REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 1 of 15
HA178L00 Series
3-terminal Fixed Voltage Regulators
REJ03D0683-0300
Rev.3.00
Oct 24, 2007
Description
The HA178L00 series three-terminal fixed output voltage regulators. Can be used not only as stabilized power sources,
but also as Zener diodes because of their small outline package.
Features
Maximum output current: 150 mA (Tj = 25°C)
Large maximum power dissipation: 800 mW
Overcurrent protection
Temperature protection circuit
Ordering Information
Application Standard Output Voltage Tolerance ±8% A Version Output Voltage Tolerance ±5%
Industrial use HA178L00P HA178L00PA
HA178L00A Commercial use HA178L00
HA178L00UA
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 2 of 15
Output Voltage and Part No.
HA178L00PA • HA178L00P • HA178L00A • HA178L00
Output Voltage (V) Part No. Package Name Package Code
2.5 HA178L02
5 HA178L05
5.6 HA178L56
6 HA178L06
8 HA178L08
9 HA178L09
10 HA178L10
12 HA178L12
15 HA178L15
TO-92 ModV PRSS0003DC-A
HA178L00UA
Output Voltage (V) Part No. Marking Package Name Package Code
2.5 HA178L02UA 8A
5 HA178L05UA 8B
5.6 HA178L56UA 8C
6 HA178L06UA 8D
8 HA178L08UA 8E
9 HA178L09UA 8F
10 HA178L10UA 8G
12 HA178L12UA 8H
15 HA178L15UA 8J
UPAKV PLZZ0004CA-A
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 3 of 15
Pin Arrangement
2
1. OUT
2. GND
3. IN
1. OUT
2. GND
3. IN
4. GND
123
4
UPAKV TO-92 ModV
1
3
Block Diagram
Temperature
Protection
Reference
Voltage
Error
Amp.
(3) IN
(1) OUT
(2) GND
Over Current
Protection
Vref = 2.5 V
Standard Circuit
HA178Lxx
C
IN
0.33µF
C
OUT
0.1µF
Output
V
OUT
Input
V
IN
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 4 of 15
UPAKV Product (HA178L00UA) Mark Patterns
The mark patterns shown below are used on UPAKV products, as the package is small. Note that the product code and
mark pattern are different.
The pattern is laser-printed.
(1) (2)
(3) (4) (5)
Band mark
OUT
GND
IN
Notes: 1. Boxes (1) to (5) in the figures show the position of the letters or numerals, and are not actually marked on
the package.
2. (1) and (2) show the product-specific mark pattern.
Output Voltage (V) Part No. Mark Pattern (2 digit)
2.5 HA178L02UA 8A
5 HA178L05UA 8B
5.6 HA178L56UA 8C
6 HA178L06UA 8D
8 HA178L08UA 8E
9 HA178L09UA 8F
10 HA178L10UA 8G
12 HA178L12UA 8H
15 HA178L15UA 8J
3. (3) shows the production year code (the last digit of the year).
4. (4) shows the production month code.
Production Month 1 2 3 4 5 6 7 8 9 10 11 12
Marked Code A B C D E F G H J K L M
5. (5) shows the production week code.
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 5 of 15
Absolute Maximum Ratings
(Ta = 25°C)
Item Symbol Rating Unit Note
Input voltage VIN 35 V
800 TO-92 ModV *1 Power dissipation PT
800
mW
UPAKV *2
Operating ambient temperature Topr –40 to +85 °C
Storage temperature Tstg –55 to +150 °C
Note: 1. Ta 25°C, If Ta >25°C, derate by 6.4 mW/°C (See figure A)
2. 15mm × 25mm × 0.7 mm alumina ceramic board, Ta 25°C (See figure B)
Ambient Temperature Ta (°C)
Maximum Power Dissipation P
T
(mW)
1,200
1,000
800
600
400
200
025 50 12575 150
(1)
Ambient Temperature Ta (°C)
Figure A Figure B
Maximum Power Dissipation P
T
(mW)
100
(2)
(1) Non Board
(2) 15mm × 25mm × 0.7mm
Alumina Ceramic Board
1,000
800
600
400
200
0
200 25507585
100
416
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 6 of 15
Electrical Characteristics
HA178L02
(VIN = 10 V, IOUT = 40 mA, 0°C Tj 125°C, CIN = 0.33 µF, COUT = 0.1 µF)
HA178L02P
HA178L02
HA178L02PA
HA178L02A
HA178L02UA
Item Symbol
Min Typ Max Min Typ Max Unit Test Conditions
Output voltage VOUT 2.32 2.48 2.64 2.38 2.48 2.58 V Tj = 25°C
— 35 125 — 35 95 7 V VIN 20 V Line regulation VOLINE
— 30 100 — 30 75
mV Tj = 25°C
8 V VIN 20 V
— 14 — 14 — 1.0 mA IOUT 150 mA
— 9.5 50 9.5 50 1.0 mA IOUT 100 mA
Load regulation VOLOAD
— 4.5 25 4.5 25
mV Tj = 25°C
1.0 mA IOUT 40 mA
2.28 — 2.68 2.35 — 2.61 7 V VIN 20 V,
1.0 mA IOUT 40 mA
Output voltage VOUT
2.28 — 2.68 2.35 — 2.61
V
VIN = 9 V, 1.0 mA IOUT 70 mA
Quiescent current IQ 3.0 6.0 3.0 6.0 mA Tj= 25°C
— 1.5 — — 1.5 8.0 V VIN 20 V, Tj = 25°C Quiescent current
change
IQ
— 0.2 — — 0.1
mA
1.0 mA IOUT 40 mA, Tj = 25°C
Ripple rejection
ratio
RREJ — 60 — 60 — dB f = 120 Hz, 8.0 V VIN < 18 V,
Tj = 25°C
Temperature
coefficient of output
voltage
VOUT/Tj — +0.2 — — +0.2 mV/°C IOUT = 5 mA
HA178L05
(VIN = 10 V, IOUT = 40 mA, 0°C Tj 125°C, CIN = 0.33 µF, COUT = 0.1 µF)
HA178L05P
HA178L05
HA178L05PA
HA178L05A
HA178L05UA
Item Symbol
Min Typ Max Min Typ Max Unit Test Conditions
Output voltage VOUT 4.68 5.0 5.32 4.8 5.0 5.2 V Tj = 25°C
55 200 55 150 7 V VIN 20 V Line regulation VOLINE
45 150 45 100
mV Tj = 25°C
8 V VIN 20 V
— 16 — 16 — 1.0 mA IOUT 150 mA
— 11 60 — 11 60 1.0 mA IOUT 100 mA
Load regulation VOLOAD
— 5.0 30 5.0 30
mV Tj = 25°C
1.0 mA IOUT 40 mA
4.6 — 5.4 4.75 5.25 7 V VIN 20 V,
1.0 mA IOUT 40 mA
Output voltage VOUT
4.6 — 5.4 4.75 5.25
V
VIN = 10 V, 1.0 mA IOUT 70 mA
Quiescent current IQ 3.0 6.0 3.0 6.0 mA Tj= 25°C
— 1.5 — — 1.5 8.0 V VIN 20 V, Tj = 25°C Quiescent current
change
IQ
— 0.2 — — 0.1
mA
1.0 mA IOUT 40 mA, Tj = 25°C
Ripple rejection
ratio
RREJ — 58 — 58 — dB f = 120 Hz, 8.0 V VIN < 18 V,
Tj = 25°C
Temperature
coefficient of output
voltage
VOUT/Tj — +0.1 — — +0.1 mV/°C IOUT = 5 mA
Dropout voltage VDROP — 1.7 — 1.7 — V Tj = 25°C
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 7 of 15
HA178L56
(VIN = 11 V, IOUT = 40 mA, 0°C Tj 125°C, CIN = 0.33 µF, COUT = 0.1 µF)
HA178L56P
HA178L56
HA178L56PA
HA178L56A
HA178L56UA
Item Symbol
Min Typ Max Min Typ Max Unit Test Conditions
Output voltage VOUT 5.24 5.6 5.96 5.38 5.6 5.82 V Tj = 25°C
50 200 50 150 7.6 V VIN 21 V Line regulation VOLINE
45 150 45 100
mV Tj = 25°C
8.5 V VIN 21 V
— 17 — 17 — 1.0 mA IOUT 150 mA
— 11 60 — 11 60 1.0 mA IOUT 100 mA
Load regulation VOLOAD
— 5.0 30 5.0 30
mV Tj = 25°C
1.0 mA IOUT 40 mA
5.16 — 6.04 5.32 — 5.88 7.6 V VIN 21 V,
1.0 mA IOUT 40 mA
Output voltage VOUT
5.16 — 6.04 5.32 — 5.88
V
VIN = 11 V, 1.0 mA IOUT 70 mA
Quiescent current IQ 3.0 6.0 3.0 6.0 mA Tj= 25°C
— 1.5 — — 1.5 8.5 V VIN 2.0 V, Tj = 25°C Quiescent current
change
IQ
— 0.2 — — 0.1
mA
1.0 mA IOUT 40 mA, Tj = 25°C
Ripple rejection
ratio
RREJ — 58 — 58 — dB f = 120 Hz, 8.5 V VIN < 18.5 V,
Tj = 25°C
Temperature
coefficient of output
voltage
VOUT/Tj — +0.1 — — +0.1 mV/°C IOUT = 5 mA
Dropout voltage VDROP — 1.7 — 1.7 — V Tj = 25°C
HA178L06
(VIN = 11 V, IOUT = 40 mA, 0°C Tj 125°C, CIN = 0.33 µF, COUT = 0.1 µF)
HA178L06P
HA178L06
HA178L06PA
HA178L06A
HA178L06UA
Item Symbol
Min Typ Max Min Typ Max Unit Test Conditions
Output voltage VOUT 5.61 6.0 6.39 5.76 6.0 6.24 V Tj = 25°C
50 200 50 150 8.1 V VIN 21 V Line regulation VOLINE
45 150 45 110
mV Tj = 25°C
9.0 V VIN 21 V
— 17.5 — — 17.5 1.0 mA IOUT 150 mA
— 12 70 — 12 70 1.0 mA IOUT 100 mA
Load regulation VOLOAD
— 5.5 35 5.5 35
mV Tj = 25°C
1.0 mA IOUT 40 mA
5.52 — 6.48 5.7 6.3 8.1 V VIN 21 V,
1.0 mA IOUT 40 mA
Output voltage VOUT
5.52 — 6.48 5.7 6.3
V
VIN = 11 V, 1.0 mA IOUT 70 mA
Quiescent current IQ 3.0 6.0 3.0 6.0 mA Tj= 25°C
— 1.5 — — 1.5 9.0 V VIN 20 V, Tj = 25°C Quiescent current
change
IQ
— 0.2 — — 0.1
mA
1.0 mA IOUT 40 mA, Tj = 25°C
Ripple rejection
ratio
RREJ — 57 — 57 — dB f = 120 Hz, 9.0 V VIN < 19 V,
Tj = 25°C
Temperature
coefficient of output
voltage
VOUT/Tj — +0.1 — — +0.1 mV/°C IOUT = 5 mA
Dropout voltage VDROP — 1.7 — 1.7 — V Tj = 25°C
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 8 of 15
HA178L08
(VIN = 14 V, IOUT = 40 mA, 0°C Tj 125°C, CIN = 0.33 µF, COUT = 0.1 µF)
HA178L08P
HA178L08
HA178L08PA
HA178L08A
HA178L08UA
Item Symbol
Min Typ Max Min Typ Max Unit Test Conditions
Output voltage VOUT 7.48 8.0 8.52 7.7 8.0 8.3 V Tj = 25°C
20 200 20 175 10.5 V VIN 23 V Line regulation VOLINE
12 150 12 125
mV Tj = 25°C
11 V VIN 23 V
— 22 — 22 — 1.0 mA IOUT 150 mA
— 15 80 — 15 80 1.0 mA IOUT 100 mA
Load regulation VOLOAD
— 7.0 40 7.0 40
mV Tj = 25°C
1.0 mA IOUT 40 mA
7.36 — 8.64 7.6 8.4 10.5 V VIN 23 V,
1.0 mA IOUT 40 mA
Output voltage VOUT
7.36 — 8.64 7.6 8.4
V
VIN = 14 V, 1.0 mA IOUT 70 mA
Quiescent current IQ 3.0 6.5 3.0 6.5 mA Tj= 25°C
— 1.5 — — 1.5 11 V VIN 23 V, Tj = 25°C Quiescent current
change
IQ
— 0.2 — — 0.1
mA
1.0 mA IOUT 40 mA, Tj = 25°C
Ripple rejection
ratio
RREJ — 55 — 55 — dB f = 120 Hz, 12 V VIN < 23 V,
Tj = 25°C
Temperature
coefficient of output
voltage
VOUT/Tj — –0.1 — –0.1 mV/°C IOUT = 5 mA
Dropout voltage VDROP — 1.7 — 1.7 — V Tj = 25°C
HA178L09
(VIN = 15 V, IOUT = 40 mA, 0°C Tj 125°C, CIN = 0.33 µF, COUT = 0.1 µF)
HA178L09P
HA178L09
HA178L09PA
HA178L09A
HA178L09UA
Item Symbol
Min Typ Max Min Typ Max Unit Test Conditions
Output voltage VOUT 8.42 9.0 9.58 8.64 9.0 9.36 V Tj = 25°C
80 230 80 200 11.4 V VIN 24 V Line regulation VOLINE
20 160 20 160
mV Tj = 25°C
12 V VIN 24 V
— 24.5 — — 24.5 1.0 mA IOUT 150 mA
— 17 90 — 17 90 1.0 mA IOUT 100 mA
Load regulation VOLOAD
— 8.0 45 8.0 45
mV Tj = 25°C
1.0 mA IOUT 40 mA
8.28 — 9.72 8.55 — 9.45 11.4 V VIN 24 V,
1.0 mA IOUT 40 mA
Output voltage VOUT
8.28 — 9.72 8.55 — 9.45
V
VIN = 15 V, 1.0 mA IOUT 70 mA
Quiescent current IQ 3.1 6.5 3.1 6.5 mA Tj= 25°C
— 1.5 — — 1.5 12 V VIN 24 V, Tj = 25°C Quiescent current
change
IQ
— 0.2 — — 0.1
mA
1.0 mA IOUT 40 mA, Tj = 25°C
Ripple rejection
ratio
RREJ — 55 — 55 — dB f = 120 Hz, 12 V V < 24 V,
Tj = 25°C
Temperature
coefficient of output
voltage
VOUT/Tj — –0.15 — — –0.15 mV/°C IOUT = 5 mA
Dropout voltage VDROP — 1.7 — 1.7 — V Tj = 25°C
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 9 of 15
HA178L10
(VIN = 16 V, IOUT = 40 mA, 0°C Tj 125°C, CIN = 0.33 µF, COUT = 0.1 µF)
HA178L10P
HA178L10
HA178L10PA
HA178L10A
HA178L10UA
Item Symbol
Min Typ Max Min Typ Max Unit Test Conditions
Output voltage VOUT 9.35 10 10.65 9.6 10 10.4 V Tj = 25°C
80 230 80 230 12.5 V VIN 25 V Line regulation VOLINE
30 170 30 170
mV Tj = 25°C
13 V VIN 25 V
— 26 — 26 — 1.0 mA IOUT 150 mA
— 18 90 — 18 90 1.0 mA IOUT 100 mA
Load regulation VOLOAD
— 8.5 45 8.5 45
mV Tj = 25°C
1.0 mA IOUT 40 mA
9.2 — 10.8 9.5 — 10.5 12.5 V VIN 25 V,
1.0 mA IOUT 40 mA
Output voltage VOUT
9.2 — 10.8 9.5 — 10.5
V
VIN = 16 V, 1.0 mA IOUT 70 mA
Quiescent current IQ 3.1 6.5 3.1 6.5 mA Tj= 25°C
— 1.5 — — 1.5 13 V VIN 25 V, Tj = 25°C Quiescent current
change
IQ
— 0.2 — — 0.1
mA
1.0 mA IOUT 40 mA, Tj = 25°C
Ripple rejection
ratio
RREJ — 54 — 54 — dB f = 120 Hz, 13 V VIN < 24 V,
Tj = 25°C
Temperature
coefficient of output
voltage
VOUT/Tj — –0.2 — –0.2 mV/°C IOUT = 5 mA
Dropout voltage VDROP — 1.7 — 1.7 — V Tj = 25°C
HA178L12
(VIN = 19 V, IOUT = 40 mA, 0°C Tj 125°C, CIN = 0.33 µF, COUT = 0.1 µF)
HA178L12P
HA178L12
HA178L12PA
HA178L12A
HA178L12UA
Item Symbol
Min Typ Max Min Typ Max Unit Test Conditions
Output voltage VOUT 11.22 12 12.78 11.5 12 12.5 V Tj = 25°C
— 120 250 — 120 250 14.5 V VIN 27 V Line regulation VOLINE
— 100 200 — 100 200
mV Tj = 25°C
16 V VIN 27 V
— 28.5 — — 28.5 1.0 mA IOUT 150 mA
20 100 20 100 1.0 mA IOUT 100 mA
Load regulation VOLOAD
— 10 50 — 10 50
mV Tj = 25°C
1.0 mA IOUT 40 mA
11.04 — 12.96 11.4 12.6 14.5 V VIN 27 V,
1.0 mA IOUT 40 mA
Output voltage VOUT
11.04 — 12.96 11.4 12.6
V
VIN = 19 V, 1.0 mA IOUT 70 mA
Quiescent current IQ 3.1 6.5 3.1 6.5 mA Tj= 25°C
— 1.5 — — 1.5 16 V VIN 27 V, Tj = 25°C Quiescent current
change
IQ
— 0.2 — — 0.1
mA
1.0 mA IOUT 40 mA, Tj = 25°C
Ripple rejection
ratio
RREJ — 52 — 52 — dB f = 120 Hz, 15 V VIN < 25 V,
Tj = 25°C
Temperature
coefficient of output
voltage
VOUT/Tj — –0.3 — –0.3 mV/°C IOUT = 5 mA
Dropout voltage VDROP — 1.7 — 1.7 — V Tj = 25°C
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 10 of 15
HA178L15
(VIN = 23 V, IOUT = 40 mA, 0°C Tj 125°C, CIN = 0.33 µF, COUT = 0.1 µF)
HA178L15P
HA178L15
HA178L15PA
HA178L15A
HA178L15UA
Item Symbol
Min Typ Max Min Typ Max Unit Test Conditions
Output voltage VOUT 14.03 15 15.97 14.4 15 15.6 V Tj = 25°C
— 130 300 — 130 300 17.5 V VIN 30 V Line regulation VOLINE
— 110 250 — 110 250
mV Tj = 25°C
20 V VIN 30 V
— 36 — 36 — 1.0 mA IOUT 150 mA
25 150 25 150 1.0 mA IOUT 100 mA
Load regulation VOLOAD
— 12 75 — 12 75
mV Tj = 25°C
1.0 mA IOUT 40 mA
13.8 — 16.2 14.25 15.75 17.5 V VIN 30 V,
1.0 mA IOUT 40 mA
Output voltage VOUT
13.8 — 16.2 14.25 15.75
V
VIN = 23 V, 1.0 mA IOUT 70 mA
Quiescent current IQ 3.2 6.5 3.2 6.5 mA Tj= 25°C
— 1.5 — — 1.5 20 V VIN 30 V, Tj = 25°C Quiescent current
change
IQ
— 0.2 — — 0.1
mA
1.0 mA IOUT 40 mA, Tj = 25°C
Ripple rejection
ratio
RREJ — 49 — 49 — dB f = 120 Hz, 18.5 V VIN < 28.5 V,
Tj = 25°C
Temperature
coefficient of output
voltage
VOUT/Tj — –0.5 — –0.5 mV/°C IOUT = 5 mA
Dropout voltage VDROP — 1.7 — 1.7 — V Tj = 25°C
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 11 of 15
Characteristic Curves
4.9V
15.2
15
14.8
5.05
5.0
4.95
2.55
2.5
2.45
–40–25
0 25 50 75 125100 150
Junction Temperature Tj (°C)
Output Voltage V
OUT
(V)
HA178L15
V
IN
= 23 V
I
OUT
= 5 mA
HA178L05
V
IN
= 10 V
I
OUT
= 5 mA
HA178L02
V
IN
= 10 V
I
OUT
= 5 mA
2
0510
Input Voltage V
IN
(V)
HA178L02
V
OUT
= 2.48 V
R
L
= 62
Tj = 25°C
1
2.48V
Output Voltage vs. Junction Temperature Voltage Drop vs. Junction Temperature
Output Voltage vs. Input Voltage (1)
2.0
1.5
–40–25
0 25 50 75 100 125 150
Junction Temperature Tj (°C)
Voltage Drop V
Drop
(V)
HA178L05
V
OUT
= 5 V
I
OUT
= 40 mA
1.0
Input Voltage V
IN
(V)
Output Voltage V
OUT
(V)
Output Voltage V
OUT
(V)
6
0610
HA178L05
V
OUT
= 5 V
R
L
= 125
Tj = 25°C
2
24 8
4
0
6.8V
5V
Output Voltage vs. Input Voltage (2)
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 12 of 15
3
010 30
1
4
HA178L05
VOUT = 5 V
IOUT = 40 mA
Tj = 25°C
20
2
3
010 30
Input Voltage VIN (V)
Quiescent Current IQ (mA)
1
4
HA178L15
VOUT = 15 V
IOUT = 40 mA
Tj = 25°C
20
2
10
01020
5
515
15
HA178L15
VOUT = 15 V
RL = 375
Tj = 25°C
6.8V
15V
17.2V
3
010 30
Input Voltage VIN (V)
Quiescent Current IQ (mA)
1
4
HA178L02
VOUT = 2.48 V
IOUT = 40 mA
Tj = 25°C
20
2
Input Voltage VIN (V)
Output Voltage vs. Input Voltage (3) Quiescent Current vs. Input Voltage (1)
Output Voltage V
OUT
(V)
Input Voltage VIN (V)
Quiescent Current IQ (mA)
Quiescent Current vs. Input Voltage (2) Quiescent Current vs. Input Voltage (3)
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 13 of 15
5
050 250
Output Current I
OUT
(mA)
Output Voltage V
OUT
(V)
1
HA178L05
V
IN
= 10 V
V
OUT
= 5 V
Tj = 25°C
3
2
4
6
100 150 200 300
Tj = 125°C
Tj = 75°C
Tj = 25°C
Tj = 0°C
Quiescent Current vs. Junction Temperature (3)Quiescent Current vs. Junction Temperature (2)
Quiescent Current vs. Junction Temperature (1)
3.5
3.0
–40–25
0255075100125150
Junction Temperature Tj (°C)
2.5
HA178L02
V
IN
= 10 V
V
OUT
= 2.48 V
I
OUT
= 40 mA
3.5
3.0
–40–25
0 25 50 75 100 125 150
Junction Temperature Tj (°C)
2.5
HA178L15
V
IN
= 23 V
V
OUT
= 15 V
I
OUT
= 40 mA
0
3.5
3.0
–40–25
025 50 75 100 125 150
Junction Temperature Tj (°C)
Quiescent Current I
Q
(mA)
2.5
HA178L05
V
IN
= 10 V
V
OUT
= 5 V
I
OUT
= 40 mA
Quiescent Current I
Q
(mA) Quiescent Current I
Q
(mA)
Output Voltage vs. Output Current
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 14 of 15
50
30
10 100 1 k
Frequency f (Hz)
0
HA178L02
VIN = 10 V
VOUT = 2.48 V
Tj = 25°C
10 k 100 k
10
20
40
60
70
Ripple Rejection Ratio Rrej (dB)Ripple Rejection Ratio Rrej (dB)
50
30
10 100 1 k
Frequency f (Hz)
010 k 100 k
10
20
40
60
70
50
30
10 100 1 k
Frequency f (Hz)
010 k 100 k
10
20
40
60
70
HA178L15
VIN = 23 V
VOUT = 15 V
IOUT = 40 mA
Tj = 25°C
HA178L05
VIN = 10 V
VOUT = 5 V
IOUT = 40 mA
Tj = 25°C
01015
1
2
3
Hysteresis Voltage VH (V)
Output Voltage VO (V)
5
HA178L02
L05
L56
L06
L08
L09
L10 L12 L15
Input Voltage VIN (V)
Tj = 25°C
VH
Output Voltage VO (V)
Hysteresis Voltage vs. Output VoltageRipple Rejection Ratio vs. Frequency (3)
Ripple Rejection Ratio vs. Frequency (2)
Ripple Rejection Ratio Rrej (dB)
Ripple Rejection Ratio vs. Frequency (1)
HA178L00 Series
REJ03D0683-0300 Rev.3.00 Oct 24, 2007
Page 15 of 15
Package Dimensions
0.60 Max
0.55 Max
4.8 ± 0.4 3.8 ± 0.4
8.0 ± 0.5
0.7
2.3 Max
10.1 Min
0.5 Max
1.27
2.54
0.65 ± 0.1
0.75 Max
Previous Code
PRSS0003DC-A
TO-92 Mod / TO-92 ModV
MASS[Typ.]
0.35gSC-51
RENESAS CodeJEITA Package Code Unit: mm
Package Name
TO-92 Mod
4.5 ± 0.1
1.8 Max 1.5 ± 0.1
0.44 Max
0.44 Max
0.48 Max
0.53 Max
1.5 1.5
3.0
2.5 ± 0.1
4.25 Max
0.8 Min
φ1
0.4
(1.5)
(2.5)
(0.4)
(0.2)
Previous Code
PLZZ0004CA-A UPAK / UPAKV
MASS[Typ.]
0.050gSC-62
RENESAS CodeJEITA Package Code Unit: mm
Package Name
UPAK
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
http://www.renesas.com
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
RENESAS SALES OFFICES
© 2007. Renesas Technology Corp., Al l rights reserved. Printed in Japa n.
Colophon .7.0