
IPS511G/IPS512G
www.irf.com 3
Recommended Operating Conditions
These values are given for a quick design. For operation outside these conditions, please consult the application notes.
Symbol Parameter Min. Max. Units
Vcc Continuous Vcc voltage 5.5 35
VIH High level input voltage 4 5.5
VIL Low level input voltage -0.3 0.9
Iout Continuous output current
Tamb=85oC (TAmbient = 85oC, Tj = 125oC, rth = 100oC/W) IPS511G — 1.4
Iout Continuous output current per leg
Tamb=85oC (TAmbient = 85oC, Tj = 125oC Rth = 85oC/W both legs on) IPS512G — 1.0
Rin Recommended resistor in series with IN pin 4 6
Rdg Recommended resistor in series with DG pin 10 20
V
A
kΩ
Symbol Parameter Min. Typ. Max. Units Test Conditions
Rds(on) ON state resistance Tj = 25oC — 130 150
@Tj=25oC
Rds(on) ON state resistance @ Vcc = 6V — 130 150
(Vcc=6V)
Rds(on) ON state resistance Tj = 150oC—
220 —Vin = 5V, Iout = 2.5A
@Tj=150oC
Vcc oper. Operating voltage range 5.5 —35
V clamp 1 Vcc to OUT clamp voltage 1 50 56 —Id = 10mA (see Fig.1 & 2)
V clamp 2 Vcc to OUT clamp voltage 2 — 58 65
VfBody diode forward voltage — 0.9 1.2 Id = 2.5A, Vin = 0V
Icc off Supply current when OFF — 16 50 µAV
in = 0V, Vout = 0V
Icc on Supply current when ON — 0.7 2 mA Vin = 5V
Icc ac Ripple current when ON (AC RMS) —20 —µAV
in = 5V
Vdgl Low level diagnostic output voltage — 0.15 0.4 V Idg = 1.6 mA
Iol Output leakage current — 60 120 Vout = 6V
Iol Output leakage current 0 — 25 Vout = 0V
Idg
leakage Diagnostic output leakage current ——10 Vdg = 5.5V
Vih IN high threshold voltage — 2.3 2.5
Vil IN low threshold voltage 1 2 —
Iin, on On state IN positive current —70 200 µAVin = 5V
In, hyst. Input hysteresis 0.1 0.25 0. 5 V
Static Electrical Characteristics
(Tj = 25oC, Vcc = 14V unless otherwise specified.)
mΩ
Vin = 5V, Iout = 2.5A
Id = Isd (see Fig.1 & 2)
V
Vin = 5V, Iout = 1A
µA
V