Not for new design
© 2006 IXYS All rights reserved 1 - 2
IXYS reserves the right to change limits, test conditions and dimensions.
VDI 130-06P1 VII 130-06P1
VID 130-06P1 VIO 130-06P1
0650
B3
IC25 = 121 A
VCES = 600 V
VCE(sat) typ. = 2.3 V
IGBTs
Symbol Conditions Maximum Ratings
VCES TVJ = 25°C to 150°C 600 V
VGES ± 20 V
IC25 TC = 25°C 121 A
IC80 TC = 80°C 83 A
ICM VGE = ±15 V; RG = 2.2 Ω; TVJ = 125°C 200 A
VCEK RBSOA, Clamped inductive load; L = 100 µH 360 V
tSC VCE = VCES; VGE = ±15 V; RG = 2.2 Ω; TVJ = 125°C 10 µs
(SCSOA) non-repetitive
Ptot TC = 25°C 379 W
Symbol Conditions Characteristic Values
(TVJ = 25°C, unless otherwise specified)
min. typ. max.
VCE(sat) IC = 130 A; VGE = 15 V; TVJ = 25°C 2.3 2.9 V
TVJ = 125°C 2.6 V
VGE(th) IC = 1.5 mA; VGE = VCE 4.5 6.5 V
ICES VCE = VCES;V
GE = 0 V; TVJ = 25°C 1.2 mA
TVJ = 125°C 7.5 mA
IGES VCE = 0 V; VGE = ± 20 V 400 nA
td(on) 25 ns
tr11 ns
td(off) 150 ns
tf30 ns
Eon 0.8 mJ
Eoff 2.3 mJ
Cies VCE = 25 V; VGE = 0 V; f = 1 MHz 4.2 nF
RthJC (per IGBT) 0.33 K/W
RthJH with heatsink compound (0.42 K/m.K; 50 µm) 0.66 K/W
Inductive load, TVJ = 125°C
VCE = 300 V; IC = 80 A
VGE = 15/0 V; RG = 2.2 Ω
IGBT Modules in ECO-PAC 2
Short Circuit SOA Capability
Square RBSOA
Preliminary data sheet
VDI
X15
X16
NTC
AC1PS18IK10
L9
T16
VID
IK10SV18AC1
L9
F1
X15
X16
NTC
Pin arangement see outlines
Features
• NPT IGBT's
- positive temperature coefficient of
saturation voltage
- fast switching
• FRED diodes
- fast reverse recovery
- low forward voltage
• Industry Standard Package
- solderable pins for PCB mounting
- isolated DCB ceramic base plate
Advantages
• space and weight savings
• reduced protection circuits
• leads with expansion bend for stress relief
Typical Applications
• AC and DC motor control
• AC servo and robot drives
• power supplies
• welding inverters
VII
OP9
GH10
VX18
L9
E2
K10
X16
X13
X15
NTC
VIO
IJK 10LMN 9
A1
S18
Recommended replacement:
Please contact your local
sales office
Not for new design
© 2006 IXYS All rights reserved 2 - 2
IXYS reserves the right to change limits, test conditions and dimensions.
VDI 130-06P1 VII 130-06P1
VID 130-06P1 VIO 130-06P1
0650
B3
Reverse diodes (FRED)
Symbol Conditions Maximum Ratings
IF25 TC = 25°C 134.0 A
IF80 TC = 80°C 82.3 A
Symbol Conditions Characteristic Values
min. typ. max.
VFIF = 80 A; TVJ = 25°C 1.85 2.06 V
TVJ = 125°C 1.40 V
IRM IF = 60 A; diF/dt = 500 A/µs; TVJ = 125°C 28 A
trr VR = 300 V; VGE = 0 V 100 ns
RthJC 0.66 K/W
RthJH with heatsink compound (0.42 K/m.K; 50 µm) 1.32 K/W
Module
Symbol Conditions Maximum Ratings
TVJ -40...+150 °C
Tstg -40...+150 °C
VISOL IISOL ≤ 1 mA; 50/60 Hz 3000 V~
Mdmounting torque (M4) 1.5 - 2.0 Nm
14 - 18 lb.in.
aMax. allowable acceleration 50 m/s2
Symbol Conditions Characteristic Values
min. typ. max.
dSCreepage distance on surface (Pin to heatsink) 11.2 mm
dAStrike distance in air (Pin to heatsink) 11.2 mm
Weight 24 g
VII
Temperature Sensor NTC
Symbol Conditions Characteristic Values
min. typ. max.
R25 T = 25°C 4.75 5.0 5.25 kΩ
B25/50 3375 K
Data according to IEC 60747 and refer to a single transistor or diode unless otherwise stated.
VIO
VID
VDI
