www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
A-14
© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in Inches (millimeters) are subject to change without notice.
Mighty Mouse
with #8 Contacts
Mighty Mouse
Contacts and Tools
A
Contact insertion and removal tools
1Insertion/Extraction Tool for #23 Contacts.
Features molded plastic grips and sturdy
stainless steel tips. Blue/White molded handle.
1 2 3 4
2Insertion Tool for #23 Contacts. This tool
features anodized aluminum handle and
stainless steel insertion tip. 4Insertion/Extraction Tool for #16 Contacts.
Use with size #16 coaxial or power contacts.
Economical molded plastic. White extraction tip,
blue insertion tip.
6Insertion/Extraction Tool for #20 Contacts.
Molded plastic. Orange extraction tip, red
insertion tip.
5Insertion/Extraction Tool for #12 Contacts.
Use with size #12 coaxial or power contacts.
Molded plastic. White extraction tip, yellow
insertion tip.
3Insertion/Extraction Tool for #20HD Contacts.
This tool features molded plastic grips and
sturdy stainless steel or Delrin tips. Molded handle
in Green/White for SS or Green/Blue for Delrin tips.
Figure Size Type Part Number Military Part
Number
Daniels Part
Number
# Insertion/Extraction 809-088 (None) (None)
# Insertion Only 809-013 (None) DAK-
#HD Insertion/Extraction 809-203 (Append D for Delrin tip) (None) (None)
# Insertion/Extraction 809-131 M/- (None)
# Insertion/extraction 809-132 M/- (None)
# Insertion/extraction 809-207 M/- (None)
Contact retention testers for size #23, #20, #16, #12 contacts (Kit or Individual Parts)
Contact Size
Handle Pin Tip Socket Tip Complete Kit
#23
809-107-1
(HT250-2)
809-107-2
(68-023-01)
809-107-3
(67-023-01) 809-107-4
#20 & 20HD
809-370-1
(HT250-4)
890-370-2
(68-020-01)
809-370-3
(67-020-01) 809-370-4
#16
809-371-1
(HT250-4)
809-371-2
(68-016-01)
809-371-3
(67-016-01) 809-371-4
#12
809-372-1
(HT250-4)
809-372-2
(68-012-01)
809-372-3
(67-012-01) 809-372-4
Check for properly seated contacts with this
spring-loaded tester. Apply the tool tip to
the mating end of a contact. Push on the
handle until the spring compresses to the
recommended force. A visual indicator shows
full compression. The contact is properly
retained if it is not displaced.
Adjust handle to appropriate settings:
Contact P/N Setting
#23 809-107-1 3.2 pounds
#20 & 20HD 809-370-1 8 pounds
#16 809-371-1 13 pounds
#12 809-372-1 13 pounds
Handle
Tip
Series 80 Mighty Mouse Contacts and Tools
Contact Insertion and Removal Tools
and Contact Retention Tester 809-107
5 6
Daniels part numbers provided in parethesis
