Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
DSP
ASCTB180E 201202-T
ORDERING INFORMATION
1a 8A, 1a1b/2a 5A
small polarized power
relays
DSP RELAYS
FEATURES
1. Compact with high contact rating
Even with small 10 mm .394 inch (H) x
11 mm .433 inch (W) x 20 mm .787
inch (L) (dimensions, high capacity
switching is provided: 1a, 8 A 250 V
AC; 2a and 1a1b, 5 A 250 V AC.
2. High switching capability
High contact pressure, low contact
bounce, and wiping operation improve
resistance to weld bonding. Resistant
against lamp load and dielectric
loading: 1a achieves maximum
switching capacity of 2,000 VA (8A 250
V AC).
RoHS compliant
3. High sensitivity
Using the same type of high-
perf ormance polar magnetic circuits as
DS rela ys, b y matching the spring load
to the magnetic force of attraction,
greater sensitivity has been achieved.
The resultant pick up sensitivity of
about 190 mW makes possible direct
driving of transistors and chips.
4. High breakdown voltage
Breakdown v oltage has been raised by
keeping the coil and contacts separ ate.
Conforms with FCC Part 68
5. Latching types available
6. Wide variation
Three types of contact arrangement
are offered: 1a, 2a, and 1a1b. In
addition, each is available in standard
and reversed polarity types.
7. Sealed construction allows
automatic washing.
8. Complies with safety standards
Complies with Japan Electrical
Appliance and Material Safety Law
requirements for operating 200 V
power supply circuits, and complies
with UL, CSA, and TÜV safety
standards.
9. Sockets are available.
TYPICAL APPLICATIONS
1. Office and industrial electronic
devices
2. Terminal devices of information
processing equipment, such as
printer, data recorder.
3. Office equipment (copier, facsimile)
4. Measuring instruments
5. NC machines, temperature
controller s and programmab le logic
controllers.
Between contact
and coil Between contacts
3,000 Vrms for 1 min.
5,000 V surge
breakdown voltage
1,000 Vrms for 1 min.
1,500 V surge
breakdown voltage
DSP
Nominal coil voltage
DC 3, 5, 6, 9, 12, 24 V
Contact arrangement
1a:
1:
2a:
1 Form A
1 Form A 1 Form B
2 Form A
Operating function
Nil:
L2: Single side stable
2 coil latching
Polarity
Nil:
R: Standard polarity
Reverse polarity
Contact material
• AgSnO2 type
F:
Nil: 1 Form A 1 Form B
1 Form A, 2 Form A
Notes:1. Reverse polarity types available (add suffix-R)
2. Certified by UL, CSA and TÜV
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
DSP
ASCTB180E 201202-T
TYPES
Standard packing: Carton: 50 pcs.; Case: 500 pcs.
Note: Reverse polarity type are manufactured by lot upon receipt of order. Self-clinching types are also available, please consult us.
* For sockets, see page 100.
RATING
1. Coil data
1) Single side stable
2) 2 coil latching
Contact
arrangement Nominal coil
voltage Single side stable 2 coil latching
Part No. Part No.
1 Form A
3V DC DSP1a-DC3V DSP1a-L2-DC3V
5V DC DSP1a-DC5V DSP1a-L2-DC5V
6V DC DSP1a-DC6V DSP1a-L2-DC6V
9V DC DSP1a-DC9V DSP1a-L2-DC9V
12V DC DSP1a-DC12V DSP1a-L2-DC12V
24V DC DSP1a-DC24V DSP1a-L2-DC24V
1 Form A
1 Form B
3V DC DSP1-DC3V-F DSP1-L2-DC3V-F
5V DC DSP1-DC5V-F DSP1-L2-DC5V-F
6V DC DSP1-DC6V-F DSP1-L2-DC6V-F
9V DC DSP1-DC9V-F DSP1-L2-DC9V-F
12V DC DSP1-DC12V-F DSP1-L2-DC12V-F
24V DC DSP1-DC24V-F DSP1-L2-DC24V-F
2 Form A
3V DC DSP2a-DC3V DSP2a-L2-DC3V
5V DC DSP2a-DC5V DSP2a-L2-DC5V
6V DC DSP2a-DC6V DSP2a-L2-DC6V
9V DC DSP2a-DC9V DSP2a-L2-DC9V
12V DC DSP2a-DC12V DSP2a-L2-DC12V
24V DC DSP2a-DC24V DSP2a-L2-DC24V
Nominal coil
voltage Pick-up voltage
(at 20°C 68°F)Drop-out voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)Nominal operating
power Max. applied voltage
(at 20°C 68°F)
3V DC
80%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
100mA 30Ω
300mW 130%V of
nominal voltage
5V DC 60mA 83Ω
6V DC 50mA 120Ω
9V DC 33.3mA 270Ω
12V DC 25mA 480Ω
24V DC 12.5mA 1,920Ω
Nominal coil
voltage Set voltage
(at 20°C 68°F)Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)Nominal operating
power Max. applied voltage
(at 20°C 68°F)
Set coil Reset coil Set coil Reset coil Set coil Reset coil
3V DC
80%V or less of
nominal voltage
(Initial)
80%V or less of
nominal voltage
(Initial)
100mA 100mA 30Ω30Ω
300mW 300mW 130%V of
nominal voltage
5V DC 60mA 60mA 83Ω83Ω
6V DC 50mA 50mA 120Ω120Ω
9V DC 33.3mA 33.3mA 270Ω270Ω
12V DC 25mA 25mA 480Ω480Ω
24V DC 12.5mA 12.5mA 1,920Ω1,920Ω
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
DSP
ASCTB180E 201202-T
2. Specifications
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
REFERENCE DATA
Characteristics Item Specifications
Contact Arrangement 1 Form A 1 Form A 1 Form B 2 Form A
Contact resistance (Initial) Max. 30 mΩ (By voltage drop 6 V DC 1A)
Contact material Au-flashed AgSnO2 type
Rating
Nominal switching capacity (resistive load) 8 A 250 V AC, 5A 30V DC 5 A 250 V AC, 5 A 30 V DC
Max. switching power (resistive load) 2,000 VA, 150 W 1,250 VA, 150 W
Max. switching voltage 250 V AC, 125 V DC
Max. switching current 8 A AC, 5 A DC 5 A AC, DC
Nominal operating power 300 mW
Min. switching capacity (Reference value)*110m A 5 V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdo wn voltage” section.
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA.)
Between contact sets 2,000 Vrms (1 Form A 1 Form B, 2 Form A) (Detection current: 10mA.)
Between contact and coil 3,000 Vr ms for 1min. (Detection current: 10mA.)
Surge breakdown
voltage*2between contacts and coil 5,000 V
Temperature rise (coil) (at 65°C 149°F)Max. 55°CMax. 40°CMax. 55°C
Operate time [Set time] (at 20°C 68°F)Max. 10 ms [10 ms] (Nominal coil voltage applied to the coil, e xcluding contact bounce time .)
Release time [Reset time] (at 20°C 68°F)Max. 5 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Mechanical
characteristics
Shock resistance Functional Min. 196 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Destructive Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
Vibration resistance Functional 10 to 55 Hz at double amplitude of 2 mm (Detection time: 10µs.)
Destructive 10 to 55 Hz at double amplitude of 3.5 mm
Expected life Mechanical Min. 5×107 (at 180 times/min.)
Electrical Min. 105 (resistive load)
Conditions
Conditions for operation, transport and storage*3
(Not freezing and condensing at low temperature)
Ambient temperature:
–40°C to +60°C
–40°F to +140°F
Ambient temperature:
–40°C to +65°C
–40°F to +149°F
Ambient temperature:
–40°C to +60°C
–40°F to +140°F
Solder heating 250°C 482°F (10s), 300°C 572°F (5s), 350°C 662°F (3s)
(Soldering depth: 2/3 terminal pitch)
Max. operating speed 3 cps
Unit weight Approx. 4.5 g .16 oz
1. Max. switching capacity 2.-(1) Life curve (1 Form A 1 Form B) 2.-(2) Life curve (1 Form A 1 Form B)
10
0.1 100 1000
Contact voltage, V
Contact current, V
1
10
DC resistive
load (1a)
DC resistive load
(1a1b,2a)
AC resistive
load (1a)
AC resistive
load
(1a1b,2a)
100
10
012 43765
Switching capacity, A
No. of operations, ×104
265 V·130 V AC cosϕ = 1
265 V·130 V AC
cosϕ = 0.4
100
50
10
0.5 1 105
Switching capacity, A
No. of operations, ×104
30 V DC L/R = 7 ms
30 V DC resistive
3.-(1) Coil temperature rise (1 Form A)
Tested sample: DSP1a-DC12V, 5 pcs. 3.-(2) Coil temperature rise
(1 Form A 1 Form B)
Tested sample: DSP1-DC12V, 5 pcs.
3.-(3) Coil temperature rise (2 Form A)
Tested sample: DSP2a-DC12V, 5 pcs.
50
60
40
10
20
30
080 100 120
8A
0A
Coil applied voltage, %V
Coil temperature rise, °C
50
60
40
10
20
30
080 100 120
5A
0A
Coil applied voltage, %V
Coil temperature rise, °C
50
60
40
10
20
30
080 100 120
5A
0A
Coil applied voltage, %V
Coil temperature rise, °C
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
DSP
ASCTB180E 201202-T
4.-(1) Operate & release time
(without diode, 1 Form A)
Tested sample: DSP1a-DC12V, 5 pcs.
4.-(2) Operate & release time
(without diode, 1 Form A 1 Form B)
Tested sample: DSP1-DC12V, 5 pcs.
4.-(3) Operate & release time
(without diode, 2 Form A)
Tested sample: DSP2a-DC12V, 5 pcs.)
80 100 120
4
3
2
1
0
5
6
7
Max.
x
Max.
Min.
Coil applied voltage, %V
Operate & release time, ms
x
Min.
Operate time
Release time
80 100 110
0
1
2
3
4
5
6
7
8
9
Max.
Min.
x
x
Max.
Min.
Coil applied voltage, %V
Operate & release time, ms
Operate time
Release time
80 100 120
0
1
2
3
4
5
6
7
8
9
Max.
Min.
x
x
Max.
Min.
Coil applied voltage, %V
Operate & release time, ms
Operate time
Release time
4.-(4) Operate & release time
(with diode, 1 Form A)
Tested sample: DSP1a-DC12V, 5 pcs.
4.-(5) Operate & release time
(with diode, 1 Form A 1 Form B)
Tested sample: DSP1-DC12V, 5 pcs.
4.-(6) Operate & release time
(with diode, 2 Form A)
Tested sample: DSP2a-DC12V, 5 pcs.
80 100 120
0
1
2
3
4
5
6
7
8
9
x
Min.
Max.
Min.
Coil applied voltage, %V
Operate & release time, ms
Operate time
Release time
Max.
x
80 100 110
0
1
2
3
4
5
6
7
8
9
Min.
Max.
Min.
Max.
x
Coil applied voltage, %V
Operate & release time, ms
Operate time
Release time
x
80 100 120
0
1
2
3
4
5
6
7
8
9
Max.
x
Min.
Coil applied voltage, %V
Operate & release time, ms
Operate time
Release time
Max.
Min.
x
5.-(1) Change of pick-up and drop-out voltage
(1 Form A)
Tested sample: DSP1a-DC12V, 5 pcs.
5.-(2) Change of pick-up and drop-out voltage
(1 Form A 1 Form B)
Tested sample: DSP1-DC12V, 5 pcs.
5.-(3) Change of pick-up and drop-out voltage
(2 Form A)
Tested sample: DSP2a-DC12V, 5 pcs.
–40 –20 0 20 40 60 80
50
–50
Ambient
temperature, °C
Pick-up voltage
Drop-out
voltage
(%)
Rate of change
–40 –20 0 20 40 60 80
50
–50
Ambient
temperature, °C
Pick-up voltage
Drop-out voltage
(%)
Rate of change
–40 –20 0 20 40
50
–50
Ambient
temperature, °C
Pick-up voltage
Drop-out
voltage
(%)
Rate of change
60 80
6.-(1) Influence of adjacent mounting
(1 Form A)
Tested sample: DSP1a-DC12V, 5 pcs.
6.-(2) Influence of adjacent mounting
(1 Form A 1 Form B)
Tested sample: DSP1-DC12V, 5 pcs.
6.-(3) Influence of adjacent mounting
(2 Form A)
Tested sample: DSP2a-DC12V, 5 pcs.
1050
5
10
15
5
10
15
Rate of change, %
A, C
relays
are not
energized
A, C
relays
are
energized
ABC
Pick-up voltage
Drop-out voltage
Inter-relay distance ( ), mm 123456
–8
–10
–6
–4
–2
0
0
2
4
6
8
10
Rate of change, %
A, C
relays
are not
energized
A, C
relays
are
energized
ABC
Pick-up voltage
Drop-out voltage
Inter-relay distance ( ), mm 1050
5
10
15
5
10
15
Rate of change, %
A, C
relays
are not
energized
A, C
relays
are
energized
ABC
Pick-up voltage
Drop-out voltage
Inter-relay distance ( ), mm
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
DSP
ASCTB180E 201202-T
DIMENSIONS (mm inch)
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
1. 1 Form A type External dimensions
Single side stable 2 coil latching
General tolerance: ±0.3 ±.012
0.8 0.8
0.3
10.0 10.5
3.5
1.0
20.2
7.62
7.2 1.21
10.16
0.8 0.8
0.3
10.0 10.5
3.5
1.0
1.0
20.2
7.62 7.62
7.2 1.21
2.54
0.3
11.0
7.62
.031
.012
.394 .413
.138
.039
.795
.300
.283 .048
.400
.031
.012
.394 .413
.138
.039
.039
.795
.300 .300
.283 .048
.012
.433
.300
.031 .031
.100
PC board pattern (Bottom view)
Single side stable 2 coil latching
Tolerance: ±0.1 ±.004
2.54 4-1.2 dia.
2.54
4-.047 dia.
.100
.100 2.54 6-1.2 dia.
2.54
6-.047 dia.
.100
.100
Schematic (Bottom view)
Single side stable
(Deenergized condition)
2 coil latching
(Reset condition)
8 1
+
–
16
58 1
+
–
16
52
+
–
15
CAD Data
2. 1 Form A 1 Form B type External dimensions
Single side stable 2 coil latching
General tolerance: ±0.3 ±.012
0.8 0.8
0.3
10.0 10.5
3.5
1.0
20.2
7.62
7.2 1.21
10.16
0.8 0.8
0.3
10.0 10.5
3.5
1.0
1.0
20.2
7.62 7.62
7.2 1.21
2.54
0.3
11.0
7.62
.031 .031
.100
.031
.012
.394 .413
.138
.039
.795
.300
.283 .048
.400
.031
.012
.394 .413
.138
.039
.039
.795
.300 .300
.283 .048
.012
.433
.300
PC board pattern (Bottom view)
Single side stable 2 coil latching
Tolerance: ±0.1 ±.004
6-1.2 dia.
2.54×3
2.54×3
2.54×4
6-.047 dia.
.100×3
.100×4
.100×3
8-1.2 dia.
2.54×3 2.54×3
2.54×3
2.54
8-.047 dia.
.100×3
.100×3 .100×3 .100
Schematic (Bottom view)
Single side stable
(Deenergized condition)
2 coil latching
(Reset condition)
8 1
+
–
16
5
912
1
+
–
16
2
+
–
15
85
912
CAD Data
3. 2 Form A type External dimensions
Single side stable 2 coil latching
General tolerance: ±0.3 ±.012
0.8 0.8
0.3
10.0 10.5
3.5
1.0
20.2
7.62
7.2 1.21
10.16
0.8 0.8
0.3
10.0 10.5
3.5
1.0
1.0
20.2
7.62 7.62
7.2 1.21
2.54
0.3
11.0
7.62
.031 .031
.100
.031
.012
.394 .413
.138
.039
.795
.300
.283 .048
.400
.031
.012
.394 .413
.138
.039
.039
.795
.300 .300
.283 .048
.012
.433
.300
PC board pattern (Bottom view)
Single side stable 2 coil latching
Tolerance: ±0.1 ±.004
6-1.2 dia.
2.54×3
2.54×3
2.54×4
6-.047 dia.
.100×3
.100×4
.100×3
8-1.2 dia.
2.54×3 2.54×3
2.54×3
2.54
8-.047 dia.
.100×3
.100×3 .100×3 .100
Schematic (Bottom view)
Single side stable
(Deenergized condition)
2 coil latching
(Reset condition)
8 1
+
–
16
5
912
1
+
–
16
2
+
–
15
85
912
CAD Data
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
DSP
ASCTB180E 201202-T
SAFETY STANDARDS
* Remarks: The standard certified for may differ depending on where the product was manufactured.
NOTES
For Cautions for Use.
Item UL/C-UL (Recognized) CSA (Certified) TÜV (Certified)
File No. Contact rating File No. Contact rating File No. Rating
1 Form A E43028 8A 250V AC
1/6HP 125, 250V AC
5A 30V DC
LR26550
etc. 8A 250V AC
1/6HP 125, 250V AC
5A 30V DC
B 02 10
13461 238 8A 250V AC (cos
φ
=1.0)
5A 250V AC (cos
φ
=0.4)
5A 30V DC
1 Form A
1 Form B
E43028 5A 250V AC
1/6HP 125, 250V AC
5A 30V DC
LR26550
etc. 5A 250V AC
1/6HP 125, 250V AC
5A 30V DC
B 02 10
13461 238 5A 250V AC (cos
φ
=1.0)
3A 250V AC (cos
φ
=0.4)
5A 30V DC
2 Form A E43028 5A 250V AC
1/10HP 125, 250V AC
5A 30V DC
LR26550
etc. 5A 250V AC
1/10HP 125, 250V AC
5A 30V DC
B 02 10
13461 238 5A 250V AC (cos
φ
=1.0)
3A 250V AC (cos
φ
=0.4)
5A 30V DC
1. Soldering conditions
Please obey the following conditions
when soldering automatically.
1) Preheating: Within 120°C 248°F and
within 120 seconds
2) Soldering iron: 260°C±5°C
500°F±41°F and within 6 seconds
2. Cleaning
For automatic cleaning, the boiling
method is recommended. Avoid
ultrasonic cleaning which subjects the
rela ys to high frequency vibrations, which
may cause the contacts to stick.
It is recommended that a fluorinated
hydrocarbon or other alcoholic solvents
be used.
3. External magnetic field
Since DY relays are highly sensitive
polarized relays, their characteristics will
be aff ected by a strong e xternal magnetic
field. Avoid using the relay under that
condition.
4. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different.
5. When using, please be aware that
the a contact and b contact sides of 1
Form A and 1 Form B types may go on
simultaneously at operate time and
release time.
