© Semiconductor Components Industries, LLC, 2011
September, 2011 − Rev. 6
1Publication Order Number:
LM833/D
LM833, NCV833
Low Noise, Audio Dual
Operational Amplifier
The LM833 is a standard low−cost monolithic dual general−purpose
operational amplifier employing Bipolar technology with innovative
high−performance concepts for audio systems applications. With high
frequency PNP transistors, the LM833 offers low voltage noise
(4.5 nV/ Hz ), 15 MHz gain bandwidth product, 7.0 V/ms slew rate,
0.3 mV input offset voltage with 2.0 mV/°C temperature coefficient of
input offset voltage. The LM833 output stage exhibits no dead−band
crossover distortion, large output voltage swing, excellent phase and
gain margins, low open loop high frequency output impedance and
symmetrical source/sink AC frequency response.
For an improved performance dual/quad version, see the MC33079
family.
Features
•Low Voltage Noise: 4.5 nV/ Hz
Ǹ
•High Gain Bandwidth Product: 15 MHz
•High Slew Rate: 7.0 V/ms
•Low Input Offset Voltage: 0.3 mV
•Low T.C. of Input Offset Voltage: 2.0 mV/°C
•Low Distortion: 0.002%
•Excellent Frequency Stability
•Dual Supply Operation
•NCV Prefix for Automotive and Other Applications Requiring Site
and Change Controls
•These Devices are Pb−Free and are RoHS Compliant
MAXIMUM RATINGS
Rating Symbol Value Unit
Supply Voltage (VCC to VEE) VS+36 V
Input Differential Voltage Range (Note 1) VIDR 30 V
Input Voltage Range (Note 1) VIR ±15 V
Output Short Circuit Duration (Note 2) tSC Indefinite
Operating Ambient Temperature Range TA−40 to +85 °C
Operating Junction Temperature TJ+150 °C
Storage Temperature Tstg −60 to +150 °C
ESD Protection at any Pin
− Human Body Model
− Machine Model
Vesd 600
200
V
Maximum Power Dissipation (Notes 2 and 3) PD500 mW
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Either or both input voltages must not exceed the magnitude of VCC or VEE.
2. Power dissipation must be considered to ensure maximum junction
temperature (TJ) is not exceeded (see power dissipation performance
characteristic).
3. Maximum value at TA ≤ 85°C.
PDIP−8
N SUFFIX
CASE 626
1
SOIC−8
D SUFFIX
CASE 751
1
MARKING
DIAGRAMS
LM833 = Device Code
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G= Pb−Free Package
PIN CONNECTIONS
2
(Top View)
1
3
4
8
7
6
5
Output 1
Inputs 1
Output 2
Inputs 2
VEE
VCC
1
2
1
8
LM833N
AWL
YYWWG
http://onsemi.com
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
ORDERING INFORMATION
LM833
ALYW
G
1
LM833N = Device Code
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = Pb−Free Package
LM833, NCV833
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = −15 V, TA = 25°C, unless otherwise noted.)
Characteristic Symbol Min Typ Max Unit
Input Offset Voltage (RS = 10 W, VO = 0 V) VIO −0.3 5.0 mV
Average Temperature Coefficient of Input Offset Voltage
RS = 10 W, VO = 0 V, TA = Tlow to Thigh
DVIO/DT−2.0 −mV/°C
Input Offset Current (VCM = 0 V, VO = 0 V) IIO −10 200 nA
Input Bias Current (VCM = 0 V, VO = 0 V) IIB −300 1000 nA
Common Mode Input Voltage Range VICR −
−12
+14
−14
+12
−
V
Large Signal Voltage Gain (RL = 2.0 kW, VO = ±10 V) AVOL 90 110 −dB
Output Voltage Swing:
RL = 2.0 kW, VID = 1.0 V
RL = 2.0 kW, VID = 1.0 V
RL = 10 kW, VID = 1.0 V
RL = 10 kW, VID = 1.0 V
VO+
VO−
VO+
VO−
10
−
12
−
13.7
−14.1
13.9
−14.7
−
−10
−
−12
V
Common Mode Rejection (Vin = ±12 V) CMR 80 100 −dB
Power Supply Rejection (VS = 15 V to 5.0 V, −15 V to −5.0 V) PSR 80 115 −dB
Power Supply Current (VO = 0 V, Both Amplifiers) ID−4.0 8.0 mA
AC ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = −15 V, TA = 25°C, unless otherwise noted.)
Characteristic Symbol Min Typ Max Unit
Slew Rate (Vin = −10 V to +10 V, RL = 2.0 kW, AV = +1.0) SR5.0 7.0 −V/ms
Gain Bandwidth Product (f = 100 kHz) GBW 10 15 −MHz
Unity Gain Frequency (Open Loop) fU−9.0 −MHz
Unity Gain Phase Margin (Open Loop) qm−60 −°
Equivalent Input Noise Voltage (RS = 100 W, f = 1.0 kHz) en−4.5 −nVńHz
Ǹ
Equivalent Input Noise Current (f = 1.0 kHz) in−0.5 −pAńHz
Ǹ
Power Bandwidth (VO = 27 Vpp, RL = 2.0 kW, THD ≤ 1.0%) BWP −120 −kHz
Distortion (RL = 2.0 kW, f = 20 Hz to 20 kHz, VO = 3.0 Vrms, AV = +1.0) THD −0.002 −%
Channel Separation (f = 20 Hz to 20 kHz) CS− −120 −dB
Figure 1. Maximum Power Dissipation
versus Temperature
Figure 2. Input Bias Current versus Temperature
TA, AMBIENT TEMPERATURE (°C)
P , MAXIMUM POWER DISSIPATION (mW)
D
I , INPUT BIAS CURRENT (nA)
IB
800
600
400
200
0
-50 0 50 100 150
1000
800
600
400
200
0
-55 -25 0 25 50 75 100 125
TA, AMBIENT TEMPERATURE (°C)
VCC = +15 V
VEE = -15 V
VCM = 0 V
LM833, NCV833
http://onsemi.com
3
TA, AMBIENT TEMPERATURE (°C)
GBW, GAIN BANDWIDTH PRODUCT (MHz)
20
15
10
5.0
0
-25 0 25 50 75 100 12
5
-55
VCC = +15 V
VEE = -15 V
f = 100 kHz
Figure 3. Input Bias Current versus
Supply Voltage
Figure 4. Supply Current versus
Supply Voltage
Figure 5. DC Voltage Gain
versus Temperature
Figure 6. DC Voltage Gain versus
Supply Voltage
Figure 7. Open Loop Voltage Gain and
Phase versus Frequency
Figure 8. Gain Bandwidth Product
versus Temperature
TA, AMBIENT TEMPERATURE (°C)
VCC, |VEE|, SUPPLY VOLTAGE (V)
f, FREQUENCY (Hz)
VCC, |VEE|, SUPPLY VOLTAGE (V)
VCC, |VEE|, SUPPLY VOLTAGE (V)
I , SUPPLY CURRENT (mA)
S
A , OPEN LOOP VOLTAGE GAIN (dB)
VOL A , DC VOLTAGE GAIN (dB)
VOL
800
600
400
200
05.0 10 15 20
10
8.0
6.0
4.0
2.0
0
110
105
100
95
90
-55 -25 0 25 50 75 100 125
110
100
90
80
0 5.0 10 15 20
120
100
80
60
40
20
01.0 10 100 1.0 k 10 k 100 k 1.0 M 10 M
0
45
90
135
180
5.0 10 15 20
, EXCESS PHASE (DEGREES)∅
RL = ∞
TA = 25°C
VCC
VO
VEE
IS
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
TA = 25°C
Phase
Gain
, INPUT BIAS CURRENT (nA)IIB
A , DC VOLTAGE GAIN (dB)
VOL
+
RL = 2.0 kW
TA = 25°C
TA = 25°C
LM833, NCV833
http://onsemi.com
4
VO, OUTPUT VOLTAGE (V )
pp
VO, OUTPUT VOLTAGE (V )
pp
Figure 9. Gain Bandwidth Product versus
Supply Voltage
Figure 10. Slew Rate versus Temperature
Figure 11. Slew Rate versus Supply Voltage Figure 12. Output Voltage versus Frequency
Figure 13. Maximum Output Voltage
versus Supply Voltage
Figure 14. Output Saturation Voltage
versus Temperature
TA, AMBIENT TEMPERATURE (°C)
VCC, |VEE|, SUPPLY VOLTAGE (V)
f, FREQUENCY (Hz)
GBW, GAIN BANDWIDTH PRODUCT (MHz)
VCC, |VEE|, SUPPLY VOLTAGE (V)
VCC, |VEE|, SUPPLY VOLTAGE (V)
TA, AMBIENT TEMPERATURE (°C)
SR, SLEW RATE (V/ s)μ
SR, SLEW RATE (V/ s)μ
V , OUTPUT SATURATION VOLTAGE |V|
sat
30
20
10
0
5.0 10 15 20
10
8.0
6.0
4.0
2.0
-55 -25 0 25 50 75 100 125
10
8.0
6.0
4.0
2.0
0
35
30
25
20
15
10
5.0
010 100 1.0 k 10 k 1.0 M 10 M 100 k
20
15
10
5.0
0
-5.0
-10
-15
-20
15
14
13
5.0 10 15 20
5.0 10 15 20 -55 -25 0 25 50 75 100 125
f = 100 kHz
TA = 25°C
RL = 2.0k W
AV = +1.0
TA = 25°C
Vin
VO
RL
VO -
VO +
RL = 10 kW
TA = 25°C+Vsat
-Vsat
VCC = +15 V
VEE = -15 V
RL = 10 kW
+
-
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
AV = +1.0
Vin VO
RL
-
+
Falling
Rising
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
THD v 1.0%
TA = 25°C
Falling
Rising
LM833, NCV833
http://onsemi.com
5
e , INPUT NOISE VOLTAGE (nV/ )
f, FREQUENCY (Hz)
2.0
1.0
0.7
0.5
0.4
0.3
0.2
10 100 1.0 k 10 k 100 k
Figure 15. Power Supply Rejection
versus Frequency
Figure 16. Common Mode Rejection
versus Frequency
, INPUT NOISE CURRENT (pA/
Figure 17. Total Harmonic Distortion
versus Frequency
Figure 18. Input Referred Noise Voltage
versus Frequency
Figure 19. Input Referred Noise Current
versus Frequency
f, FREQUENCY (Hz) f, FREQUENCY (Hz)
f, FREQUENCY (Hz)f, FREQUENCY (Hz)
RS, SOURCE RESISTANCE (W)
PSR, POWER SUPPLY REJECTION (dB)
CMR, COMMON MODE REJECTION (dB)
THD, TOTAL HARMONIC DISTORTION (%)
n
140
120
100
80
60
40
20
0
100 1.0 k 10 k 100 k 1.0 M 10 M
1.0
0.1
0.01
0.001
10
5.0
2.0
1.0
100
10
1.0
10 100 1.0 k 10 k 100 k
1.0 10 100 1.0 k 10 k 100 k 1.0 M
140
120
100
80
60
40
20
160
100 1.0 k 10 k 100 k 1.0 M 10 M
10 100 1.0 k 10 k 100 k
VCC = +15 V
VEE = -15 V
TA = 25°C
-PSR
DVCM
DV0
× ADM
ADM
+
-
DVCM
DVO
CMR = 20 Log
VO
RL
+
-
n
+PSR = 20 Log
-PSR = 20 Log DVEE
DVO/ADM
()
DVCC
DVO/ADM
()
+PSR
DVCC
ADM
+
-
DVEE
DVO
i)
e , INPUT NOISE VOLTAGE (nV/ )
n
Figure 20. Input Referred Noise Voltage
versus Source Resistance
VCC = +15 V
VEE = -15 V
Vn(total) = (inRS)2 +en2 +
TA = 25°C4KTRS
Ǹ
√Hz
VCC = +15 V
VEE = -15 V
VCM = 0 V
DVCM = ±1.5 V
TA = 25°C
VCC = +15 V
VEE = -15 V
RS = 100 W
TA = 25°C
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
TA = 25°C
VCC = +15 V
VEE = -15 V
TA = 25°C
VO = 1.0 Vrms
VO = 3.0 Vrms
√Hz
√Hz
LM833, NCV833
http://onsemi.com
6
Figure 21. Inverting Amplifier Figure 22. Noninverting Amplifier Slew Rate
Figure 23. Noninverting Amplifier Overshoot
t, TIME (2.0 ms/DIV) t, TIME (2.0 ms/DIV)
t, TIME (200 ns/DIV)
V , OUTPUT VOLTAGE (5.0 V/DIV)
O
V , OUTPUT VOLTAGE (5.0 V/DIV)
O
V , OUTPUT VOLTAGE (10 mV/DIV)
O
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
CL = 0 pF
AV = -1.0
TA = 25°C
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
CL = 0 pF
AV = +1.0
TA = 25°C
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
CL = 0 pF
AV = +1.0
TA = 25°C
ORDERING INFORMATION
Device Package Shipping†
LM833NG PDIP−8
(Pb−Free) 50 Units / Rail
LM833DG SOIC−8
(Pb−Free) 98 Units / Rail
LM833DR2G SOIC−8
(Pb−Free) 2500 / Tape & Reel
NCV833DR2G* SOIC−8
(Pb−Free) 2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV prefix indicates qualified for automotive use.
LM833, NCV833
http://onsemi.com
7
PACKAGE DIMENSIONS
PDIP−8
N SUFFIX
CASE 626−05
ISSUE M
14
58
F
NOTE 5
D
e
b
L
A1
A
E3
E
A
TOP VIEW
CSEATING
PLANE
0.010 CA
SIDE VIEW
END VIEW
END VIEW
NOTE 3
DIM MIN NOM MAX
INCHES
A−−−− −−−− 0.210
A1 0.015 −−−− −−−−
b0.014 0.018 0.022
C0.008 0.010 0.014
D0.355 0.365 0.400
D1 0.005 −−−− −−−−
e0.100 BSC
E0.300 0.310 0.325
L0.115 0.130 0.150
−−−− −−−− 5.33
0.38 −−−− −−−−
0.35 0.46 0.56
0.20 0.25 0.36
9.02 9.27 10.02
0.13 −−−− −−−−
2.54 BSC
7.62 7.87 8.26
2.92 3.30 3.81
MIN NOM MAX
MILLIMETERS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. DIMENSION E IS MEASURED WITH THE LEADS RE-
STRAINED PARALLEL AT WIDTH E2.
4. DIMENSION E1 DOES NOT INCLUDE MOLD FLASH.
5. ROUNDED CORNERS OPTIONAL.
E1 0.240 0.250 0.280 6.10 6.35 7.11
E2
E3 −−−− −−−− 0.430 −−−− −−−− 10.92
0.300 BSC 7.62 BSC
E1
D1
M
8X
e/2
E2
c
LM833, NCV833
http://onsemi.com
8
PACKAGE DIMENSIONS
SOIC−8
D SUFFIX
CASE 751−07
ISSUE AK
SEATING
PLANE
1
4
58
N
J
X 45_
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 751−01 THRU 751−06 ARE OBSOLETE. NEW
STANDARD IS 751−07.
A
BS
D
H
C
0.10 (0.004)
DIM
A
MIN MAX MIN MAX
INCHES
4.80 5.00 0.189 0.197
MILLIMETERS
B3.80 4.00 0.150 0.157
C1.35 1.75 0.053 0.069
D0.33 0.51 0.013 0.020
G1.27 BSC 0.050 BSC
H0.10 0.25 0.004 0.010
J0.19 0.25 0.007 0.010
K0.40 1.27 0.016 0.050
M0 8 0 8
N0.25 0.50 0.010 0.020
S5.80 6.20 0.228 0.244
−X−
−Y−
G
M
Y
M
0.25 (0.010)
−Z−
Y
M
0.25 (0.010) ZSXS
M
____
1.52
0.060
7.0
0.275
0.6
0.024
1.270
0.050
4.0
0.155
ǒmm
inchesǓ
SCALE 6:1
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
LM833/D
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative