— EE102 —
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
Aluminum Electrolytic Capacitors/ GA(L:7mm)
GA A
Series: Type :
-55 to + 105°C
10 to 50 V .DC
0.1 to 220 µ F
±20 % (120Hz/+20°C)
I < 0.01 CV or 3(µ A) after 2 minutes (Whichever is greater)
Japan
Malaysia
China
Endurance:105°C 1000 h
RoHS directive compliant
Category temp. range
Rated W.V. Range
Nominal Cap. Range
Radial Lead Type
n Features
n Specifications
DC Leakage Current
tan δ
Capacitance Tolerance
Endurance
After following life test with DC voltage and +105±2°C ripple current value applied (The sum of
DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall
meet the limits specified below.
Capacitance change
tan δ
DC leakage current
± 20% of initial measured value
< 200 % of initial specified value
< initial specified value
Shelf Life After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitor shall meet the limits specified in Endurance.(With voltage treatment)
Sleeve
n Dimensions in mm (not to scale)
Please see the attached standard products list
Country of Origin
Body Dia. φD
Lead Dia. φd
Lead space P
4 5 6.3 8
0.45 0.45 0.45 0.45
1.5 2.0 2.5 2.5
L = 7
L+0.1 max
P±0.5
φD+0.5 max
φd±0.05
14 min 3 min
(mm)
— EE103 —
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
Aluminum Electrolytic Capacitors/ GA(L:7mm)
nStandard Products(L:7mm)
When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, H=2.5mm.
Suffix "BQ" for φ8×7, 5mm pitch products
The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide.
22 4 7 30 0.22 1000 0.45 1.5 5.0 2.5 EEAGA1A220( ) 200 2000
33 5 7 50 0.22 1000 0.45 2.0 5.0 2.5 EEAGA1A330( ) 200 2000
47 6.3 7 65 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A470( ) 200 2000
68 6.3 7 75 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A680( ) 200 2000
100 6.3 7 110 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A101( ) 200 2000
220 8 7 160 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A221( ) 200 1000
10 4 7 30 0.18 1000 0.45 1.5 5.0 2.5 EEAGA1C100( ) 200 2000
15 4 7 33 0.18 1000 0.45 1.5 5.0 2.5 EEAGA1C150( ) 200 2000
22 5 7 50 0.18 1000 0.45 2.0 5.0 2.5 EEAGA1C220( ) 200 2000
33 6.3 7 65 0.18 1000 0.45 2.5 5.0 2.5 EEAGA1C330( ) 200 2000
47 6.3 7 77 0.18 1000 0.45 2.5 5.0 2.5 EEAGA1C470( ) 200 2000
100 8 7 120 0.18 1000 0.45 2.5 5.0 2.5 EEAGA1C101( ) 200 1000
10 4 7 33 0.16 1000 0.45 1.5 5.0 2.5 EEAGA1E100( ) 200 2000
15 5 7 45 0.16 1000 0.45 2.0 5.0 2.5 EEAGA1E150( ) 200 2000
25 22 5 7 50 0.16 1000 0.45 2.0 5.0 2.5 EEAGA1E220( ) 200 2000
33 6.3 7 75 0.16 1000 0.45 2.5 5.0 2.5 EEAGA1E330( ) 200 2000
68 8 7 100 0.16 1000 0.45 2.5 5.0 2.5 EEAGA1E680( ) 200 1000
6.8 4 7 33 0.13 1000 0.45 1.5 5.0 2.5 EEAGA1V6R8( ) 200 2000
10 5 7 35 0.13 1000 0.45 2.0 5.0 2.5 EEAGA1V100( ) 200 2000
35 15 6.3 7 50 0.13 1000 0.45 2.5 5.0 2.5 EEAGA1V150( ) 200 2000
22 6.3 7 70 0.13 1000 0.45 2.5 5.0 2.5 EEAGA1V220( ) 200 2000
47 8 7 96 0.13 1000 0.45 2.5 5.0 2.5 EEAGA1V470( ) 200 1000
0.1 4 7 1.1 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR10( ) 200 2000
0.15 4 7 1.7 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR15( ) 200 2000
0.22 4 7 2.3 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR22( ) 200 2000
0.33 4 7 3.5 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR33( ) 200 2000
0.47 4 7 5 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR47( ) 200 2000
0.68 4 7 7 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR68( ) 200 2000
1 4 7 10 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H1R0( ) 200 2000
1.5 4 7 16 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H1R5( ) 200 2000
2.2 4 7 18 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H2R2( ) 200 2000
3.3 4 7 22 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H3R3( ) 200 2000
4.7 4 7 26 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H4R7( ) 200 2000
6.8 5 7 35 0.10 1000 0.45 2.0 5.0 2.5 EEAGA1H6R8( ) 200 2000
10 6.3 7 39 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H100( ) 200 2000
15 6.3 7 55 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H150( ) 200 2000
22 8 7 70 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H220( ) 200 1000
33 8 7 91 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H330( ) 200 1000
10
16
50
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(mA)
(V) (hours)
iH
Lead Space
Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%)
Lead
Dia.
W.V.
Straight
Min. Packaging Q'ty
Taping
Taping
Ripple
current
(120Hz)
(+105°C)
Lead Length
Straight
Leads
iB
Endur-
ance
tan δ
(120Hz)
(+20°C)
