⌂Products Download Events Support Videos
Search Keil.com...
Go
Go
Evaluation Boards
Overview
Third-Party Boards
Feedback
ARM Evaluation Boards
ARM7 Board Comparison
ARM9 Board Comparison
Cortex-M Board Comparison
MCB1000
MCB1200
MCB1700
MCB1800
Specifications
Knowledgebase Articles
User's Guide
Schematics
MCB4300
MCB9B500
MCBNUC1xx
MCBSTM32
MCBSTM32C
MCBSTM32EXL
MCBSTM32F200
MCBSTM32F400
MCBTMPM360
MCBTWRK60
Microcontroller Prototyping System
C251/C51 Evaluation Boards
8051 Board Comparison
MCB900 Evaluation Board
MCB950 Evaluation Board
Products
Development Tools
ARM
C166
C51
C251
µVision IDE and Debugger
Hardware & Collateral
ULINK Debug Adaptors
Evaluation Boards
Product Brochures
Device Database
Distributors
Downloads
MDK-ARM
C51
C166
C251
File downloads
Support
Knowledgebase
Discussion Forum
Product Manuals
Application Notes
Contact
Distributors
Request a Quote
Sales Contacts
Contact Us | Site Feedback | Terms of Use | Privacy Policy
Copyright © 2013 ARM Ltd and ARM Germany GmbH. All rights reserved.
Request a Quote
Request a Quote
Home / MCB1800 Evaluation Board
MCB1800
Evaluation Board and Starter Kit
The Keil MCB1800 Evaluation Boards enable you to create and test working programs
based on the NXP LPC1850 family of ARM Cortex™-M3 processor-based devices.
The MCB1800 Evaluation Board is available in two different configurations:
The MCB1850 Evaluation Board is populated with an NXP LPC1850 device
The MCB1857 Evaluation Board is populated with a NXP LPC1857 device
Features
180MHz ARM Cortex-M3 processor-based MCU in LBGA256
On-Chip SRAM: 136KB (LPC1857), 200KB (LPC1850)
On-Chip Flash: 1MB dual bank (LPC1857), no on-chip Flash (LPC1850)
On-Board Memory: 16MB NOR Flash, 4MB Quad-SPI Flash, 16 MB SDRAM, & 16KB EEPROM (I2C)
Color QVGA TFT LCD with touchscreen
10/100 Ethernet Port
High-speed USB 2.0 Host/Device/OTG interface (USB host + Micro USB Device/OTG connectors)
Full-speed USB 2.0 Host/Device interface (USB host + micro USB Device connectors)
CAN interfaces
Serial/UART Port
MicroSD Card Interface
4 user push-buttons + reset
Digital Temperature Sensor (I2C)
Analog Voltage Control for ACD Input
Audio CODEC with Line-In/Out and Microphone/headphone connector + Speaker
Debug Interface Connectors
20-pin JTAG (0.1 inch)
10-pin Cortex debug (0.05 inch)
20-pin Cortex debug + ETM Trace (0.05 inch)
Development Software
The MCB1800 Evaluation Board and Starter Kit includes the MDK-ARM Lite Edition Tools. These tools help you
get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on
the MCB1800 evaluation board, and a Quickstart guide are included.
Ordering Information
The MCB1800 is available as a stand alone evaluation board or as a starter kit which includes the
ULINK-ME debug adapter.
MCB1850: MCB1850 evaluation board
MCB1850UME: MCB1850 starter kit (includes ULINK-ME)
MCB1857: MCB1857 evaluation board - available Q3,12
MCB1857UME: MCB1857 starter kit (includes ULINK-ME) - available Q3,12
