A Product Line of Diodes Incorporated FMMT591A 40V PNP MEDIUM POWER HIGH PERFORMANCE TRANSISTOR IN SOT23 Features Mechanical Data * BVCEO > -40V * * IC = -1A High Continuous Current * * ICM = -2A Peak Pulse Current Case: SOT23 Case Material: Molded Plastic, "Green" Molding Compound UL Flammability Classification Rating 94V-0 * Low Saturation Voltage VCE(sat) < -500mV @ -1A * * RSAT = 350m for a Low Equivalent On-resistance * * Complementary NPN type: FMMT491A * Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) * Halogen and Antimony Free. "Green" Device (Note 3) Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 * Qualified to AEC-Q101 Standards for High Reliability * PPAP Capable (Note 4) * Weight: 0.008 grams (approximate) Application * Power MOSFET gate driving * Low loss power switching C E SOT23 C B B E Device Symbol Top View Top View Pin-Out Ordering Information (Notes 4 & 5) Product FMMT591ATA FMMT591ATC FMMT591AQTA Notes: Compliance AEC-Q101 AEC-Q101 Automotive Marking 91A 91A 91A Reel size (inches) 7 13 7 Tape width (mm) 8 8 8 Quantity per reel 3,000 10,000 3,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen and Antimony free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/. 5. For packaging details, go to our website at http://www.diodes.com/products/packages.html Marking Information 91A 589 FMMT591A Document number: DS33105 Rev. 5 - 2 91A = Product Type Marking Code 1 of 7 www.diodes.com December 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT591A Absolute Maximum Ratings (@TA = +25C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Base Current Peak Base Current Symbol VCBO VCEO VEBO IC ICM IB IBM Value -40 -40 -7 -1 -2 -200 -1 Unit V V V A A mA A Value 500 250 197 -55 to +150 Unit mW C/W C/W C Thermal Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Operating and Storage Temperature Range (Note 6) (Note 6) (Note 7) Symbol PD RJA RJL TJ, TSTG ESD Ratings (Note 8) Characteristic Electrostatic Discharge - Human Body Model Electrostatic Discharge - Machine Model Notes: Symbol ESD HBM ESD MM Value 4,000 400 Unit V V JEDEC Class 3A C 6. For a device mounted with the collector lead on 15mm x 15mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. FMMT591A Document number: DS33105 Rev. 5 - 2 2 of 7 www.diodes.com December 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT591A Thermal Characteristics and Derating Information FMMT591A Document number: DS33105 Rev. 5 - 2 3 of 7 www.diodes.com December 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT591A Electrical Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 9) Emitter-Base Breakdown Voltage Collector Cutoff Current Collector-Emitter Cutoff Current Emitter Cutoff Current Symbol BVCBO BVCEO BVEBO ICBO ICES IEBO Collector-Emitter Saturation Voltage (Note 9) VCE(sat) Base-Emitter Saturation Voltage (Note 9) Base-Emitter Turn-On Voltage (Note 9) VBE(sat) VBE(on) Static Forward Current Transfer Ratio (Note 9) Transition Frequency Output Capacitance Switching Time Note: Delay Time Rise Time Storage Time Fall Time Min -40 -40 -7 hFE 300 300 250 160 30 fT 150 Cobo t(d) t(r) t(s) t(f) Typ Max -100 -100 -100 Unit V V V nA nA nA -200 -350 -500 mV -1.1 -1.0 V V 800 00 MHz 34.9 19.2 249 62 10 pF ns Test Condition IC = -100A IC = -10mA IE = -100A VCB = -30V VCES = -30V VEB = -5.6V IC = -100mA, IB = -1mA IC = -500mA, IB = -20mA IC = -1A, IB = -100mA IC = -1A, IB = -100mA IC = -1A, VCE = -5V IC = -1mA, VCE = -5V IC = -100mA, VCE = -5V IC = -500mA, VCE = -5V IC = -1A, VCE = -5V IC = -2A, VCE = -5V VCE = -10V, IC = -50mA, f = 100MHz VCB = -10V, f = 1MHz VCC = -10V, IC = -500mA, IB1 = -IB2 =-25mA 9. Measured under pulsed conditions. Pulse width 300s. Duty cycle 2% FMMT591A Document number: DS33105 Rev. 5 - 2 4 of 7 www.diodes.com December 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT591A Typical Electrical Characteristics (@TA = +25C, unless otherwise specified.) FMMT591A Document number: DS33105 Rev. 5 - 2 5 of 7 www.diodes.com December 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT591A Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. 7 l l A H SOT23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.890 1.00 0.975 K1 0.903 1.10 1.025 L 0.45 0.61 0.55 L1 0.25 0.55 0.40 M 0.085 0.150 0.110 a 8 All Dimensions in mm J K 1 K a M A 1 L L B C D Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. Y Z C X FMMT591A Document number: DS33105 Rev. 5 - 2 Dimensions Value (in mm) Z 2.9 X 0.8 Y 0.9 C 2.0 E 1.35 E 6 of 7 www.diodes.com December 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT591A IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2013, Diodes Incorporated www.diodes.com FMMT591A Document number: DS33105 Rev. 5 - 2 7 of 7 www.diodes.com December 2013 (c) Diodes Incorporated