TPSMC6.8 thru TPSMC47A
Document Number 88407
15-Aug-05
Vishay Semiconductors
www.vishay.com
1
*Patent #'s
4,980,315
5,278,094
Patented*
5,166,769
DO-214AB (SMC)
Surface Mount Automotive Transient Voltage Suppressors
High Temperature Stability & High
Reliability Conditions
Major Ratings and Characteristics
V(BR) 6.8 V to 47 V
PPPM 1500 W
IFSM 200 A
Tj max. 185 °C
Features
• Patented PAR® construction
• Available in Unidirectional polarity only
• 1500 W peak pulse power capability with a
10/1000 µs waveform
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Typical ID less than 1.0 µA above 15 V rating
• Meets MSL level 1, per J-STD-020C
• Solder Dip 260 °C, 40 seconds
Typical Applications
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive, and
Telecommunication
Mechanical Data
Case: DO-214AB (SMC)
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: Color band denotes cathode end
Maximum Ratings
(TA = 25 °C, unless otherwise noted)
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum
Parameter Symbol Value Unit
Peak pulse power dissipation with a 10/1000 µs waveform(1)(2) (Fig. 3) PPPM Minimum 1500 W
Peak power pulse current with a 10/1000 µs waveform(1) (Fig. 1) IPPM See Next Table A
Peak forward surge current 8.3 ms single half sine-wave(2) IFSM 200 A
Maximum instantaneous forward voltage at 100 A(2) VF3.5 V
Operating junction and storage temperature range TJ, TSTG - 65 to + 185 °C
www.vishay.com
2
Document Number 88407
15-Aug-05
TPSMC6.8 thru TPSMC47A
Vishay Semiconductors
Electrical Characteristics
(TA = 25 °C unless otherwise noted)
Notes:
(1) V(BR) measured after IT applied for 300 µs, IT = square wave pulse or equivalent
(2) Surge current waveform per Fig. 3 and derated per Fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
Device Type
Device
Marking
Code
Breakdown Voltage
V(BR)(1) at IT
(V)
Te st
Current
IT
(mA)
Stand-off
Voltage
VWM
(V)
Maximum
Reverse
Leakage
at VWM
IR
(µA)
TJ = 150 °C
Maximum
Reverse
Leakage
at VWM
ID (µA)
Maximum.
Peak
Pulse
Surge
Current
IPPM(2) (A)
Maximum
Clamping
Voltage
at
IPPM
VC (V)
Min Max
TPSMC6.8 DDP 6.12 7.48 10.0 5.50 1000 10000 139.0 10.8
TPSMC6.8A DEP 6.45 7.14 10.0 5.80 1000 10000 143.0 10.5
TPSMC7.5 DFP 6.75 8.25 10.0 6.05 500 5000 128.0 11.7
TPSMC7.5A DGP 7.13 7.88 10.0 6.40 500 5000 133.0 11.3
TPSMC8.2 DHP 7.38 9.02 10.0 6.63 200 2000 120.0 12.5
TPSMC8.2A DKP 7.79 8.61 10.0 7.02 200 2000 124.0 12.1
TPSMC9.1 DLP 8.19 10.0 1.0 7.37 50 500 109.0 13.8
TPSMC9.1A DMP 8.65 9.55 1.0 7.78 50 500 112.0 13.4
TPSMC10 DNP 9.00 11.0 1.0 8.10 20 200 100.0 15.0
TPSMC10A DPP 9.50 10.5 1.0 8.55 20 200 103.0 14.5
TPSMC11 DQP 9.90 12.1 1.0 8.92 5.0 50 92.6 16.2
TPSMC11A DRP 10.5 11.6 1.0 9.40 5.0 50 96.2 15.6
TPSMC12 DSP 10.8 13.2 1.0 9.72 2.0 10 86.7 17.3
TPSMC12A DTP 11.4 12.6 1.0 10.2 2.0 10 89.8 16.7
TPSMC13 DUP 11.7 14.3 1.0 10.5 2.0 10 78.9 19.0
TPSMC13A DVP 12.4 13.7 1.0 11.1 2.0 10 82.4 18.2
TPSMC15 DWP 13.5 16.5 1.0 12.1 1.0 10 68.2 22.0
TPSMC15A DXP 14.3 15.8 1.0 12.8 1.0 10 70.8 21.2
TPSMC16 DYP 14.4 17.6 1.0 12.9 1.0 10 63.8 23.5
TPSMC16A DZP 15.2 16.8 1.0 13.6 1.0 10 66.7 22.5
TPSMC18 EDP 16.2 19.8 1.0 14.5 1.0 10 56.6 26.5
TPSMC18A EEP 17.1 18.9 1.0 15.3 1.0 10 59.5 25.2
TPSMC20 EFP 18.0 22.0 1.0 16.2 1.0 10 51.5 29.1
TPSMC20A EGP 19.0 21.0 1.0 17.1 1.0 10 54.2 27.7
TPSMC22 EHP 19.8 24.2 1.0 17.8 1.0 10 47.0 31.9
TPSMC22A EKP 20.9 23.1 1.0 18.8 1.0 10 49.0 30.6
TPSMC24 ELP 21.6 26.4 1.0 19.4 1.0 10 43.2 34.7
TPSMC24A EMP 22.8 25.2 1.0 20.5 1.0 10 45.2 33.2
TPSMC27 ENP 24.3 29.7 1.0 21.8 1.0 10 38.4 39.1
TPSMC27A EPP 25.7 28.4 1.0 23.1 1.0 10 40.0 37.5
TPSMC30 EQP 27.0 33.0 1.0 24.3 1.0 10 34.5 43.5
TPSMC30A ERP 28.5 31.5 1.0 25.6 1.0 10 36.2 41.4
TPSMC33 ESP 29.7 36.3 1.0 26.8 1.0 10 31.4 47.7
TPSMC33A ETP 31.4 34.7 1.0 28.2 1.0 10 32.8 45.7
TPSMC36 EUP 32.4 39.6 1.0 29.1 1.0 10 28.8 52.0
TPSMC36A EVP 34.2 37.8 1.0 30.8 1.0 10 30.1 49.9
TPSMC39 EWP 35.1 42.9 1.0 31.6 1.0 10 26.6 56.4
TPMSC39A EXP 37.1 41.0 1.0 33.3 1.0 10 27.8 53.9
TPSMC43 EYP 38.7 47.3 1.0 34.8 1.0 10 24.2 61.9
TPSMC43A EZP 40.9 45.2 1.0 36.8 1.0 10 25.3 59.3
TPSMC47 FDP 42.3 51.7 1.0 38.1 1.0 20 22.1 67.8
TPSMC47A FEP 44.7 49.4 1.0 40.2 1.0 20 23.1 64.8
TPSMC6.8 thru TPSMC47A
Document Number 88407
15-Aug-05
Vishay Semiconductors
www.vishay.com
3
Ratings and Characteristics Curves
(TA = 25 °C unless otherwise specified)
Figure 1. Peak Pulse Power Rating Curve
Figure 2. Pulse Power or Current versus Initial Junction
Temperature
Figure 3. Pulse Waveform
0.1
1
10
100
Non-repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
td - Pulse Width (sec.)
PPPM - Peak Pulse Power (kW)
0
25
50
75
100
07525 50 100 125 150 175 200
Peak Pulse Power (P
PP
)orCurrent (I
PP
)
Derating in Percentage, %
T
J
- Initial Temperature (°C)
0
50
100
150
Half Value — IPP
IPPM 2
01.0 2.0 3.0 4.0
TJ = 25 °C
Pulse Width (td)
is defined as the point
where the peak current
decays to 50 % of IPPM
tr = 10 µsec.
10/1000 µsec. Waveform
as defined by R.E.A.
Peak Value
IPPM
td
I
PPM
- Peak Pulse Current, % I
RSM
t - Time (ms)
Figure 4. Typical Junction Capacitance
Figure 5. Maximum Non-Repetitive/Peak Forward Surge Current
100
1000
10000
20000
10 1.0 100 200
T
J
= 25 °C
f = 1.0 MHz
Vsig = 50mVp-p
Measured at
Zero Bias
Measured at
Stand-Off
Voltage, V
WM
V
(BR)
- Breakdown Voltage (V)
C
J
- Junction Capacitance (pF)
10
50
100
200
TJ = TJ max.
8.3 ms Single Half Sine-Wave
IFSM - Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
1 5 10 50 100
www.vishay.com
4
Document Number 88407
15-Aug-05
TPSMC6.8 thru TPSMC47A
Vishay Semiconductors
Package outline dimensions in inches (millimeters)
0.260 (6.60)
0.280 (7.11)
0.006 (0.152)
0.012 (0.305)
0.030 (0.76)
0.060 (1.52) 0.008 (0.2)
0.305 (7.75)
0.320 (8.13)
0.220 (5.59)
0.246 (6.22)
0.079 (2.06)
0.103 (2.62)
0.114 (2.90)
0.126 (3.20)
Cathode Band
DO-214AB (SMC)
0.185 MAX.
(4.69 MAX.)
0.320 REF
0.126 MIN.
(3.20 MIN.)
0.060 MIN.
(1.52 MIN.)
Mounting Pad Layout
0 (0)
