transition Times
c
Up to 10 Vpp into 50 Ohms (20 Vpp into Open)
c
Fully SCPI Programmable
c
Graphical Display, Store/Recall Settings
c
Preset TTL/ECL Levels
c
3 Years Standard Warranty
c
8.9 cm High, Full Rack Width
The HP 81104A 80 MHz pulse/pattern generator generates all the standard pulses and digital patterns needed to test current
logic technologies (CMOS, TTL, LVDS, ECL etc.) With the optional second channel, multi-level and multi-timing signals up
to 60 MHz can be obtained using the internal channel addition feature. Pragmatically Channel 2 can be added to channel 1
internally. In this case the second output is disabled. The additional fixed delay on the second channel is typ. 2.5 ns.
The HP 81104A is highly accurate providing clean, accurate pulses, free of glitches and drop outs even at the maximum
frequency of 80 MHz.
The HP 81104A features a clear graphical display, autoset, help, store/recall. Preset TTL/ECL levels, selectable units (such
as current/voltage, width/duty-cycle), and load compensation. Values can be entered , exceeding the specified range, to
fully exploit the hardware limits. The User Interface includes warning messages, error messages, help key and non-volatile
memory for nine settings.
Level parameters can be entered as voltage or current, as high and low level, or as offset and amplitude. The output
provides continuous pulses, double pulses or bursts (single or double pulses.) One input (BNC connector at rear panel) is
used for clock input or alternatively for PLL.
835-0103. 81104A............................................................................................................................................. EACH 5397.71
835-0110. 81104A/UN2. Rear-panel connectors (instead of front).................................................................. EACH 5200.00
835-0105. 81101A/81104A OPT.1CP. Rack mount and handle kit ..................................................................EACH 87.00
835-0106. 81101A/81104A OPT.1CN. Handle kit .............................................................................................EACH 60.80
835-0107. 81101A/81104A OPT.1CM. Rack mount kit ....................................................................................EACH 39.47
835-0108. 81101A/81104A OPT.1CR. Rack slide kit ........................................................................................ EACH 132.27
835-0109. 81101A/81104A OPT.UFJ. 1 MH SRAM memory card ...................................................................EACH 163.20
33120A Function Generators
Clean, stable waveforms Ñ and if you donÕt like ours, make your own.
If you work with both analog and digital components, Agilent Technologies 54600-Series oscilloscopes can help you easily see more of what's going on in your
designs. The unique 2 + 16-channel mixed signal oscilloscope (MSO) models and the traditional 2 and 4 channel models are optimized with just the capabilities you
need for verifying and debugging designs that include A/Ds, D/As, DSPs and embedded 8-or 16-bit micro-controllers. These scopes give you the tools you need to
solve your mixed analog and digital engineering challenges more easily.
Vertical Sensitivity: 1 mV/div to 5 V/div (±2.0% full scale). Input Res./Capacitance: 1 M½±1% / ~14 pf. Time Base Range: 5 ns/div to 50 s/div. Modes: Main,
Delayed, Roll and XY. Cursors/ Measurements: X, Y, DX, DY /14 automatic measurements. Other: High resolution fast graphic display (255 ´1000 pixels,
32 levels). Standard floppy disk drive, RS-232 and parallel ports. Optional GPIB/IEEE interface. Trigger Modes: Edge/Pattern/Pulse/TV/Sequence/I
2
C/Duration.
Stock Mfr.Õs Sample Rate/ Record Glitch
Channels Bandwidth Warranty EACH
No. Type Real Time Length Capture
835-0094 54622A 2 200 MSa/s 100 MHz 2 M 5 ns 3 years 2995.00
835-0095 54622D 2+16 Logic 200 MSa/s 100 MHz 2 M 5 ns 3 years 4495.00
835-0096 54624A 4 200 MSa/s 100 MHz 2 M 5 ns 3 years 4495.00
c
Unique 2 + 16-Channel MSO and 2- or 4-
Channel Models
c
2 MB of MegaZoom Deep Memory Per Channel
c
Patented High-Definition Display System
c
Flexible Triggering Including I
2
C
c
100-MHz, 200 MSa/s
100 MHz Oscilloscopes
Easily see whatÕs happening in your mixed analog and digital designs!
The 33120A function/arb generator offers you the rock-solid stability of digital synthesis at a price even your accounting department will feel good about.
And not only do you get better performance, you get arbitrary waveforms available for the first time in this price range. Just imagine the ways you could use complex
custom waveforms (with 12-bit resolution), from simulating heartbeats and vibrations to testing circuits in ways never before possible at this price.
Sweep and modulation expand your test options without expanding your equipment list. Plus, you get full programmability using Standard Commands for
Programmable Instruments (SCPI) with standard HP-IB and RS-232.
The 33120A is another example of uncompromising T and M performance within your budget.
Features. Standard Waveforms: Sine, square, triangle, ramp, noise, sin(x)/x, exponential rise and fall, cardiac, DC volts. Arbitrary: Waveform Ñ 8 to 16,000 points;
NV memory Ñ four waveforms; Amplitude resolution Ñ 12 bits; Sample rate Ñ 40 MSa/s. Frequency: Sine Ñ 100 µHz to 15 MHz; Square Ñ 100 µHz to 15 MHz;
Triangle Ñ 100 µHz to 100 kHz; Ramp Ñ 100 µHz to 100 kHz. Output into 50 W: 50 mVp-p to 10 Vp-p ±1%. Modulation: AM, FM, FSK, burst. Total Harmonic
Distortion: <0.04%. Flatness: As low as ±0.1 dB. Warranty: 3 years.
835-0042. 33120A ........................................................................EACH 1795.00 835-0044. 34811A/ABNE..............................................................EACH 1795.00
c
10 Standard Waveforms, with Sine and Square to 15 MHz
c
Clean Signals: THD Less Than 0.04% and Flatness as Low as ±0.1 dB
c
Build Arbitrary Waveforms with 40 MSa/s Speed and Storage for Four
16,000-Point Waveforms
